No video
Mercedes Front Left SRS (Airbag) Malfunction - FIX
How to fix front left malfunction on your Mercedes. SRS/Airbag malfunction fix. This is a common issue with Mercedes vehicles, often caused by spillages or certain cleaning products on the seats. Quick video to show how to replace the seat recognition pad.
Shown on a w204 but goes for all the Mercedes range. Hope it helps some out :-)
#airbag #srs #w204
Пікірлер: 44
Thanks a lot, it helped me very well.
THANK YOU 👍
thanks sorted my w205 had the same problem 👍
@godfreysautomotiveservices
Жыл бұрын
Glad it helped!
thank you very much
Specifically, What error code alpha numbering sequence did you get for this occupancy sensor? I’m trying to see if this video even applies to the problem that I am having.
Would this be the same for a 2014 CLA?
I have an Infiniti qx30 having the same issue. Does this same fix apply?
hello. what was the code number of error? and how much did you pay for for new sensor ?
I got the parts mixed up I need the driver side
I've got the same problem Mot not getting passed for it
Hi. Have a question. My w164 is LH drive and I got that message also on front left seat which is driver seat. Do I have same electrical strip as you replaced? Thanx for reply!
@godfreysautomotiveservices
Жыл бұрын
Hi, no you won’t have the seat recognition pad on yours if it’s the drivers seat. Will need to be plugged in to see what fault code you have 👍
@jakeeconnor
Жыл бұрын
I have a question please how to fix b2735-13 mercedes check code srs
That's a great video I was working on a Benz 2018 s560 wiv code error B1F7D54 and saying front left malfunction consult workshop on the dash any idea please? Do you think it's the same issue ?
@godfreysautomotiveservices
Жыл бұрын
Hi, no I don’t think it will be the same on yours, has your vehicle had any recent work carried out on the seat? Could be a basic setting required..
@dashtyATG
Жыл бұрын
@@godfreysautomotiveservices Hy thanks for your reply. And no there was previous work done b4. What do you mean the basic setting please?
@godfreysautomotiveservices
Жыл бұрын
@@dashtyATG sometimes the seat will need re-learning, this is done through a star machine or suitable diagnostic tool. Might be worth a try first buddy
Is it the same for any model under c300 c-class? I have a 2011 c300 c-class wondering if I can do this process on my car.
@godfreysautomotiveservices
Жыл бұрын
Yes, it will be 👍
Hello mine is a B class 200 CDI 2007 model it’s showing the below. Please help 9007 The component or the signal line to the component S68/1 (seat belt buckle and seat belt warning switch, driver ) has short circuit to positive or Open circuit
@godfreysautomotiveservices
Жыл бұрын
Hi, sounds like yours just requires a new seatbelt buckle 👍
I have a similar fault on the same year and model but its the drivers seat but we have noticed it don't beep when driving without seat belt connected, am I right thinking it's the buckle.at fault
@godfreysautomotiveservices
5 ай бұрын
Yes, that would normally indicate the buckle at fault 👍
Damn it! I just disconnected yellow and black plugs underneath the drivers seat and after plug it on again, I got this red light light on panel 🤦🏻♂️
Damn I got the message for both L&R and the left rear blinker is also out…. Any ideas on that one?? Cheers 🙏
@godfreysautomotiveservices
Жыл бұрын
Most likely be your seat buckle 👍
Wher are u located
Where can I buy them pads from
@godfreysautomotiveservices
Жыл бұрын
I get them direct from my Mercedes dealership bud
Is there anyway to by pass this to keep light off ,warranty will nkt cover water damaged or Corroded parts typical just wet vaced seats and lights comes on the next day
Hi I have been told by the MB main dealer in my area that they don’t sell this sensor anymore?
@godfreysautomotiveservices
Жыл бұрын
Hi, I find that hard to believe, if you email me your regh I can contact my dealer for availability 🙂
@robbienathan8615
Жыл бұрын
@@godfreysautomotiveservices that would be awesome, what’s your email? I can send you the reg
@godfreysautomotiveservices
Жыл бұрын
@@robbienathan8615 info@godfreysautomotive.co.uk
@robbienathan8615
Жыл бұрын
@@godfreysautomotiveservices just sent it through mate, Cheers!
@robbienathan8615
Жыл бұрын
Got me one of the emulator things for now and trying to fit it in. At 3:16 you used a screw driver and hammer to remove the wire from the yellow block? Is that the only way ? Been fiddlin with mine for hours and thing is jammed in
My srs door airbag is on
What’s the name of the scanner?
@godfreysautomotiveservices
Жыл бұрын
Autel MK906 pro
How much does the pad senor cost from mercedes
@debbiefogleman3963
2 ай бұрын
?
Hi need some help here my car airbag light has come on also tryed erasing it on my obd2 scanner but keeps on coming back it says squib for the driver knee airbag has a malfunction open circuit B000413 code