MERCEDES C-CLASS W204 - How To Replace Front Brake Discs & Pads Change Swap Replacement (295mm Disc)
Автокөліктер мен көлік құралдары
How to replace the front brake discs and pads on a Mercedes-Benz C-Class W204 (295mm diameter disc).
Tools used:
-13mm Socket: amzn.to/3luPyQv
-17mm / 18mm Socket: amzn.to/3v4ZdBR
-T30 Torx: amzn.to/2NWrfON
-17mm Spanner: amzn.to/3rllU2m
-Flat Screwdriver: amzn.to/3qRPuMn
-Mole Grips: amzn.to/3eUV4KV
-Brake Cleaner: amzn.to/3ncWAtU
-Hammer: amzn.to/3fLmVO4
-------------------------------
www.selectvehiclespares.co.uk
-------------------------------
Пікірлер: 43
Tools used: -13mm Socket: amzn.to/3luPyQv -17mm / 18mm Socket: amzn.to/3v4ZdBR -T30 Torx: amzn.to/2NWrfON -17mm Spanner: amzn.to/3rllU2m -Flat Screwdriver: amzn.to/3qRPuMn -Mole Grips: amzn.to/3eUV4KV -Brake Cleaner: amzn.to/3ncWAtU -Hammer: amzn.to/3fLmVO4
Fantastic tutorial. I completed my first ever brake discs and pads change yesterday following this. You also showed me how to do an oil and filter change previously. Thanks so much. Perhaps you should put a link for people to buy you a coffee (or a pint) somewhere in the description? 👍
I have never changed Discs or Pads on any vehicle I've owned but after watching this video I may attempt. A super video and audio description . Well done.
Thanks for that video, really simple to follow.
Really great video. Clear instructions and made it look simple and easy. This video will save me a couple thousand dollars by doing the service myself when ready.
@SelectVehicleSpares
2 жыл бұрын
Great to hear!
@imhungry2387
2 жыл бұрын
A couple thousand dollars you need to stop going wherever you been going
This is a job I'm planning to do in the coming days,useful informative video. Ty.
Top class video and workmanship !
brilliant video will be doing all 4 of mine this summer
Very good technique..!!!
That video was perfect!!!
Great deeply detailed video. I’ve noticed there are 2 different caliper designs with these model years and it definitely makes a difference.
@murraygreen8706
2 жыл бұрын
Absolutely! If you have one that isn't shown in any video I have found there are some surprises. Just record your removal and replace the same. There is a spring holding the outer pad which may give you some grief. Can't find any torque numbers. In the dealer manual no doubt Use locktite
@iTsTHumpa
2 жыл бұрын
@@murraygreen8706 luckily mine didn’t have a spring. Unless you’re talking about the piston? Just push it in with a c clamp 🗜 and good to go
@murraygreen8706
2 жыл бұрын
Glad you didn't have to deal with the spring. I have only seen one image on the internet that looks like my car but no info.
Best video.
Can you do a video for the rear brakes please? 🤞🏼
Thanks!
Hey great video... was wondering if that black plate on your caliper that usually says mercedes benz is removeable for the w204? Also copper, aluminum, silicone, purple ceramic... which is best for brake jobs the amount of different materials for the same job makes this confusing. I bought some purple ceramic which they said is supposed to be the cream of the crop and I think it actually is causing my brakes to stick and freeze by turning into a gum sort of mess combined with the brake dust.
Is it the same process for W205 C250 Sport
Bonjour, merci pour la vidéo, ma question est-ce que il y a un seul sens de montage du disque en fonction du sens de rotation de la roue
I've watch Yr vid and though am going give it a go..you made it look so easy..when I put the discs and pads on though I turned them by hand and could here a on off scraping sound and the discs were marked where the pads where rubbing..thought they just need bedding in so put wheels back on for test drive only to smell burning and see smoke..is this normal for new pads and discs
@timb7775
Жыл бұрын
If you compressed the caliper piston all the way back you should not get the pads scraping the rotors. Did you use OEM or aftermarket parts?
Great video but missing bit I need. I have brembo directional pads can't tell which way
@SelectVehicleSpares
2 жыл бұрын
Are there arrows on the back of the pads? If so, these should point in the direction that the disc goes when travelling forwards.
Couple of points. It would have been best to use thread lock on the carrier bolts. Mercedes do that. Also, no need to clean the metal clips as new ones come with the new pads.
👍👍👍👍
What is the correct torque for these things though?
Bro i just want to ask that bosch disc and break pads are good for this car or we can go for mercedes original?
Are there torque specs for both front and rear?
@timb7775
Жыл бұрын
Rotor screw 10nm. Caliper bolts 34nm. Brake carrier bolts 110nm. Front. Rear should be similar.
Perfect job but on Mercedes i prefer Textar brake pads.....!
I did all that but now the caliper carrier is scraping with the new rotor
@mumtazzafar5696
Ай бұрын
It's not properly fitted
❤👍✍️
Wish I’d watched this video first! None of the other guides I watched had a plate on the calliper. I tried to remove mine so that I could use the piston return tool and it snapped off. It doesn’t seem like the most critical component so I’m hoping that it won’t cause issues. I don’t suppose you can shed some light on it?
@SelectVehicleSpares
3 жыл бұрын
Do you mean the plates on each end of the caliper where the brake pads slide in to? If so, yes these are required, nothing should be missing from the brake setup, they are there from the factory for a reason.
@dj_notnice
Жыл бұрын
It’s just a plate used for decals such as AMG
Is there no need to bleed the brakes? Will it be okay if I just change the pads or do you need to bleed the brakes then?
@SelectVehicleSpares
7 ай бұрын
There is no need to bleed the brakes when changing discs and pads.
@lf7161
7 ай бұрын
@@SelectVehicleSparesthanks , I just plan on changing pads so I will have to bleed the brakes then 👍
This is a wrong way to push the caliper from one side because it would damage a piston and sometimes it goes in just from the top the way you push it in.