Thanks for the upload, I've came across this problem and all my experience is in FWD cars so I hit the part where the shield can't clear the hub flange (oh darn) then researched just how much stripping you need to get the cheapest part off and it's incredible!

Exactly what I needed! I have all the gear, quality street lid, skint knuckle stuff included😀

@mikesmithroller

2 жыл бұрын

Brought me a smile. Thanks fella.

So glad I've watched this, after replacing brake pipes as your other video shows, I've also had to replace backplates & shoes. Thanks for the tips.

@mikesmithroller

4 жыл бұрын

Sounds like your Merc is about the same condition as mine! Have you checked the front plates? I had to do all 4 of mine at the same time.

I lost hope when I took the disc off. Thanks for brilliant idea. I wonder how many people have seen this video after dismantling half of their cars.

I have a W212 and mercedes just replaced the rear subframe free of charge under extended warranty , however they did sting me for other work, BUT they never mentioned the rear disc mud guards had holes in them, Its a later model than yours so i hope i can do the same as you as there is no way i want to pull the hub off, Many thanks its what i needed to see.

Klej do szyb samochodwych tylko trzeba odtłuscic.

That’s the way to do it, no problem job done,excellent video 👍

Thank you so much! Definitely saved my day!

I guess this would work on the W202 as well as the setup looks identical. Will order some cheap back plates to butcher and get this done as I fear there is already a lot of rotational play in my handbrake lol. RIDEX brand off autodoc are cheap :). The rear bearings frequently get damaged removing them to do this job and it's a false economy not to change them anyway. However I fail to see the point in destroying/ changing bearings which have no play and make no noise just to change a cheap bit of tin plate. Thanks for the video :)

Now that's what I call DIY !!.....although my local mechanic did it for me 😉...excellent 👍💋

Oh boy, you are a life saver, thank you

Thanks to this video was able to do my clk500 thank you

Brilliant idea, save a lot of work

@mikesmithroller

4 жыл бұрын

Thanks ... hope it was useful

Good video super Thank you

Brilliant thanks!

Thank you very much for this! I think I will do it this way too. What adhesive sealant did you use?

@mikesmithroller

4 жыл бұрын

Hi ... it was one of the modified polymer sealants, I think I used Puraflex 40 although that's only because I had some laying around. There are no rattles from the back end, so I guess it has done the job! good luck.

Genius!

Excellent

back plate one cut at narrowest point with a hacksaw no grinders

Evalaner 2008 3.5 hou to replace well peuring

hi what adessive did you use please

@mikesmithroller

Жыл бұрын

Hi ... it was one of the modified polymer sealants, I think I used Puraflex 40 although that's only because I had some laying around. There were no rattles from the back end, so I guess it has done the job! good luck.

i got two back plates from mercedes delivered £16. 60 for my veto

@mikesmithroller

4 жыл бұрын

worth checking with your Merc dealer for sure, they can sometimes be surprisingly cheap. I just replaced a (genuine) rear lower control arm on mine for less than some of the used ones on eBay.

PATRICK

@patricklucien1679

10 ай бұрын

MERCI BEAUCOUP super cela m a été très utile thank's