IN THIS VIDEO I SHOW HOW TO RESTORE SOME OLD FOGGY HEADLIGHTS.
Жүктеу.....
Пікірлер: 27
@donnovicki9771Ай бұрын
I used this on my gauge cluster and it did a bang up job. Haven't tried it on the headlights yet.
@russellwade78106 ай бұрын
Iv just used exactly the same procedure on my vans headlight and they was bad but i used a sponge to polish on the drill and they are like new. 👍
@STILLNIGHTPEARL2 жыл бұрын
Nice work man! That looked like an etching on the outside of the light, looks like a chemical of some sort dripped down, you can scrape it down with a razor, then sand with 600,1000,3000. Scraping it down with a razor is faster than sanding, it’s what body shop guys do to flatten runs after a paint job, works quick. If you would’ve sanded longer with the 400, you would’ve removed it completely, but the razor does a much faster job.
@matthewreynolds27782 жыл бұрын
Nice job bro looks great😎
@RobertG1690
2 жыл бұрын
Thank you👍
@reowhite48623 жыл бұрын
I used that kit on my girlfriends car and the headlights looked great....for about 6months then they went right back to looking like shit!
@RobertG1690
3 жыл бұрын
Sorry to hear that . Try using 400 grit. 1000, 2000 ,finally 3000 grit. Compound then the sealant. There should be no reason after that y it fails. Might be you didn't go all the way down to 400 grit . Many times 1000 grit is not enough
@reowhite4862
3 жыл бұрын
@@RobertG1690 I did do all those steps but it wasnt enough for the harsh Texas sun
@MichaelBrianInc
3 жыл бұрын
@@reowhite4862 how did you seal the headlight after compound/polishing? Clear coating can last a good year of protection or you can use Carnauba wax but that’ll last 4-6 months.
@chrispinmwando225
3 жыл бұрын
You needed to sealed them with a ceramic coat
@damionhall87143 жыл бұрын
I have a 2003 nissan b15 needs to get to that level
@RobertG1690
3 жыл бұрын
How did it turn out?
@masterjack8222 Жыл бұрын
Genuine question ,since you wet santed the surface, didnt it stripped the clearcoat ? So after the restoration the headlight have no protection right ?
@linkstale
Жыл бұрын
Yep me personally I would add meguiars clear coat spray
@buddahkahn6911
22 күн бұрын
U can spray clear for back in light
@reverscrypto76382 ай бұрын
400 is crazy on a headlight
@ivanvelez76686 ай бұрын
wow awesome. I am thinking of restoring my headlights.But it's raining in my location. Is this best to do it on a dry day??
@RobertG1690
6 ай бұрын
Yes
@ivanvelez7668
6 ай бұрын
@@RobertG1690 can I use this product on the other lights such as the fog lights. turning signal lights both fron and. back??
@kojam1 Жыл бұрын
I'm gonna wanna but I'm not gonna actually do a darn thing. Too much work
@thelastmojican44803 жыл бұрын
Not bad buddy
@xXBetoXx956 Жыл бұрын
What’s that yellow pad name ?
@buddahkahn6911
22 күн бұрын
It's a cutting pad light cutting pad
@reowhite48623 жыл бұрын
Wun dowzan Toodowzen...tree dowzen...
@user-cq7gd5bo4m
3 жыл бұрын
Lmfao 🤣
@luisponce147211 ай бұрын
No need for Sand Paper i use 3d tooth paste
@buddahkahn6911
22 күн бұрын
Toothpaste is worse plus it's temporary and in heat the chemicals burn it to the plastic
Пікірлер: 27
I used this on my gauge cluster and it did a bang up job. Haven't tried it on the headlights yet.
Iv just used exactly the same procedure on my vans headlight and they was bad but i used a sponge to polish on the drill and they are like new. 👍
Nice work man! That looked like an etching on the outside of the light, looks like a chemical of some sort dripped down, you can scrape it down with a razor, then sand with 600,1000,3000. Scraping it down with a razor is faster than sanding, it’s what body shop guys do to flatten runs after a paint job, works quick. If you would’ve sanded longer with the 400, you would’ve removed it completely, but the razor does a much faster job.
Nice job bro looks great😎
@RobertG1690
2 жыл бұрын
Thank you👍
I used that kit on my girlfriends car and the headlights looked great....for about 6months then they went right back to looking like shit!
@RobertG1690
3 жыл бұрын
Sorry to hear that . Try using 400 grit. 1000, 2000 ,finally 3000 grit. Compound then the sealant. There should be no reason after that y it fails. Might be you didn't go all the way down to 400 grit . Many times 1000 grit is not enough
@reowhite4862
3 жыл бұрын
@@RobertG1690 I did do all those steps but it wasnt enough for the harsh Texas sun
@MichaelBrianInc
3 жыл бұрын
@@reowhite4862 how did you seal the headlight after compound/polishing? Clear coating can last a good year of protection or you can use Carnauba wax but that’ll last 4-6 months.
@chrispinmwando225
3 жыл бұрын
You needed to sealed them with a ceramic coat
I have a 2003 nissan b15 needs to get to that level
@RobertG1690
3 жыл бұрын
How did it turn out?
Genuine question ,since you wet santed the surface, didnt it stripped the clearcoat ? So after the restoration the headlight have no protection right ?
@linkstale
Жыл бұрын
Yep me personally I would add meguiars clear coat spray
@buddahkahn6911
22 күн бұрын
U can spray clear for back in light
400 is crazy on a headlight
wow awesome. I am thinking of restoring my headlights.But it's raining in my location. Is this best to do it on a dry day??
@RobertG1690
6 ай бұрын
Yes
@ivanvelez7668
6 ай бұрын
@@RobertG1690 can I use this product on the other lights such as the fog lights. turning signal lights both fron and. back??
I'm gonna wanna but I'm not gonna actually do a darn thing. Too much work
Not bad buddy
What’s that yellow pad name ?
@buddahkahn6911
22 күн бұрын
It's a cutting pad light cutting pad
Wun dowzan Toodowzen...tree dowzen...
@user-cq7gd5bo4m
3 жыл бұрын
Lmfao 🤣
No need for Sand Paper i use 3d tooth paste
@buddahkahn6911
22 күн бұрын
Toothpaste is worse plus it's temporary and in heat the chemicals burn it to the plastic