Such high quality videos, keep up the good work randy 🤙🏽

I'm not a miata owner but a speed3 owner but found this video very educational, being heavy into the. Speed3 scene, I've been a sub for quite some time now, love your enthusiasm and details, my speed3. Makes 380whp 402wtq on the dyno and I credit your videos for some of the info on parts I used, thanks keep up the great work!

@FiveFiveGarage

6 жыл бұрын

Appreciate it! Keep an eye out I have a Speed 3 suspension upgrade vid on the horizon, can't let my Miata be the only one living the low life!

@Whatguywhat

Жыл бұрын

@@FiveFiveGarage do you have preload instructions?

@FiveFiveGarage

Жыл бұрын

www.springrates.com/blogs/blog/how-to-adjust-suspension-preload This is the article I read on it back before I installed anything.

Hey first time watching your vids... great job bro. Keep up the good work. I just put my order on for the earlier today for my EP3.

@FiveFiveGarage

4 жыл бұрын

I am very happy with mine. Will be happier when I get my engine back in the car..LOL

loving your videos man!

Thanks for the awesome video. I work at Megan Racing and it's pronounced May-ghen, not meeee-gan. Awesome stuff and hope you enjoy those. you should setup the rears with about 12-15mm of spring pre-load compression and 5-7mm in the fronts.

@FiveFiveGarage

5 жыл бұрын

Thanks for the setup hints and I am so sorry about butchering the name! 👍

@brianesquivel1314

5 жыл бұрын

Not a worry. Happens about 10 times a week

@InFiD3ViL1

4 жыл бұрын

I have this exact model setup (EZ Street II) sitting in a box in my living room for my 2010 Camaro SS. If you have any pre-load tips for me I would be happy to listen!

@dorothyhite3044

3 жыл бұрын

I got the EZI Megan racing coilovers for my Pontiac g8 09 and I’ve had a guy helping me to put them on and he has taken over 10 hours to put only the front two on and they’re not even on right... is there a video I can watch? I can’t find any videos or anything to help..

@FiveFiveGarage

3 жыл бұрын

10 hours? It shouldn't take that long! It is a remove/replace so once the stock stuff is out, it goes in. What problem are you running into?

I just noticed but thank you all for the 1,000 subs! 😍👍

@mattcole8923

6 жыл бұрын

Five Five Garage well deserved. Nice editing, music, knowledgable. Good stuff.

@FiveFiveGarage

6 жыл бұрын

Thanks!

Thank you for the video! Amazing job!

@FiveFiveGarage

5 жыл бұрын

Thanks!

Legit video! Great job!

Picked up the same coilovers for my BB6 Prelude. I'm going to stay conservative with it and only drop it maybe an inch or so. Hopefully they will be a good purchase!

@FiveFiveGarage

4 жыл бұрын

Mine are still going strong. Good idea on the conservative drop. I have been really pleased with mine.

@Saisei87

4 жыл бұрын

@@FiveFiveGarage good to hear. I liked your video, very informative but I'm still gonna have my local garage put them on I think.

@FiveFiveGarage

4 жыл бұрын

If you haven't done it before, that is not a bad idea. Getting the stock suspension was a complete pain (that's why I used the long bolt method), and if you don't have all the tools on hand it makes for a frustrating time. Once you get them in, let me know how it goes!

@Saisei87

4 жыл бұрын

@@FiveFiveGarage will do...its in the shop right now should be done before the end of today! Heres hoping for a better handling whip and less squeaky and noisy 🤞🤞 (23 yr old struts and springs will do that i suppose)

@Saisei87

4 жыл бұрын

@@FiveFiveGarage so I got them on and so far so good! Super quiet now! Improved handling! A noticeable lower center of gravity! I just have to be hella careful pulling in and out of my driveway and other bumps and slopes/hills because my exhaust pipe ( near the middle of the car) will scrape.

Excellent Video! Thank

Going to Order them on monday 11/04/2019 from Vex Motorsports of Santa Clara, Ca...lets see how they go I cherried out a 2001 Celica with a veilside body kit, but I need a some coilovers, I need a new suspension system...

I got these installed on my infiniti fx but i hear clacking wen i goes over bumps. I havent lowered them or anything just put them on because im waiting for new rims. Can you tell me why the clacking sound?

@FiveFiveGarage

4 жыл бұрын

Did you adjust the spring preload before you installed them? If not, chances are the spring is bouncing on the seat because there is too much play. Check and re-tighten all locking collars and make sure they are tight against the lower cup. I had one loose and it made noise over bumps. Make sure to torque the suspension bolts under load and check and re-torque every nut and bolt you removed to install them. Also keep in mind, you just installed brand new stiff suspension parts and if the rest of your suspension is worn out (ball joints/bushings/end links especially) you are going to hear new noises because the new parts don't have the "give" like the parts you replaced. If you still hear the noise after you set preload and torque everything down, it might be time for a suspension refresh.

@DjPilon

4 жыл бұрын

Five Five Garage Thank you so much. No the mechanic did not set preload on springs. I will make sure is done then and stiffened when i add the new wheels and tires. Thank you i was worried. It sways from side when it hits bump. I thought the same thing that there is a lot of space for spring to be free and move.

I just ordered some this weekend for my NB from proimporttuners. Got a killer deal as well. How long did the shipment take?

@FiveFiveGarage

5 жыл бұрын

I remember getting them within a week. Pro Import Tuners is where I ordered mine too!

Thanks, I found it to be very informative. After the installation, can you adjust the ride height and stiffness without taking the wheels off?

@FiveFiveGarage

Жыл бұрын

Stiffness yes. Ride height you will have some trouble with the wheels on, not enough room to use the wrenches properly.

i was looking to get the megan EZII coilovers from Pro import tuners but it looks like the cover image for the coilovers looks like the ez1? the title says its the ez 2. can you help me clarify if these were the ones you had purchased please! love the vids!

@FiveFiveGarage

5 жыл бұрын

I have the 2's. I had that same problem!

I was looking to get these for a MS3, as they seem like they are not bad quality , and a great price. Curios about longevity =) .

@FiveFiveGarage

6 жыл бұрын

They have been on the car a few months now (my video backlog is horrendous) and I am pleased with them. If you are looking for MS3 suspension I *might* have something in the works.

@Chad_D

6 жыл бұрын

Sounds good =) ty for the update. I would like something a little more robust then the Megan's for the MS3 but I am sure they are perfect for a mx5. Ill stay tuned for what you have in the works !

I got the same gloves my brother! I’m trying to possibly install these in my 04 gto. Can’t decide on these or a standard strut/shock/spring combo. Seems like coils offer so much more for less $$

@permabulk1454

Жыл бұрын

I’m terms of the Megans. Pedders and others are way more $$$

How low did it go and did you max it out?? I have lowering springs at the moment and want to go lower

@FiveFiveGarage

5 жыл бұрын

I didn't max it out, I am around 2" from the pinch welds to the ground. It could go lower, but all of my bushings are shot, so it is a shimmying mess. Going to (hopefully) strip it to the subframes and replace everything this year. I probably won't slam it, it is murder to the PPF and frame rails.

How to adjust the dampening on the rear coilovers? I have them on my NC Miata and when i bought it it already came with them. I adjusted the fronts but idk about the rears

@FiveFiveGarage

5 жыл бұрын

Open the trunk and look for where the rear shock hats are (where the rear suspension bolts in). There should be a knob there, if not then there should be a knurled shaft sticking up out the rear shock hat. That is where the dampening is adjusted. You may have to remove a trim panel in the trunk to be able to see them.

@josecastro2332

5 жыл бұрын

@@FiveFiveGarage thanks i found them but the left one does not turn tho. All 3 others do turn

I think I'm gonna get them for my ls400. Just don't know how much comfort they have or they very stiff?

@FiveFiveGarage

4 жыл бұрын

If you are coming from stock, they will be noticably stiffer. If you stay near stock ride height, the ride quality is very good, if you are trying to slam it to the ground the ride will be harsh, but that is with any coilover. I am currently about 1.5" lower than stock and it feels 👍

Good video, do you recommend these & how are they holding up

@FiveFiveGarage

5 жыл бұрын

Still holding up. Soaking up the bumps well and no pogo stick feeling. My suspension bushings are garbage, there is a lot of play and flex in them, as they are the original OEM and over 20 yrs old. Once I replace those, I think the coilovers will work even better!

@AZTECPRIDELOCOS

4 жыл бұрын

Five Five Garage do you recomend for a camry 2018 will i have the same issues that you have?

@FiveFiveGarage

4 жыл бұрын

You should haven't any of the issues I am dealing with. My bushings are 14 years old, never been replaced, and are completely worn. With a 2018 your bushings are in good shape.

Can you keep stock height with these?

@FiveFiveGarage

5 жыл бұрын

It should be close, I first measured the stock suspension and then changed the Megan setup to match it when I installed. If your car is a NA6 (mine is a NA8) the difference in the shock hat design is going to lower the front of the car.

How good are they holding after 1 year? Are you satisfied? Any cons or issues?

@FiveFiveGarage

4 жыл бұрын

Still good, no issues! Very satisfied with them, not satisfied with my suspension bushings, I am going to replace the bushings this year and that should help the coilovers work even better!

I'm installing my megan racing coils tomorrow for an rx8. You believe the installation will be different to the miata?

@FiveFiveGarage

4 жыл бұрын

There should be some simularities. I doubt you will have to do the long bolt method, from what I have seen doing the suspension on the RX-8 should be easier. Let me know how it goes, I am thinking of adding an RX-8 to my garage!

about to buy these for my ‘99 acura TL any updates since installing them?

@FiveFiveGarage

2 жыл бұрын

If you make sure to keep them cleaned and put some oil on the threads they hold up great! There is a pic of them on my Instagram from last summer and they look as good as the day I put them on. But keeping them clean is the key.

Why aren’t camber plates used on the EZII coils?

@FiveFiveGarage

3 жыл бұрын

Camber plates work on suspension that use struts, like my Mazdaspeed 3. By moving the top of the strut in or out you can change the camber, because the strut plays a part in the location of the upper suspension relative to the vehicle. Coilovers for strut suspended cars need camber plates, especially when you lower them as it is the only way to adjust camber. Miatas on the other hand, have a double wishbone suspension (upper and lower a-arms) that handles the location of the suspension and the camber and caster can be adjusted by eccentric bolts in the lower a-arms. Camber plates won't do anything on this type of suspension because moving the top of the shock has no impact on the camber. The upper a-arm holds things in place, adjusting the eccentrics moves the lower a-arm in and out and that adjusts the camber.

What's the ride comfort like? And what's the dampening feel max hard vs max soft?

@FiveFiveGarage

5 жыл бұрын

My bad dude, I replied to the wrong comment LOL! The Megans ride well, compared to the original stock suspension (which was the original and the car has 156K on it), it was a definite improvement. I am sitting about 1.5 inches lower than stock and for the most part the car rides well. You will not mistake these for stock, they ride like a coilover, it will soak up small bumps, big ones you know you hit, notably they do rebound quick, most of the time I feel the single bounce on compression and that is it. My tires are some old Michelins that need replacement, I am sure with better tires (with a bit more sidewall) the ride would be better. Max hard to max soft, there is a difference, I wouldn't recommend daily driving them set to max hard, the ride is very harsh, to the point of being skittish over uneven surfaces (this could also be down to the tires being crap), when I autox this car I will probably dial up the dampening as it does seem to make the car feel more responsive. Max soft is too soft for me, I didn't get the same kind of steering responsiveness and wheel inputs felt sluggish. Right now I think I am 5 or 6 clicks from max soft front and rear. I can say that the ride has improved, but I really need to replace my bushings all around to really tighten up the car! (sorry for the earlier response, I thought it was for another video!)

@FiveFiveGarage

4 жыл бұрын

If you are looking for a softer ride, I would look into adjustable struts are available for your car first. These would keep the stock suspension lengths and allow the use of your stock springs, but have the ability to change the dampening to soften up the ride. Coil overs typically are shorter shock stroke than the stock struts, while they are adjustable, they will not ride as soft as the OEM's.

@swervv2957

3 жыл бұрын

Five Five Garage damn that comment helped me out! Good looking

I had to subscribe at about the 1:50 min mark....lol

Hey randy do the Megan shock Also raise up more than the stock ones

@FiveFiveGarage

5 жыл бұрын

Are you looking to go taller? I noticed when I originally installed them, the car was higher than stock. They adjustment range should get your higher than stock. How high are you looking to go? If you are looking to make something like a Rally Miata, you might want to look at other coilovers. If you want I can offer up some suggestions.

@RichardSmith-ic1zw

5 жыл бұрын

Five Five Garage yes I'm doing my car a rally car I already put the tires mudflaps And a air intake now I need the shocks but I can't find them I would like to raise 2 inches in the front and 5 inches in the back I have a 2015 Nissan Versa sedan

@FiveFiveGarage

5 жыл бұрын

Check out 172suspension.com, RaceWorks makes a set of coilovers called the Overland, that might be what you are looking for. I run their 172S on my Mazdaspeed 3 and I am really happy with them.

@RichardSmith-ic1zw

5 жыл бұрын

Five Five Garage thanks

@Saisei87

4 жыл бұрын

@@RichardSmith-ic1zw ok, so the first thing you're gonna want to do is get rid of your 2015 nissan versa and get something else 🤣🤣🤣

One year later, How do the struts feel? still a good ride or are the struts on their way out? Just ordered these and wondering how long they will hold up

@FiveFiveGarage

4 жыл бұрын

Still holding up. Drove the Miata over the weekend and the coilovers still feel great. I really need to replace all the suspension bushings, once those are refreshed I bet the coilovers will feel even better.

Right on I got some one the way how u liking them?

@FiveFiveGarage

4 жыл бұрын

Really pleased with them. They should work even better once I get new suspension bushings.

@Onelovej

4 жыл бұрын

Five Five Garage right on I just have a hard time deciding between Megan ez ll and tien flex z? Thanks for that knowledge u be dropping

@swervv2957

3 жыл бұрын

Dank knowledge💫🙏🔥💨 that’s my problem. What you end up going with

i love the dad joke intro 😂😂

@FiveFiveGarage

2 жыл бұрын

See! I knew there were people out there that liked them!! I should start doing them again!

Seems like you didnt really lower it at all

@FiveFiveGarage

5 жыл бұрын

It is actually lower, it takes a few days for the suspension to settle. I didn't want to slam it, suspension travel on the rear of a Miata is already short to begin with and scraping the PPF is some bad juju I didn't want to mess with 😄

How have these held up for you, these three years?

@FiveFiveGarage

2 жыл бұрын

facebook.com/FiveFiveGarage/photos/a.261188211038089/1215509278939306/ That is a picture from October when I was cleaning out the garage. 3 years old and they are still like almost new. I kept the threads cleaned and lubricated so the adjustment collars spin freely. The NB came with BC Racing coils on it so the Megans have just been sitting since I sold the NA in August. I wouldn't hesitate to throw them on my NB if I needed to.

@kwbalance108

2 жыл бұрын

@@FiveFiveGarage Good stuff! Thanks!

MEGAAAAN haha its pronounced MEGEN tho haha

Meegan XD

Do Honda Fit stuff.

@FiveFiveGarage

Жыл бұрын

I actually was looking to buy a Honda Fit! I wanted a fun NA daily. All my cars have turbos now... 😆

Bro why are you so close to the camera i can see pimples... Great camera tho haha

@FiveFiveGarage

2 жыл бұрын

LOL! I was trying a different lense