A super size haul of super tools. Lots of winners

Amazing stuff and the best is the no 7 fantastic thanks for sharing your time 🍺🍺👍👍

@tony1721

8 ай бұрын

It’s a cracker , don’t think I’ve got room for it 😂😂

You just about killed me when you threw the Stanley No7 on top of the axe head, please be careful Ant!🤣

@tony1721

8 ай бұрын

😂😂😂these are tools, designed and made by men, for treatment we would shudder at nowadays. It’s all cool, they are all good 😊

What an amazing haul! You got some amazing gems in that lot! The vise grips are genuine made in Dewitt Nebraska. The Disston saw with the heavy brass support is a trim saw that would often be used with a miter box to make fine precise cuts to wood trim. I too can not stand to see good stuff thrown out. If you think about the energy and effort that went into producing things, it feels almost criminal to waste it by throwing it in the trash!

Nice haul Ant! the Stanley No.7 was the standout for me. Its nice when a collection of tools that probably took someone a lifetime to collect gets passed on to where they will get will be refurb'd and cherished rather than dumped in landfill... looking forward to the next instalment! loz

@tony1721

8 ай бұрын

Thanks, it’s definitely a beauty , without a doubt . Yep, they were going to sling it all, but luckily we bumped into each other

Hi tony love your content buddy as always. Them yellow handled screwdriver im sure are german made but for the life of me carnt remember the name and them bsutiful scissors with the orange paint are either for cutting fabric or i think are decorators scissors try and find a name something on the lines of harris. All the best and some lovely bits of kit. 😊

@tony1721

6 күн бұрын

Thanks for the info , I think There are CK if my memory serves me right , not bad tools tbf. I’ve got a thing about scissors 🤣🤣🤣I love a good pair , thanks for the compliments it’s very much appreciated 😊

Holy Sh** Tony you got me drooling over that Stanley Bailey #7. Love those trammel points, the wood mallet, the slotted screws i needed a couple of those a while back couldn't find any! Great haul and good on you for helping them out. I'm gonna watch again later I know there was more stuff I liked in there. Thanks for taking the time to show what's in the bags.😁 Looking forward to the next one! 🍻

@tony1721

8 ай бұрын

I know that Bailey is a lovely piece, not sure what I’m gonna do with it tbf. Thanks for watching , part 2 coming soon 😊

Scribing thingy are Beam trammels used for large circles ( you can make longer beams ) - I made some as an apprentice nearly 40 years ago, never used them LOL get them out every few years and clean / oil

@tony1721

8 ай бұрын

I just looked em up on google , fascinating, I love a mystery tool, ☺️thanks fur watching , stay tuned for part 2

Wow that shield is intyeresting. I'd get that checked by experts for provenance.

@tony1721

Ай бұрын

I cleaned it up a bit and I’d read about it before, I’m 99% certain is a 1960’s fake as it wasn’t really produced as an award 🙂🙂thanks fur watching and commenting 😄😄

Hi Tony A great collection. I think the yellow screwdriver is possibly a GPO Screwdriver Instrument No2. most useful size. Cheers.

@tony1721

8 ай бұрын

Deffo got that look of a GPO issue , I’ll have to take the paint off it , thanks fir watching and commenting, keep a look out fur part 2😂😂

Great haul there Mate, the corkscrew is great but love that mallet! 🛠👍😊

@tony1721

8 ай бұрын

That is a strange mallet , but looks great , thanks for watching

You got some great finds there. I like the little hammer and actually all of it. The crest was cool. I think I have a plane like that one I got when my Brother in law passed away, it's a bygone and like yours it needs a good clean up. Great video .

@tony1721

8 ай бұрын

Thanks for watching, yep, done great stuff in there, deffo some projects to come, little hammer is a beaut☺️

A Stanley no. 7! Come on, they are like hens teeth in tool hauls. If you decide not to keep it, let me know.

@tony1721

8 ай бұрын

Hi, thanks for watching , yep, it’s deffo a rare beaut , I’ll probably have to let it go at some point , keep watching fir part 2, I’m not sure what’s in the rest of the bags etc ☺️☺️

Hiya mate , id have saved as much as possible too ! The mr punch is a issac sorby tool . ( later on became marples) nice haul !!

@tony1721

8 ай бұрын

Thanks for watching and thanks for the info, I’ll deffo look that up , keep watching fir part 2 😊

Chisel. The "Punch" series from Robert Sorby, Sheffield. scissors are paper Hangers' shears. Rabone white rules from late '60s. Brass scribes .are a set of Trammels. Number 7 is a jointer Plane and is valuable. Polish shield is an item of history and needs research.... Bob (Weston super Mare)

@tony1721

8 ай бұрын

Very interesting chisel, I think now I’ve got one somewhere lol. The shield is a reproduction , I know my third reach stuff, it was initiated as an award , and approved but none were ever awarded

@tony1721

8 ай бұрын

Thanks for watching and taking time to comment, it’s appreciated

Think the small yellow screwdriver is a Footprint no 2, possibly GPO issue Richard

@tony1721

8 ай бұрын

Deffo Looks that way, I agree, I’ll try to remove the paint first the next video 😀

It would be interesting to learn what that shield was all about. tHanks for the video

@tony1721

8 ай бұрын

I sort of already knew, I’ve been reading about Germany from 1918-1945 since I was a kid, it’s a shield that was never produced although it was authorised as an award. That is a very early reproduction from the first designs 😊

@Dancing_Alone_wRentals

8 ай бұрын

Interesting @@tony1721 When I was a kid I thought of war as a complete break down of everything. Everyone in the woods and cold. Later on what fascinated me was the occupied countries would still have a baker, a butcher, a shoe maker...on and on. They continued to work. That shield would of been produced for Warsaw I'm guessing. I believe the Germans were soon to lose Warsaw in 1944. Who ever was making the shields was probably unaware. (rather could of been unaware).

The chisel with Mr Punch on it is( I Sorby )

@tony1721

8 ай бұрын

Definitely, it becomes clear 😜😜, thanks for your interest 😊and the info

Everyone going crazy about the Stanley.....what about the hand saw? Just curious if its more modern or older.......might be nothing but i do know people do seem to be into certain hand saws......

@tony1721

8 ай бұрын

I’ll deffo check it out a bit more, I’m limited knowledge whys on saws though tbf 😊

Fantastic tone great good to see all those tools continue by the way just put a film as demanded by you of the taps and die 👍👍🔩🔩

@tony1721

8 ай бұрын

Thanks, I’ll deffo be watching that in a bit .. I need to pop up 😊

@Reggyontheroad

8 ай бұрын

Ar you free tomorrow I am working Friday

@tony1721

8 ай бұрын

@@Reggyontheroad more off next week tbf, only working Monday , off to Gran Canaria Friday