Patrick keep on keep`in on. Love the sound of that JD.
@PatrickShivers
Жыл бұрын
Thanks Chris.
@joshuawmontgomeryusmc Жыл бұрын
Man you have making that 8530 work for its place on the farm. You have my two favorite tractors, the 4960 and 8530. Two of the best ever.
@PatrickShivers
Жыл бұрын
& a 4430……3 of the best ever made
@kenhurley4441
Жыл бұрын
@@PatrickShivers I'm so old I've driven an "R".
@jaredvanbergen7904 Жыл бұрын
Just love hearing that 8530 putting in work... Sounds great!
@PatrickShivers
Жыл бұрын
Definitely sounds better than the regin R series tractors.
@wry569 Жыл бұрын
Just found your channel and subscribed. Like your style and like how yo 8530 sounds. Can almost smell that fresh dirt.
@PatrickShivers
Жыл бұрын
Thanks for watching/commenting/subscribing Marc!
@luisnunes7933 Жыл бұрын
Hello, Patrick! That's real ripping...
@PatrickShivers
Жыл бұрын
Thanks for watching Luis!
@luisnunes7933
Жыл бұрын
@@PatrickShivers 👌
@nathanscott7910 Жыл бұрын
Man that tractor looks like an eight wheel race car.
@PatrickShivers
Жыл бұрын
Far and away my favorite body design JD ever made. The first time I sat in one of these and looked down the hood (around 2005) I remember thinking it looked just like a hot rod. This one is a 2008 model.
@clarkwheeler8764 Жыл бұрын
Your Pecan trees budding is a good planting forecaster. I'm up here in western Kentucky I use my Ginseng plant. When it starts to come up I know the frosts are over. I've only seen it get fooled one time in 20 years.
@lawnman1226 Жыл бұрын
Just found your channel great job! I own a small weed control & fertilizer company . Always found farming very interesting.
@PatrickShivers
Жыл бұрын
Turf management is farming. Some farmers grow food, some grow fiber (cotton, trees, etc), and some grow landscapes. Keep up the good work and thanks for watching.
@timmywade1313 Жыл бұрын
My sub moisture plow has 1 shank it goes rite@ 22 inches deep . Had it on a 4020 with loaded tires it spun out in field corner close to woods
@colefletcher-ox7xd Жыл бұрын
I'm looking forward to see some planting footage
@PatrickShivers
Жыл бұрын
Won’t have to wait long.
@redclayfarmer7992 Жыл бұрын
Great footage!
@PatrickShivers
Жыл бұрын
Thanks Redclay Farmer! Where do you farm at?
@redclayfarmer7992
Жыл бұрын
@@PatrickShivers northeast ga ..Greene Co. What about yourself?
@PatrickShivers
Жыл бұрын
@@redclayfarmer7992 Clay County. Southwest Ga….aka God’s Country
@redclayfarmer7992
Жыл бұрын
@@PatrickShivers I know exactly where you’re at ..I have some friends in Calhoun Co and Albany.
@remmiefamtv9509 Жыл бұрын
Hey Patrick . Been watching for a while now. Never seen a produce farm of this size before. Must take a lot of work. I have a 2 acre garden and it keeps me busy
@PatrickShivers
Жыл бұрын
Most of the big tractor/implement videos are of the row crop side (peanuts, corn, soybeans, cotton, wheat, grain sorghum). I use the big stuff to do land prep on the produce also (peas, green beans, butterbeans, potatoes), but the acreage is way less.
@GANNONGOLSON Жыл бұрын
Royal brass and hose
@ManuelTorres-zt7rp Жыл бұрын
Simplemente fantástico
@jeremyraeber4234 Жыл бұрын
I don't know it looked like you were only running 23.86 inches deep lmao. Love your videos
@PatrickShivers
Жыл бұрын
🤣Good eye, I knew someone would bust me! Thanks for watching & commenting man!
@tomcarlisle2459 Жыл бұрын
Drove a white 2-105 for many years. Best tractor on the farm
@PatrickShivers
Жыл бұрын
Did it have the 3208 Cat engine?
@tomcarlisle2459
Жыл бұрын
It had a Perkins engine If I remember correctly
@PatrickShivers
Жыл бұрын
@@tomcarlisle2459 some of them have Perkins 6 cylinders and some models have CAT 3208. Both are super reliable, but that 3208 is a fav of mine.
@johngreer3004 Жыл бұрын
I love to hear that thang beller! Lol
@PatrickShivers
Жыл бұрын
It’s got a distinctive sound. Sounds like a real man when compared to R series.
@johngreer3004
Жыл бұрын
@@PatrickShivers I agree. I run a 370r a lot and it doesn't sound as good at all. I grew up on a open cab4430 and always loved the way it sounded.
@johngreer3004
Жыл бұрын
Does your 8335 pull as good as the 8530?
@PatrickShivers
Жыл бұрын
@@johngreer3004 they are comparable as far as what they can do. The R tractors just require a lot more attention to keep them operating. The muffler has to removed periodically, taken to a specialist and burned out. Multiple sensors disable the tractor and have to be replaced each year. Turbo issues. Unknown/unfindable “loose wire” issues. We’ve had 9 or 10 R tractors and the story has been the same on everyone of them
@PatrickShivers
Жыл бұрын
@@johngreer3004 open cab 4430 is on my top 5 all time JD tractor list. I have a few videos with ours in it. It’s a power shift with clamp on duals. Absolute beast.
@Jan-Boer Жыл бұрын
Thanks for the video. In many areas in the USA they have severe frosts that restore the structure of the soil. Surely you don't have enough frost there? Here in the Netherlands we like to loosen the soil deeply in the autumn to get rid of the water in the winter. And won't the soil dry out too much by doing this in the spring?
@PatrickShivers
Жыл бұрын
Our ground does not freeze. Heavy rains compact clay soils. They have to be plowed as close to planting time as possible. We do subsoil the low bottoms in late fall to prevent them from becoming ponds and holding the winter rain water until mid summer.
@midnightrider2342 Жыл бұрын
It's SO DEEP Papi
@derrickbeard2553 Жыл бұрын
Hail Southern!
@PatrickShivers
Жыл бұрын
GATA! What any of my other videos and you’ll see me representing. I was there during the Adrian Peterson era and a few years after. Back in them days Paul Johnson stomped mud holes on every team that came to Our House.
@derrickbeard2553
Жыл бұрын
I was there for Erk Russell and Tim Stowers Class of 93 ! I remember AP though ! Had some great times in the Boro !
@PatrickShivers
Жыл бұрын
@@derrickbeard2553 I use to see Erk every now and then eating at the Irish pub next to the practice field. A true Legend.
@justlooking2013 Жыл бұрын
Man I love that 85, this like tractor porn 😂.
@PatrickShivers
Жыл бұрын
🤣i think you just came up with a new hashtag
@williamcorleu5839 Жыл бұрын
I love my tractor 8530
@PatrickShivers
Жыл бұрын
They are great
@im1469 Жыл бұрын
We used to rip about 30” deep ahead of a crop of potatoes. Some of the other farmers around here asked us why we went so slow pulling the ripper. 🤣
@PatrickShivers
Жыл бұрын
That’s MEGA deep! What were you using to pull it that deep?
@byronglover7998 Жыл бұрын
Growing up,we have a neighbor who ran a White 2-175. I,too, have never seen a White cap.
@PatrickShivers
Жыл бұрын
I’ve heard some of those Whites had CAT 3208 diesels…..the most reliable engine ever built.
@byronglover7998
Жыл бұрын
@@PatrickShivers yes sir it did have a 3208
@truthandfreedom885 Жыл бұрын
Your lucky you don't have rocks, I couldn't get from one end of the field to the other without breaking every shear bolt. Will you plant the seed directly over where the shank went? I didn't notice if you had autosteer RTK or not.
@PatrickShivers
Жыл бұрын
Subsoiling is done at slight angle to how rows will run. A field cultivator runs just in front of the planter. I explain that in the corn planting video I posted yesterday
@brianhansen826 Жыл бұрын
We call the big clay boulders dinosaur turds 😂😂
@PatrickShivers
Жыл бұрын
I haven’t heard that one before
@colinarnold1248 Жыл бұрын
How many acres are you working up, and how long do you expect it to take to work up
@PatrickShivers
Жыл бұрын
In this video I am ripping 160 acre corn field. It took about 11 hours. I’ll run the field cultivator right ahead of planter as soon as temperature gets right. It will take less time as it will be traveling faster and is a little wider.
@kenclaytor5690 Жыл бұрын
I like the WFE hat, I have a 1850 Oliver, does that count? 😂
@PatrickShivers
Жыл бұрын
The online store I purchased this hat from also had Oliver and Alis-Chalmers hats. I’ve never owned an Oliver, they to are exceedingly rare around here.
@fishfoolishness4222 Жыл бұрын
How long will those new tires last pulling something like that?
@PatrickShivers
Жыл бұрын
If you stay off the pavement & don’t run over deer antler sheds they last a long time.
@peanutsmith1462 Жыл бұрын
Nothing sounds like a 8530 or 8410 my favorite tractors has it burned any oil yet
@PatrickShivers
Жыл бұрын
The seller (in Kansas) said it needed a head gasket per his John Deere mechanic. When we took delivery (in the fall) we had the local JD rebuild it. That said it still has the break-in oil in it, which is designed to burn towards the end of break-in period. It is still in the “safe” zone but has started creeping down the stick just a little.
@peanutsmith1462
Жыл бұрын
@@PatrickShivers do you have the tires water down
@PatrickShivers
Жыл бұрын
@@peanutsmith1462 no, b/c it has 1,450 pounds of added weight (besides the huge inner wheel weight) per side on the rear wheels. The duals are also made of thicker metal than standard duals to allow for all that weight. Evidently in the parts of the country where it’s to cold to put water in the tires they get thicker wheels and add more weights
@timmywade1313 Жыл бұрын
How many inches per plow 20? 22?. Our 1086 handled 6 bottom 18 inch plows
@PatrickShivers
Жыл бұрын
I believe all JD switch plows have 20” bottoms. I have a video from this time last year of 4755 pulling a 5 bottom JD plow. We’ve never had a Case tractor, but I’ve heard the 1086 was a beast in it’s day.
@williamgreenway9893 Жыл бұрын
Was they as good as they looked?😮
@PatrickShivers
Жыл бұрын
Was what as good as they looked? I thought I must have eaten smoked oysters in this video, but I checked and I didn’t 🤷🏼♂️
@eddiem79 Жыл бұрын
what is the cost of that implement ?
@PatrickShivers
Жыл бұрын
The manufacturer quit making this particular style ripper years ago. A used one similar to this at auction may go for $10,000-$20,000 depending on condition/size/options
@captainhic3 ай бұрын
New Hat, Who dis?
@PatrickShivers
3 ай бұрын
🤣
@williehampton6631 Жыл бұрын
What part of Alabama u are from my I ask
@PatrickShivers
Жыл бұрын
I’m in southwest Georgia aka God’s Country
@williehampton6631
Жыл бұрын
@@PatrickShivers on I'm in south Alabama
@PatrickShivers
Жыл бұрын
@@williehampton6631 east or west?
@williehampton6631
Жыл бұрын
@@PatrickShivers west
@PatrickShivers
Жыл бұрын
@@williehampton6631 a few of my pecan trees came from Foley, Al.
@danielsboro Жыл бұрын
We farmed near Statesboro ran a White 105 Field Boss for a few years
@PatrickShivers
Жыл бұрын
I use to scout cotton from Brooklet to Claxton when I was at Georgia Southern.
@PatrickShivers
Жыл бұрын
Did it have a 3208 Cat engine?
@danielsboro
Жыл бұрын
It was a Perkins 6 pulled hard smoked like a train.
@PatrickShivers
Жыл бұрын
@@danielsboro we use to run a lot of little perkins motors on generators for irrigations. Still got 2 Massey Fergusons (135 & 165) with them. They are really reliable little engines.
@stacydixon457 Жыл бұрын
Wish I was close to u I beg u to let me drive that 4960 my x boss had one I loved that tractor
@PatrickShivers
Жыл бұрын
One of the greatest tractors ever made
@stacydixon457
Жыл бұрын
@@PatrickShivers yes it was I miss driving the 4960 wish they bring them back
@PatrickShivers
Жыл бұрын
@@stacydixon457 bring them back greenstar ready. JD wouldn’t be able to keep production up with sales
@stacydixon457
Жыл бұрын
@@PatrickShivers that's for sure
@wadewalker6231 Жыл бұрын
Deep tillage..? What is that like 10"-12"...? L O L...
@pakoprince9364 Жыл бұрын
Tafe
@PatrickShivers
Жыл бұрын
Thanks for watching Pako
@williamcorleu5839 Жыл бұрын
You want me to come and run the 8530
@PatrickShivers
Жыл бұрын
😂
@StonedTristan Жыл бұрын
Desert land.
@PatrickShivers
Жыл бұрын
Not sure what you mean by desert land. Perhaps you are referring to the myth commonly spread by no-till enthusiasts that tilled dirt is dead dirt. There is no science behind those claims and they are easily refuted with even the most basic knowledge of agriculture/biology. The ground seen in this video is full of life as evident by the variety of live “weed” seeds that sprout throughout the year. Henbit, winter rye, and several other species spring up every winter without seeding. Texas panicum, coffee weed, buffalo grass, & morning glories spring up all throughout the warmer months without ever being seeded. Nematodes are also alive and well in the soil. Deep tillage helps combat them but never eliminates them. Not tilling results in nematode population explosions which of coarse severely damages/kills the crops we plant. There is still more microbial life in abundance in this soil as it is planted in peanuts every third year and I don’t have to inoculate them because the bacteria needed for them to fix nitrogen is already present in the soil. If I was killing the microbial life I would need to add inoculant to my peanut seed for them to grow properly….but I don’t inoculate this field and it is some of the finest peanut dirt in the country. KZread No-till enthusiast love to talk about worms in your dirt. That is of course an amazing display of ignorance as earth worms prefer saturated soils and row crops prefer well drained soils. Row crops (peanuts, cotton, soybeans, corn, grain sorghum, peas, green beans, Butterbeans, potatoes, onions, etc) and earthworms literally prefer opposite environments. If earth worms are thriving in your field then your crop yields are being diminished from poor drainage. Nothing but facts, science, and reality here.
@charlietanner6211 Жыл бұрын
that deere dont look like a tractorjust cause i made a remark about ol deere john no need to run me over got some missouri gumbo you would have a different story
@PatrickShivers
Жыл бұрын
The difference in workability of soils amazes me. I don’t have experience in Missouri gumbo, but I have visited some delta farms in Arkansas and Mississippi. They ran combines through standing water on their fields. If you get a combine within 100 yards of standing water in our red clay fields it will sink to the frame.
@nickjones6747 Жыл бұрын
Getting that fertilizer exactly where the plant needs it. 24in deep
@PatrickShivers
Жыл бұрын
Turning plows (aka moldboard or bottom plow) take soil from the bottom of plow depth and flip it with soil at the surface. This is a subsoiler. It doesn’t bring up dirt from the tip of the shank and transport dirt from surface to the bottom of the shank. The thin shanks slide through the ground loosening it throughout their length while the row of S tines behind them stir the top couple of inches of soil which is then leveled by the drag pipe. This can be seen in the clip where run over the GoPro. It gets rolled by the shank and then thinly covered by the S tine. All the fertilizer and GoPros remain in the top 2 inches…..exactly where we want it.
Пікірлер: 107
Patrick keep on keep`in on. Love the sound of that JD.
@PatrickShivers
Жыл бұрын
Thanks Chris.
Man you have making that 8530 work for its place on the farm. You have my two favorite tractors, the 4960 and 8530. Two of the best ever.
@PatrickShivers
Жыл бұрын
& a 4430……3 of the best ever made
@kenhurley4441
Жыл бұрын
@@PatrickShivers I'm so old I've driven an "R".
Just love hearing that 8530 putting in work... Sounds great!
@PatrickShivers
Жыл бұрын
Definitely sounds better than the regin R series tractors.
Just found your channel and subscribed. Like your style and like how yo 8530 sounds. Can almost smell that fresh dirt.
@PatrickShivers
Жыл бұрын
Thanks for watching/commenting/subscribing Marc!
Hello, Patrick! That's real ripping...
@PatrickShivers
Жыл бұрын
Thanks for watching Luis!
@luisnunes7933
Жыл бұрын
@@PatrickShivers 👌
Man that tractor looks like an eight wheel race car.
@PatrickShivers
Жыл бұрын
Far and away my favorite body design JD ever made. The first time I sat in one of these and looked down the hood (around 2005) I remember thinking it looked just like a hot rod. This one is a 2008 model.
Your Pecan trees budding is a good planting forecaster. I'm up here in western Kentucky I use my Ginseng plant. When it starts to come up I know the frosts are over. I've only seen it get fooled one time in 20 years.
Just found your channel great job! I own a small weed control & fertilizer company . Always found farming very interesting.
@PatrickShivers
Жыл бұрын
Turf management is farming. Some farmers grow food, some grow fiber (cotton, trees, etc), and some grow landscapes. Keep up the good work and thanks for watching.
My sub moisture plow has 1 shank it goes rite@ 22 inches deep . Had it on a 4020 with loaded tires it spun out in field corner close to woods
I'm looking forward to see some planting footage
@PatrickShivers
Жыл бұрын
Won’t have to wait long.
Great footage!
@PatrickShivers
Жыл бұрын
Thanks Redclay Farmer! Where do you farm at?
@redclayfarmer7992
Жыл бұрын
@@PatrickShivers northeast ga ..Greene Co. What about yourself?
@PatrickShivers
Жыл бұрын
@@redclayfarmer7992 Clay County. Southwest Ga….aka God’s Country
@redclayfarmer7992
Жыл бұрын
@@PatrickShivers I know exactly where you’re at ..I have some friends in Calhoun Co and Albany.
Hey Patrick . Been watching for a while now. Never seen a produce farm of this size before. Must take a lot of work. I have a 2 acre garden and it keeps me busy
@PatrickShivers
Жыл бұрын
Most of the big tractor/implement videos are of the row crop side (peanuts, corn, soybeans, cotton, wheat, grain sorghum). I use the big stuff to do land prep on the produce also (peas, green beans, butterbeans, potatoes), but the acreage is way less.
Royal brass and hose
Simplemente fantástico
I don't know it looked like you were only running 23.86 inches deep lmao. Love your videos
@PatrickShivers
Жыл бұрын
🤣Good eye, I knew someone would bust me! Thanks for watching & commenting man!
Drove a white 2-105 for many years. Best tractor on the farm
@PatrickShivers
Жыл бұрын
Did it have the 3208 Cat engine?
@tomcarlisle2459
Жыл бұрын
It had a Perkins engine If I remember correctly
@PatrickShivers
Жыл бұрын
@@tomcarlisle2459 some of them have Perkins 6 cylinders and some models have CAT 3208. Both are super reliable, but that 3208 is a fav of mine.
I love to hear that thang beller! Lol
@PatrickShivers
Жыл бұрын
It’s got a distinctive sound. Sounds like a real man when compared to R series.
@johngreer3004
Жыл бұрын
@@PatrickShivers I agree. I run a 370r a lot and it doesn't sound as good at all. I grew up on a open cab4430 and always loved the way it sounded.
@johngreer3004
Жыл бұрын
Does your 8335 pull as good as the 8530?
@PatrickShivers
Жыл бұрын
@@johngreer3004 they are comparable as far as what they can do. The R tractors just require a lot more attention to keep them operating. The muffler has to removed periodically, taken to a specialist and burned out. Multiple sensors disable the tractor and have to be replaced each year. Turbo issues. Unknown/unfindable “loose wire” issues. We’ve had 9 or 10 R tractors and the story has been the same on everyone of them
@PatrickShivers
Жыл бұрын
@@johngreer3004 open cab 4430 is on my top 5 all time JD tractor list. I have a few videos with ours in it. It’s a power shift with clamp on duals. Absolute beast.
Thanks for the video. In many areas in the USA they have severe frosts that restore the structure of the soil. Surely you don't have enough frost there? Here in the Netherlands we like to loosen the soil deeply in the autumn to get rid of the water in the winter. And won't the soil dry out too much by doing this in the spring?
@PatrickShivers
Жыл бұрын
Our ground does not freeze. Heavy rains compact clay soils. They have to be plowed as close to planting time as possible. We do subsoil the low bottoms in late fall to prevent them from becoming ponds and holding the winter rain water until mid summer.
It's SO DEEP Papi
Hail Southern!
@PatrickShivers
Жыл бұрын
GATA! What any of my other videos and you’ll see me representing. I was there during the Adrian Peterson era and a few years after. Back in them days Paul Johnson stomped mud holes on every team that came to Our House.
@derrickbeard2553
Жыл бұрын
I was there for Erk Russell and Tim Stowers Class of 93 ! I remember AP though ! Had some great times in the Boro !
@PatrickShivers
Жыл бұрын
@@derrickbeard2553 I use to see Erk every now and then eating at the Irish pub next to the practice field. A true Legend.
Man I love that 85, this like tractor porn 😂.
@PatrickShivers
Жыл бұрын
🤣i think you just came up with a new hashtag
I love my tractor 8530
@PatrickShivers
Жыл бұрын
They are great
We used to rip about 30” deep ahead of a crop of potatoes. Some of the other farmers around here asked us why we went so slow pulling the ripper. 🤣
@PatrickShivers
Жыл бұрын
That’s MEGA deep! What were you using to pull it that deep?
Growing up,we have a neighbor who ran a White 2-175. I,too, have never seen a White cap.
@PatrickShivers
Жыл бұрын
I’ve heard some of those Whites had CAT 3208 diesels…..the most reliable engine ever built.
@byronglover7998
Жыл бұрын
@@PatrickShivers yes sir it did have a 3208
Your lucky you don't have rocks, I couldn't get from one end of the field to the other without breaking every shear bolt. Will you plant the seed directly over where the shank went? I didn't notice if you had autosteer RTK or not.
@PatrickShivers
Жыл бұрын
Subsoiling is done at slight angle to how rows will run. A field cultivator runs just in front of the planter. I explain that in the corn planting video I posted yesterday
We call the big clay boulders dinosaur turds 😂😂
@PatrickShivers
Жыл бұрын
I haven’t heard that one before
How many acres are you working up, and how long do you expect it to take to work up
@PatrickShivers
Жыл бұрын
In this video I am ripping 160 acre corn field. It took about 11 hours. I’ll run the field cultivator right ahead of planter as soon as temperature gets right. It will take less time as it will be traveling faster and is a little wider.
I like the WFE hat, I have a 1850 Oliver, does that count? 😂
@PatrickShivers
Жыл бұрын
The online store I purchased this hat from also had Oliver and Alis-Chalmers hats. I’ve never owned an Oliver, they to are exceedingly rare around here.
How long will those new tires last pulling something like that?
@PatrickShivers
Жыл бұрын
If you stay off the pavement & don’t run over deer antler sheds they last a long time.
Nothing sounds like a 8530 or 8410 my favorite tractors has it burned any oil yet
@PatrickShivers
Жыл бұрын
The seller (in Kansas) said it needed a head gasket per his John Deere mechanic. When we took delivery (in the fall) we had the local JD rebuild it. That said it still has the break-in oil in it, which is designed to burn towards the end of break-in period. It is still in the “safe” zone but has started creeping down the stick just a little.
@peanutsmith1462
Жыл бұрын
@@PatrickShivers do you have the tires water down
@PatrickShivers
Жыл бұрын
@@peanutsmith1462 no, b/c it has 1,450 pounds of added weight (besides the huge inner wheel weight) per side on the rear wheels. The duals are also made of thicker metal than standard duals to allow for all that weight. Evidently in the parts of the country where it’s to cold to put water in the tires they get thicker wheels and add more weights
How many inches per plow 20? 22?. Our 1086 handled 6 bottom 18 inch plows
@PatrickShivers
Жыл бұрын
I believe all JD switch plows have 20” bottoms. I have a video from this time last year of 4755 pulling a 5 bottom JD plow. We’ve never had a Case tractor, but I’ve heard the 1086 was a beast in it’s day.
Was they as good as they looked?😮
@PatrickShivers
Жыл бұрын
Was what as good as they looked? I thought I must have eaten smoked oysters in this video, but I checked and I didn’t 🤷🏼♂️
what is the cost of that implement ?
@PatrickShivers
Жыл бұрын
The manufacturer quit making this particular style ripper years ago. A used one similar to this at auction may go for $10,000-$20,000 depending on condition/size/options
New Hat, Who dis?
@PatrickShivers
3 ай бұрын
🤣
What part of Alabama u are from my I ask
@PatrickShivers
Жыл бұрын
I’m in southwest Georgia aka God’s Country
@williehampton6631
Жыл бұрын
@@PatrickShivers on I'm in south Alabama
@PatrickShivers
Жыл бұрын
@@williehampton6631 east or west?
@williehampton6631
Жыл бұрын
@@PatrickShivers west
@PatrickShivers
Жыл бұрын
@@williehampton6631 a few of my pecan trees came from Foley, Al.
We farmed near Statesboro ran a White 105 Field Boss for a few years
@PatrickShivers
Жыл бұрын
I use to scout cotton from Brooklet to Claxton when I was at Georgia Southern.
@PatrickShivers
Жыл бұрын
Did it have a 3208 Cat engine?
@danielsboro
Жыл бұрын
It was a Perkins 6 pulled hard smoked like a train.
@PatrickShivers
Жыл бұрын
@@danielsboro we use to run a lot of little perkins motors on generators for irrigations. Still got 2 Massey Fergusons (135 & 165) with them. They are really reliable little engines.
Wish I was close to u I beg u to let me drive that 4960 my x boss had one I loved that tractor
@PatrickShivers
Жыл бұрын
One of the greatest tractors ever made
@stacydixon457
Жыл бұрын
@@PatrickShivers yes it was I miss driving the 4960 wish they bring them back
@PatrickShivers
Жыл бұрын
@@stacydixon457 bring them back greenstar ready. JD wouldn’t be able to keep production up with sales
@stacydixon457
Жыл бұрын
@@PatrickShivers that's for sure
Deep tillage..? What is that like 10"-12"...? L O L...
Tafe
@PatrickShivers
Жыл бұрын
Thanks for watching Pako
You want me to come and run the 8530
@PatrickShivers
Жыл бұрын
😂
Desert land.
@PatrickShivers
Жыл бұрын
Not sure what you mean by desert land. Perhaps you are referring to the myth commonly spread by no-till enthusiasts that tilled dirt is dead dirt. There is no science behind those claims and they are easily refuted with even the most basic knowledge of agriculture/biology. The ground seen in this video is full of life as evident by the variety of live “weed” seeds that sprout throughout the year. Henbit, winter rye, and several other species spring up every winter without seeding. Texas panicum, coffee weed, buffalo grass, & morning glories spring up all throughout the warmer months without ever being seeded. Nematodes are also alive and well in the soil. Deep tillage helps combat them but never eliminates them. Not tilling results in nematode population explosions which of coarse severely damages/kills the crops we plant. There is still more microbial life in abundance in this soil as it is planted in peanuts every third year and I don’t have to inoculate them because the bacteria needed for them to fix nitrogen is already present in the soil. If I was killing the microbial life I would need to add inoculant to my peanut seed for them to grow properly….but I don’t inoculate this field and it is some of the finest peanut dirt in the country. KZread No-till enthusiast love to talk about worms in your dirt. That is of course an amazing display of ignorance as earth worms prefer saturated soils and row crops prefer well drained soils. Row crops (peanuts, cotton, soybeans, corn, grain sorghum, peas, green beans, Butterbeans, potatoes, onions, etc) and earthworms literally prefer opposite environments. If earth worms are thriving in your field then your crop yields are being diminished from poor drainage. Nothing but facts, science, and reality here.
that deere dont look like a tractorjust cause i made a remark about ol deere john no need to run me over got some missouri gumbo you would have a different story
@PatrickShivers
Жыл бұрын
The difference in workability of soils amazes me. I don’t have experience in Missouri gumbo, but I have visited some delta farms in Arkansas and Mississippi. They ran combines through standing water on their fields. If you get a combine within 100 yards of standing water in our red clay fields it will sink to the frame.
Getting that fertilizer exactly where the plant needs it. 24in deep
@PatrickShivers
Жыл бұрын
Turning plows (aka moldboard or bottom plow) take soil from the bottom of plow depth and flip it with soil at the surface. This is a subsoiler. It doesn’t bring up dirt from the tip of the shank and transport dirt from surface to the bottom of the shank. The thin shanks slide through the ground loosening it throughout their length while the row of S tines behind them stir the top couple of inches of soil which is then leveled by the drag pipe. This can be seen in the clip where run over the GoPro. It gets rolled by the shank and then thinly covered by the S tine. All the fertilizer and GoPros remain in the top 2 inches…..exactly where we want it.