Man, when you described the issues with the air filters breaking down, the particles getting into the carbs., damage to the carb. jets, the condition of the bike dying out at idle speed, all mirror my 2002 Intruder vs1400 glp to the last detail! I purchased this bike about 6 weeks ago and within a week experienced hard start, wouldn't idle, one cylinder cutting in and out when accelerating. I put the bike in the shop and the following issues were found. Fuel pump was bad, air filters had decomposed and gotten nto both carbs. requiring a carb. rebuild. Replaced pilot and main jets on both carbs. Replaced spark plugs , flushed fuel system out and replaced fuel lines and filter, new air filters, oil change , replaced both front and rear tires with Dunlop, replaced battery, tuned and synced carbs with oversized jets. Fifteen hundred dollars later, the bike starts and idles perfectly soon as the starter button is hit. No choke needed at all..I have custom pipes on bike,, and with the new set of Dunlop tires, oversized carb. jets , this Intruder rides and performs great! The bike only has 6200 miles on it. I also find the handling of the bike to be top heavy and not well balanced starting and stopping. I attribute this to the v twin engine height? Overall, it's a solid v twin cruiser,! Be sure to use OEM air filters on this bike, and keep the maintenance up.

I had the same 96 Intruder in the same color. I have a garage full of Kawasaki's and KTM's, but I still miss that bike. It's the only cruiser I would buy again. My only complaint was the slight shaft drive effect when down shifting entering a corner. I would have liked dual front disks and the 97-later 5 speed.

Good video man,picking up 97 1400 in the morning..16000 miles😁some of the greatest ass in long beach will be on it too..harley who

i bought myself the same type bike. has vance and hines pipes. sounds nice.

V4 Motorcycles are awesome. I have a 84 Honda Sabre 700. the camshaft problem was more due to improper use. people letting it idle too much and riding in too high a gear causing too low rpms which caused again low oil. theres kits to fix the early Honda v45 and v65 engines. by the time the 90s magnas came out the cam problems were basically fixed. you can get a v4 in hondas interceptor line.

A couple of thoughts... The exhaust. Cobra and Jardine make a full system. Both sound near identical and will run about $400. No rejet will be needed either. You can even go with K&N drop in filters and the exhaust and not need to change the jets. Second is the tires. You didn't say what you want, but I ran Avons on my 1400 and were very pleased with them. Long life and sticky in all weather. You may also want to invest in Designer clutch springs. You will eventually notice a slip and when you do, don't waste your money on aftermarket springs.

@InvictvsNox

8 жыл бұрын

+Tiger Explorer 1200 Stay tuned! ;)

@splynk1

8 жыл бұрын

Vance & Hines Classic II, or Silvertails will be my choice both sound great, the latter have interchangeable tips wich is nice

@XS-ry6ig

7 жыл бұрын

You always need to rejet your carbs whenever you put on an aftermarket exhaust. That is the correct way to do a bike.

@peterhoward492

5 жыл бұрын

@@XS-ry6ig not always necessary. It depends on the altitude.

@BucketWheat

5 жыл бұрын

I have used Avon as well, and Very Pleased with them. BUT... I went up to the 200 x 15 on the rear! It DOES fit, but I found it easier to put on the bike UN-Inflated, and then inflate afterward. But it works great, and rides great... and LOOKS Great! And with the slightly taller diameter, it will give you better mileage. And I never noticed any loss of Acceleration. I also changed to Progressive rear shocks, about 3/4 shorter than stock... and that matched well with the larger tire... eliminated the 'gap' without the tire rubbing... But be Mindful if you are carrying riders or a load of gear for travel...

Wats the best after market pipes for a 1400 s8 looking for something loud and decent

You spoke about which tires you want that handle amazingly but you didn't say what brand of tires!! Could you please let us know which tires you had in mind? Thanks for the video!

The old Magnas from the 80's had the cam issue. The new, Gen 3 Magna 750 that was made from 1994 to I think 2002 essentially had a detuned VFR750 motor with no cam issues. They did tend to eat regular/rectifiers tho, but what Honda didn't in the 90's?

@InvictvsNox

6 жыл бұрын

Thanks for that. I know next to nothing about Honda except for how much I miss their creativity in making bikes.

I plan to replace the handle bar, similar to Honda, its wider, and add the dash board with wind shield. Of course replace the head light.

My VS800 has 5 gears but I'm jealous of your 4 gears because they're so tall... on my bike I have to shift every 10mph... and when I pull on the throttle, I only get 1 second of gas before I have to shift again (and repeat)!

@InvictvsNox

7 жыл бұрын

RosieMoto all depends on your riding style. Aggressive gearing works for me because I like to ring my bikes out. :)

did you ever consider virago 1100? smaller bike? or older Z1?looking at same bikes, V-Max & 1400..but as you mentioned VS1400 is a bargain

re upgrades - get engine bars with foot pegs to stretch out ; modulated headlight (alternates high/low beams), modulated / flashing brake light ; for trips a wind shield-it will rain ; tubeless wheels & tires ;

@danield831

5 жыл бұрын

flashing brake lights are huge for preventing being rear ended. However as far as I know you cannot use tubeless tires on wheels with spokes, a tube is required with the tire.

i got the 95 magna and i love it, but like you i wish it was a 1400cc that would be ideal

@InvictvsNox

8 жыл бұрын

Bet you anything yours still has more horsepower though, lol. They're killer bikes. I still want a VMax.

I would trade my forward controls for your factory ones.

I also changed my handlebars and the bike handles so much better. You can find my video on line . It is about 2:45 long. My bike is the same color as your bike. Just look for 1998 Suzuki Intruder VS 1400 and I think it will pop up . it is there somewhere. You can hear my pipes and see the new handlebars. It makes the bike look more badass. The Honda you are talking about is the Honda Magna V65. It is a V4 with 121hp. I almost bought one myself .

I sold my 91' Intruder 750 to raise cash to buy a truck . Then I traded my 86' Kawasaki Eliminator 600 for an 88' Intruder 1400 . It seems like the 1400 picks up where the 750 left off .

cobra pipes sound great, but are cheap quality. I would definitely opt for Vance and Hines any day over cobras from here on out. the cobras for 1400 were just too thin walled. tires... Avon, Michelin or pirelli. in that order :)

They came in 750 and 1100 from 83-86. Then only 750 in 87/88. And then again as a 750 from 94-03. The first two gens were shaft driven and the Gen3 was chain driven. BUT, having said that, even the smaller of the V4's spank the crap out of the VTwins for power. The other nice thing is the 750's were much lower than the 1100.

@InvictvsNox

8 жыл бұрын

+Matthew Williams Nice. I didn't know that, but I do know they're great HP-wise.

@MatthewWilliamsCFDEV

8 жыл бұрын

Indeed. Do It With Dan has a 90's model. I just got done putting mine back together (daggum fuel boogers clogged my high speed jets) and can't wait to give it another 0-60 test.

@splynk1

8 жыл бұрын

Had a 86 700 (V42) loved it, but wanted more powaaaaah :-) so changed to a 86 1100 (V65) loved the looks and the engine is lovely, came to hate the bike itself shortly after due to its high center of gravity,, Honda spoiled that bikes handling completly by rasing itsseat height by 8cm (engine is 6 cm higher) im 186 cm with long legs so no issues there i sat great on it, but now its out the door with a boot in its ass, going for the Intruder 1400 now :-)

I speed a LOT. lol We need to go for a ride soon. Let me know what your work shedual is looking like next week.

@InvictvsNox

8 жыл бұрын

+Gladius Jon 8-5 on the weekdays. :)

What's the flashing light ?

nice

What do you recommand? vs 800 or vs 1400 in terms of reliability and fuel consumption?

Yes cobra makes a complete system. I put them on my bike and the bike sounds awesome.

@InvictvsNox

7 жыл бұрын

XS1100 New bike, who dis?

@XS-ry6ig

7 жыл бұрын

When did you get the bike ? Your comment says new bike .

@XS-ry6ig

7 жыл бұрын

A person who owns the same bike but mine is a 1998, 5 speed. I go by XS1100 because I also own a 1981 Yamaha XS1100 special . I have a 30 second video on Utube. I have owned the bike since 2012 and on 6/24/2017 I put a set of MAC 4 into 1 pipes on the bike you can hear the bike if you look for 1981 Yamaha XS 1100 special.

@XS-ry6ig

7 жыл бұрын

My video is on page 24 . I believe it is the bike that is the 3rd video down. It is a brand new post . it has only been on line 1 day. So please look there if you want to see and hear my bike. Thank you . Please comment and let me know what you think . it is under XS1100

Great vid, waiting for a new ride/vid 😏

@InvictvsNox

8 жыл бұрын

Bless you, good sir. Currently waiting on a new bike and computer that won't die as soon as I ask it to edit video.

@rickarjandejong

8 жыл бұрын

+InvictvsNox Ah, computers... Always a pain when it's not suppost to ;-) But wait, a new bike? What happend to the magnificent VS1400?!

@InvictvsNox

8 жыл бұрын

+Rick de Jong I can't discuss it quite yet, but I promise explanations to come. :)

I just buy to day intruder vs 1400 1600 17000 miles I drove from where I buy it 1 hour and just feel so wonderful !! Iam glad I just got it ... what is the diferent intruder vs and just intruder ????

@InvictvsNox

4 жыл бұрын

Intruder are all VS. VS400 - VS1400

@Tacbi0325

4 жыл бұрын

Oh really??? I thought the intruder 1400 was diferent to intruder vs 1400 ... I drove for 1:45 minutes to day and feels very comfortable... I already have 07 boulevard c50 but I think intruder is more like light no to heavy as boulevard

Great video bro,have a94,1400...do u still have the bike? Tryna find out what tires you ended up on?...get ready to replace...brickstone,rear.michlin.front.

@InvictvsNox

2 жыл бұрын

Avon Cobras or Michelin commanders will never steer you wrong!

also your 4 speed produces more HP than my 5 speed :)

Did you ever do any customizing to this if so what? And was it worth it?

@InvictvsNox

6 жыл бұрын

Max Laufer-clapp I wish I had it long enough to but no, I didn't. :(

@maxlaufer-clapp4114

6 жыл бұрын

Dam I just picked one up it seems like a great ride...why'd you get rid of it?

Did you ever find my video of my 1400 intruder with the cobra pipes on them? The cobra pipes are a complete exhaust for around $380.00 and the sound is amazing.

@InvictvsNox

3 жыл бұрын

I believe you! If only I had a use for them now.

@XS-ry6ig

3 жыл бұрын

@@InvictvsNox Why did you sell the 1400 intruder? If you did you want to buy my 1981 Yamaha XS 1100 special. 4 into 1 MAC exhaust new tires rejet carbs. K&N air filters new handlebars new grips .

@InvictvsNox

3 жыл бұрын

@@XS-ry6ig Noooo, a van pulled out in front of me and we all went boom.

@XS-ry6ig

3 жыл бұрын

Well that sucks sorry to hear about that. I hope you're all right. I hope that did not make you stop riding. Hopefully you didn't get hurt at all. The 1400 intruder is a nice bike I have one myself I have the 98. I did a lot of modification to mine. Seriously dude I'm really sorry to hear about your bike that sucks

@XS-ry6ig

3 жыл бұрын

@@InvictvsNox sucks that happened to you

what tires dyou end up putting on it?

@InvictvsNox

7 жыл бұрын

I bought a set of Avon Cobras (because they discontinued the Venoms). I wish I could honestly recommend them, but the bike was totaled before I got the chance to put them on.

@travisflint7134

7 жыл бұрын

InvictvsNox dang, what happened?

@InvictvsNox

7 жыл бұрын

Travis Flint check out my more recent vids!

what's the max speed you have done with this bike?

@InvictvsNox

7 жыл бұрын

leogv90 hmm, this was a while ago. I don't think I ever got the chance to really push it, so I wanna say maybe 90?

@leogv90

7 жыл бұрын

+InvictvsNox Hey thanks for answering! I'm buying one of these soon and wanted to know the top speed it could get but there are not many videos on youtube.

@InvictvsNox

7 жыл бұрын

leogv90 I don't mean to discourage you, but if I learned anything about them with my short time with mine, it's that they aren't properly counterbalanced engines. Loads more torque than the 800, but it vibrates quite at bit at highway speed. You may find a big Honda twin or maybe another make to be better in that regard. Top speed should be higher than the 800, but the 800 will beat it in acceleration.

@marvinhelton4482

6 жыл бұрын

leogv90 I've been up to 130 mph

@mikegump8248

4 жыл бұрын

@@marvinhelton4482 was a it a smooth ride over 130? Or alot of vibration as he mentioned?

Get some Kuryakan footpegs with the the bike specific adapters. You notice a huge difference. Do not lower the bike it will not handle properly. You will be disappointed. The bike will not handle as well.

Use 4th below 70...it's the beauty of having 1360cc's!! You'll also get better mpg by not staying in 3rd most of the time.

@2002ZRX1200R

7 жыл бұрын

5th has them whirling @ 70, you're trying to get people to fuck up their rides...

Most of your complaints about the bike are because of your Handlebars. Please trust me I changed mine and it is not the same bike at all. it handles so much better. You will have to rejet the bike if you do put a new exhaust on the bike. If you can also put in some K&N air filters .

@DorranceALong

5 жыл бұрын

Yep, the stock handlebars make the 1400 a bear in town riding. I changed to a bit wider bar and it was much better.

1:49 Toyota Corolla SR-5 wagon.

@InvictvsNox

7 жыл бұрын

I have very poor eyesight. lol

@techmaven5900

7 жыл бұрын

InvictvsNox I can see why you thought Subaru..That particular model Toyota was the closest thing to a Subaru...that wasn't a Subaru..lol!

They simply sound awful tho, sound like a raspberry rolling around a tin can, they are way too quiet. Changing the pipes on mine was an absolute nightmare, the air intake needed to be resized, it needed a re-jet, I've never spent so long tuning a motorcycle and every now and then it still seems to run a little rich. the wiring is also a rats nest and was also a nightmare. If you like to mod these bikes are not fun to play with. Something I wish I new before buying.

Top speed?

@InvictvsNox

6 жыл бұрын

0mph nowadays...

@griffenatekevinbacon

6 жыл бұрын

InvictvsNox whats the fastest you did on the bike lmao

Once my tax return comes through, I'm buying a 97 vs1400 from my buddy. I intend to put 2" cobras on it, k&n intakes, rejet it, put a bigger gas tank on it, throw saddle bags on it, might put some mini apes on it and change the tires and suspension. Also might throw 1500 heads on it. Did you change the tires and suspension? If so what did you go too?

Please...please.....no more videos...