Mechanical Iris Prototype - Made from Laser-Cut Wood
Тәжірибелік нұсқаулар және стиль
Template available here: makerdesignlab.com/experiment...
This is my first try at making a laser-cut mechanical iris. Made from 3 mm plywood. The dowels are cut bamboo skewers.
Пікірлер: 38
I don't think I'll be able to live to see the end of the list of ways an aperture can be constructed
@Crow-gp3ci
Жыл бұрын
a what?
@Kokice5
Жыл бұрын
@@Crow-gp3ci en.wikipedia.org/wiki/Aperture?wprov=sfla1
@czpiaor
Жыл бұрын
@@Crow-gp3ci an aperture
Beautiful and intruiging.
Thank you , perfect video
The parakeet / parrot in background is singing beautifully
Nice
nice one of the simplest version of mechanical iris I have seen so far. one question though, there is an opening of hexagonal shape even if you completely close the shutters can we completely close it or its gonna be there?
@makerdesignlab3582
3 жыл бұрын
Thanks! In this version, the little hexagon can't be closed. The reason is that I did not account correctly for the size of the ring on the end of each blade. When I realized this I did not want to resize all the gears and so just made the blades a bit smaller to prevent interference between them. It is possible to make a version that closes completely by either making the pins/ring smaller or by scaling up the other parts relative to the pins/rings.
@Tailspin80
Жыл бұрын
Pentagon actually
thanks you < 3
Perfet !,
what is the thickness of the holes and the wood inserted? pls lmk
Really cool what laser did you use to cut the parts?
@makerdesignlab3582
3 жыл бұрын
Thanks! I used a Trotec Speedy at my local makerspace to cut the parts.
How are these toys manufactured in large scale? I can understand the diy process. But on a large scale, I am not sure how they make it faster. Beautiful design by the way!
@makerdesignlab3582
2 жыл бұрын
Thanks! Unfortunately, I don't know about manufacturing on a larger scale...
@carthous
Жыл бұрын
with multiple laser cutters.......
@lawrencelenerd3988
Жыл бұрын
Dies and tooling
@partciudgam8478
Жыл бұрын
You could make a master set, and use it as a template for silicone molds and cast resin or some low temp alloy like zamac and sand molds or cnc router to work an entire board of the parts or if you can afford it, get some machined dies and plastic injection, that will be expensive
no no the whole thing needs to fit inside a stargate frame :p
Which wood is used?
@makerdesignlab3582
Жыл бұрын
I used birch plywood
Transformers recreation getting closer to accuracy.
Can you give its dimensions and blue print??
@makerdesignlab3582
Жыл бұрын
This has a diameter of approx. 8 cm. In the description below the video is a link to the cutting template.
@ABHISHEKSHARMA-dr1uf
Жыл бұрын
@@makerdesignlab3582 oh thanks!
Has lasik
My dad would call that a "Bull- $#/7 Grinder"
The idea behind an aperture is that the opening is only in the middle and circle shaped at best. The blades need to overlap or to hug each other to not have these openings in between.
Can You share the draw
@makerdesignlab3582
12 сағат бұрын
The link is in the video description
Please make Beyblades in next video please I like your viy
Video could have been 15 seconds long.
@1three7
Жыл бұрын
Can't believe he wasted 41 seconds of your time! Just unforgivable!
@KateYagi
5 ай бұрын
Video speed controller can let ya put it past 2x speed.