Car Care Nut is quickly becoming the best car repair channel on KZread. I can't get enough

@bubba4072

Жыл бұрын

Already is.😄👍

@CynideCypher

Жыл бұрын

Always has been

@raptorgamer8878

Жыл бұрын

You know it!

@Len10293

Жыл бұрын

I only wish that he would be closer then 1000 miles away

@joepostada8317

Жыл бұрын

He’s not becoming The Best He Is The Best A men

Has anyone else noticed the Care Care Nut's channel DOES NOT have commercials that continually pop-up while his show is playing versus some of the other Auto Mechanics channels whose name(s) I will not identify? It's really refreshing he doesn't run commercials on his channel. Thank YOU Care-Care_Nut

As a DIYer I’ve always been frustrated that engine codes never have a straightforward explanation online. This video made it clear to me why. Thank you!

You are restoring my faith that good mechanics are still out there. Keep it up and God bless!

You are an outstanding mechanic, and we need far more people like you in the repair industry.

@grahamstevenson1740

Жыл бұрын

He's THOROUGH. That's all it needs, not 'quickly jumping to (false) conclusions'. It needs thinking stuff through, not a knee-jerk reaction.

@normcook9335

Жыл бұрын

I suspect we don't because there's not enough money in it. It requires a huge amount of very detailed information, but I doubt the pay reflects that.

@elcidcampeador9629

Жыл бұрын

@@normcook9335 That is not my suspicion. The average labor rate for mechanic work is $110/hr roughly. Obviously the cost of running the shop absorbs a good amount of that, but even if mechanics get half of that, that is a good wage these days. More likely the case is that we have lazy boys and young men who, instead of pursuing trades, sit in mom and dad's house until they are 30 and live on government hand outs and minimum wage jobs. The labor participation rate among young men is lower than perhaps ever in American history, and for every 5 men who retire from the trades in general, only 1 or 2 replace them. The trades pay very well these days. Apprentices usually start around 55k, and I know that established contractors are easily pulling down 150-200k a year if they have a good work ethic and organization. I see no reason why a good mechanic like AMD cannot achieve similar levels of success.

@Weathernerd27

2 ай бұрын

@@elcidcampeador9629 I'm an electrician working under one of the big unions IBEW local 46 and you are right about about trade work, $47 to $70 per hour for a job that doesn't require a college degree is very good pay but there are a few major drawbacks to working in the trades. 1) Commute, I get sent to construction sites all over the county and my commute is often really long. The company makes 0 effort to place people at construction sites near home in fact if you are good they are more likely to send you to the further away to the problem sites. I've been living in a Van during the workweek and comming back to my condo on the weekend because I got tired of 1.5 to 2 hour commutes. 2) despite the high wage we don't get much vacation or sick pay so during COVID many of us came to work sick and one point more than half the crew was out with COVID. I can take 2-3 weeks off per year because I'm single and good about saving money but some of my co workers with big family bills can never afford to take a vacation. 3) The work is not steady you tend to be either doing alot of overtime or be sitting at home wondering if you can pay next months rent. When times are good you are working most of the time but during recessions there may be no work for several months. When you factor in the lack of vacation pay, lack of sick pay, downtime, the cost of a long commute and sometimes having to pay expensive city parking out of pocket its not as good a wage as it first seems. I'm not saying that trade work is bad it still pays better than alot of jobs but I think one needs to think about if they can handle the dirty/physical labor, bad commutes and stretches of heavy overtime before they get into the trades. I've given up on having a family because I don't think I'd have the energy to be a good father/husband after a overtime day and a long commute and I see too many of my co workers having to move back in with Mom and Dad when they get divorced because after paying alimony/child support they can't afford the cheapest apartment. Working for a shop doesn't pay quite as good but is probably steadier but it has to be the right shop because I've heard horror stories about shops that are super stressful and rush you to the point where you can't do a good job. I think the bad shop is more common than the good shop unfortunately.

The way AMD goes about diagnosing the car’s problem systematically using Y/N algorithm, reminds me of how an experienced Internal Medicine practitioner goes about diagnosing a patient’s medical problems. He is like a medical doctor volunteering his time and talent in the community by educating us so we will not be taken advantage of. Thank you AMD for your community service.

@cwstout1

Жыл бұрын

Of course he is like a doctor, look how clean his operating room is.

@iam1smiley1

Жыл бұрын

I think it's easier to be a doctor! People are all basically the same, every car is different. A modern automobile technician is more like being a zoo Veterinarian as far as complexity goes.

@mr3klax

Жыл бұрын

@@iam1smiley1 I think you have a point. For one, cars can’t talk and say what’s wrong with them. People do. Uhm. 🤔

@tcwaterdrill

Жыл бұрын

Please do not compare a Doctor to a lowley auto mechanic. I had a car accident years ago and went to a head doctor who sent me to another head doctor because of memory loss. She gave me a bunch of memory test and when I could not pass them I was told to just guess. She asked my wife to come in and asked her a lots of questions, never once did she ask my wife if she kept up with what I did day to day before the accident, if she had, my wife would have told her, that she had long ago stopped trying to know what I did day to day because it was not something she could understand when I talked about it. In the end she asked me to leave her office after I told her I could see she had not delt with my type of case before because of the info she just kept not wanting to take note of. I told her I needed a doctor with knowage of head injuries. I told her I was not calling her a bad doctor but like good gas and diesel mechanics gas and diesel both might not be their strong thing. She got real mad when I used a mechanic as a example and listed all her college degrees and time she spent there, never once did she say she had treated people with car head injuries that I can remember. But she was real quick to perscribe pills and send me on my way.

@iam1smiley1

Жыл бұрын

@@mr3klax I used to think cars didn't talk but I often have my morning cup of tea, while having a scan tool conversation with whatever vehicle pulled into my yard. I'm surprised how much they'd like to tell me these days. Maybe those nutty old ladies who said their car had a personality weren't that far off 🤔

I’m a Mobile Mechanic for over 10yrs, and I’m learning a lot from you. Particularly attention to details. My main weakness is always diagnosing electrical problems. You just solve my it by simplifying the diagnosis process. Thank you,

@gus892

Жыл бұрын

Problem is too many cars have too many modules and it's getting worse. and expensive. cars getting not simpler but more complicated. Show us how to fix the computer. I knew a guy who bought cars cheap with bad computers and fixed them for a good profit.

@joewalton2726

Жыл бұрын

Electrical is my weakness as well. I'm leaving from him every episode. Love this channel

@reubenmorris487

Жыл бұрын

@@gus892 You need some specialized training and "know-how" to successfully repair an ECU.

@williamsarver2491

Жыл бұрын

I agree- he gives a great overview then the specifics

35 yr Industrial Maintenance Mechanic here , love the KISS rule, love the way you keep your hands in your pockets when you walk up to a "problem",never assume anything, 9/10 times it's experience that helps. hey kids , I had a shop teacher like him! pay attention in class boys and girls!

You belong to a tech institute!!! We need more techs like you.

@raptorgamer8878

Жыл бұрын

Do you mean? HIS OWN TECHNICAL INSTITUTE ( THE CAR CARE NUT INSTITUTE)

@MoeLarrycurly1

Жыл бұрын

,👍👍

@h.fontanez5453

Жыл бұрын

@raptorgamer oooooh, love that.

@bobninemire5154

Жыл бұрын

His teaching abilities are excellent !!

@johnconnor2402

Жыл бұрын

Lots of tech institute are scams though..

Well done. Unfortunately happens way too often. Essentially those shops that don’t have the skills/ethics have a license to steal.

@mambi74

Жыл бұрын

Yes, and so many of them victimize the customers who can least afford it. It maddening as hell.

@yarisygatos

Жыл бұрын

Is there no legal recourse, small claims court, lawsuit?

@TonyRule

Жыл бұрын

Vehicle owners need to get used to paying for the diagnostic, and get a guarantee that the business stands behind it. Sure, in some cases it'll need to be made clear that there may be other issues that can only be revealed and diagnosed after the first problem is fixed, but that is rare.

@johnstack5008

Жыл бұрын

@@yarisygatos Not really. You could take the shop to small claims court. the mechanic will tell the judge that even though the replacement parts didn't fix the problem, the parts were bad and needed to be replaced. You not being a-licensed mechanic would not qualified to dispute that, so the judge will side with the shop.

I love your channel. Most technicians use the parts cannon because they are paid flat rate to change parts, not to diagnose. The reason they had it for a week was it was a come back, they worked on the gravy jobs first. I apprenticed and went to school 2 years. The techs gave me the cars their parts cannon didn't fix because I worked for 5 bucks an hour and could take my time. The owner of the dealership had me work on a car his neighbor bought because one more time and it would be returned under lemon law, and he was embarrassed. He told me take as long as I need, but fix it right. It had fuel trim code, they had changed fuel regulator, fuel pump, etc. I connected scan tool and took it for a drive to see what fuel trim would do (newly hired, barely knew anything about EFI as I grew up with old cars with carburetors). As soon as I left the noisy shop, I could hear the vacuum booster hiss when braking and fuel trim changed under same conditions. I pulled back into the shop and asked parts man to order me a booster. He thought I was crazy, called the service manager, said it's a fuel problem on the order and I wanted brake parts. I explained to service manager how vacuum leak was throwing off fuel trim. He told parts man to order it. Service manager loved me after that, Car never came back. After becoming certified, I was put on flat rate. The techs with seniority got the easy jobs. I might get hard ones or none at all, book 20 hours in a 45 hour week. Get paid $14 when customer got charged $95 (20 years ago). I went back to my desk job. Around that time, my friend took his Volvo to dealer, bad catalytic converter, $1800. He brought it to me. I had no scanner so I changed his downstream O2 sensor, threw an upstream on too in case cat was bad from running rich, left cat alone, code never came back. Saved him $1600 even without a scan tool using my parts cannon! Another friend had hard starting after car sat over night, I pulled out the parts cannon and shot a $50 fuel regulator at it, cheaper than $130 diagnostic quote. Sometimes the parts cannon saves money, but I recently bought a sophisticated scanner with bidirectional capability. Now I'm relearning after being out of it for 20 years. Your channel is great!

@mousetoad7040

Жыл бұрын

@Paul you are so correct! Sometimes they don't know any better, sometimes they want the scrap $$$ that oem ones bring. Factory Cats rarely go bad, unless something is causing the engine to run rich and they keep driving it that way. I just changed the cat on my 2003 Corolla with only 99,000 miles on it. No codes set but there was a hole rusted through the case! The whole car is rusted out from road salt, a shame. Runs great. Probably 80% of catalyst inefficiency codes I see are bad downstream O2 sensors. Not a bad idea for folk to get a 2nd opinion on costly repairs.

I’m grateful for the effort you make. It is priceless information for a mechanic like me that doesn’t work on as many vehicles as I used to due to changing careers. However I still need to work on my own and kids cars. Proud to be part of the Car Care Nut family ❤

For even a master technician, there’s always a lesson to be learned. AMD shares his knowledge so other can also learn. Hopefully, this customer can return to the previous shop, explain their situation and obtain a refund and their old cam sensors.

@michesbianan

Жыл бұрын

Definitely, at least get his old original cam sensors back.

@master6435

Жыл бұрын

@Jean Cassel my bet is the mechanic placed them in the new boxes from the replaced sensor and returned them to whatever part store they got it saying the part is defective

@mousetoad7040

Жыл бұрын

Good luck on that. As for the old sensors, they got paid for the new ones, they likely went into the trash. Never know though, some techs will throw parts they know are good in their tool box...

@master6435

Жыл бұрын

@Mouse Toad boy you have never been behind the counter of the commercial department at autozone I have had and seen shops buy O2 sensor ac blower resistors and days later send back the old part saying the part is defective if we say no to return the shop will complain to the boss of the commercial department boss or say they won't buy from this location anymore

@mabeljoe4305

Жыл бұрын

That shop probably trashed the old cam sensors and its at the trash site.

A great ending to this would have been to talk to customer see if they will agree to getting a new ECU. Then change it and show us all is well!

@stevenlefebvre2991

Жыл бұрын

Excellent video.

Aside from an excellent technician, I commend this man for saying "May the Lord bless you and keep you" at the end of every video. May God bless him and everything in his life

@brokenujoints3811

Жыл бұрын

I agree. He has wisdom, which is a gift from God.

@amazdrm

Жыл бұрын

Amen.

Its a shame we can't clone you and put you in all garages around the world! lol. You are like the vehicle detective, you have a very methodical and logical way of working, its a shame not all technicians are as intelligent as you!

@samuhell14

6 ай бұрын

Sometimes it doesn't have to do with intelligence but rather lack of motivation or desire to actually diagnose and fix the issue. I've seen my fair share of competent techs just throwing part at a problem until either the issue or the client goes away out of laziness and\or because they hate electronic diagnosis in general. It's pretty unfortunate :(

I heard a similar story a few years ago. The customer was told they needed a new engine when the problem turned out to be a bad coil!

@wolfeadventures

Жыл бұрын

That’s called a parts nuke!

@desotosky1372

Жыл бұрын

Sister in laws car was running rough after having just been worked on several weeks prior. Took it back and the mechanics came out and diagnosed she needed a new engine by "listening" to it. After hearing that story I took her car to my trusted mechanic who found they had not secured the distributor and also some uninstalled fasteners laying loose. I don't know if they were running a scam or just incompetent.

@8avexp

Жыл бұрын

@@wolfeadventures More like, "Lucy, you got some 'splainin' to do!"

This guy is a genius would love to work for him his knowledge is outstanding

@tanveerkhan9221

Жыл бұрын

He really shouldn't be repairing cars he should have worked for nasa

@metzmatu8409

Жыл бұрын

This is what we call Competent Technician on the job, woth strong/high knowledge and skill.

In my GM ASEP class we learned the strategy based diagnosis and it was very good if you followed the steps. Complacency is the absolute worst thing when it comes to troubleshooting. The thing that fixes the issue the last time might be different this time. Also just put people on mute when they are telling you all this stuff they checked, start from scratch and assume nothing. Remember, they couldn't fix it.

The combination of presentation and professionalism is just mind blowing! Better entertainment AND tutoring than you'd get anywhere.

Very interesting video. I was an electrical maintenance technician and you're absolutely correct! The correct diagnosis is the key to the correct repair and not being a parts changer.

@metzmatu8409

Жыл бұрын

I used to be a process technician and a few years later become an Electrical and Instrument Technician for 25 years, but not in automotive. AMD is very knowedgeable and skillful in his field job, and right kind of approach, thinking process and skills to resolve the issue at hand. These were the kind of Technicians I enjoyed to work with after I was promoted as Plant/Facility manager til I retired 5 years ago. God bless AMD as he works and manage his own workshop at the same time sharing to the community.

@MPGunther1

Жыл бұрын

@@metzmatu8409 👍

It also helps to learn to keep the area under the hood clean.

I ALWAYS give this guy a thumbs up as soon as the video starts.....and he's NEVER let me down!

I'm very fortunate that I live close to him and he services my 2 Lexus's. He's just a great stand up guy!

Glad you took the time to teach the viewer how to do a proper diagnostic before the parts cannon gets activated. Now, the option for this customer is to get a used ECU and have re-VIN to this vehicle and call the day. The only roadblock will be having the scanner and the interface in hand to write the new VIN on the ECU. Something that I hope The Car Care Nut has in the shop.

This is a wonderfully done video with some great information in it. Car Care Nut certainly knows his stuff! There is one more thing I would suggest just to be 100% sure and that is this. When checking the wires for shorts or continuity tests, wiggle the wires from the sensor connector to the computer. This is just in case you have an interment problem with a wire shorting or opening.

we need people like you in the industry with special skills in automotive repair and maintenance, hope you will continue to educate us more with your work. Thanks a mil... cheers!

The leaves in the cowling drive me nuts. I guarantee the cabin filter has never been changed cause those leaves clog them

I wish there were more mechanics like you. I had a jdm swapped engine from a local shop, the labor and engine included was just too cheap to go through the hassle of swapping it myself along with a 90 day warranty. Well a month after the swap, they did a good job with getting everything in there but the vehicle ran rich and I diagnosed it myself down to only leaving bad fuel injectors. I get there and they just tell me change this, change that without even looking at fuel trims.. I show them fuel trims and the mechanic doesn't seem to even understand what they were. I argued for a bit but finally got them to get some different fuel injectors and it solved the issue right away. If I wasn't mechanically included, I would probably be screwed in the same situation.

@ronchappel4812

Жыл бұрын

This is awesome!

Great video love how you walked the viewers through the step by step diagnosis

So nice to see how you go through the diagnosis process. It helps a lot. Thanks.

Once again, thanks for your knowledge and sharing with us and also thanks for your honesty and integrity.

Another excellent and informative video by the Car Care Nut. Thank you!👍

One of my favourite series on car care nut eagerly waiting for next electrical episode 😍

I enjoy step-by-step diagnosis with interventions and look for the outcomes. Great learning process

This is a great video. The explanation and step by step process is so informative. Thank you for taking the time...

Another great video, BUT I am not 100% convinced that the computer was really faulty. There is still a chance that it could have only needed a simple reboot or re-install software. I once had a TCC PWM lockup problem on a 4L60E that ended up being due to faulty computer. I think this may be more common than people realize as most people seem to by default just simply eliminate PWM TCC lockup, not realizing that it could be computer related (also while not realizing that PWM lockup converters should not be used without PWM lockup due to different clutch material). Everyone, including transmission experts claimed the vehicle needed a new transmission. But I kept testing the transmission and TCC thoroughly and it all tested fine, including continuity. Finally I started throwing a few parts in my despair, still not success. Only when I switched ECM, the problem 'miraculously' disappeared and hasn't appeared since.

@uli3119

Жыл бұрын

What do all these acronyms mean?

Another Brilliant video. OMG, your skill set is really something.

Can't thank you enough for sharing your knowledge with the community. I'm just an avid DIY person and just by learning from your videos, I have done ton of works with my 2002 Sienna, 2011 Camry (2 of them), and 2015 Rav4. They're currently still on the road as of today. Once again, many thanks.

The best troubleshooting and a ton of wisdom in this video! You’re one of the good ones!

This is exactly the kind of video I like to see you doing. The most important thing i learned here today about toyota is that the engine operations are in the big connector and small has body functions. I also enjoyed the process you use for double checking. I would do the same thing. Thanks please do more like this specially with the Camry :)

Great videos! I’m so glad you randomly appeared in my feed. SUBSCRIBED! 👍🏻👍🏻

This is really an auto repair and maintenance class. We are learning so much from you. Thanks so much.

From the DIY perspective, trouble codes are exactly what AMD said towards the end. It's a place to start looking, not a prognosis to start replacing. What's helped me tremendously in pinpointing problems is going through the voltages the part or sensor is expecting to see. My last issue started with a crank position code, which long story short, ended up being perfectly fine. I fell into the trap of replacing it initially, only to yank it back out, cleaned and put a lil dielectric grease on the old one, and voila, perfect function again. That was after doing 8 plugs and coils, then having another issue pop up where the MAF wasn't seeing the right values and started misfiring at startup but cleared once it got up to temperature. Cleaning it unfortunately didn't fix the problem but a new one from Toyota did. Case in point, I wasn't getting an MAF code, but checking all the systems data values to figure out what was really the problem got my truck working again. Had I taken it to a shop, who knows what the final bill would have been, but an educated guess would be north of $2000. Where I really got mad was paying for an allegedly Denso product only to receive a generic POS that was more problems than it solved. I'm now Adamant that only Toyota parts are going on mission critical components! Even if aftermarket parts are cheaper, there's no guarantee they will produce the expected signal or have the correct value the ECU wants. At that point, having to deal with shipping delays and ripping the engine apart twice, it's just easier to go OEM and do the job right Once.

The Toyota dealership in Loves Park, IL told me I needed an ecm in my Scion IQ without even looking at it. I have intermittent abs/Trac control light on. Service advisor said "it's always the ECM" and refused any other possible reason, seeing as I was there for a cvt fluid change and had the car back to me in less than 30 minutes. I think I'll make an appointment on your website for the spring, I want real answers from someone I trust.

@mikesabin8568

Жыл бұрын

I work on cars in Rockford Illinois. I can easily figure it out for you jake. Im electrically savy. Money back if we dont fix it… but, I always figure it out, so good luck with that.

Thank you for this video and thank you for sharing your knowledge. We are grateful for your presence on KZread

The video is very informative and his approach is very excellent in diagnosing the problem. I always watch your videos and learning a lot of it. Thanks AMD

Your even teaching mechanics how to do their jobs. Your awesome! I always struggled with electrical diagnostics because I never took the time to fully formally learn about what each test is and means and how to do them. I know some things. But I was smart enough to know what I don't know and get someone else involved when needed.

You just did a Awesome job on telling everyone how to find the problem that’s why your a Master Mechanic and not not a parts changer it’s So Awesome to have a Trueful Mechanic and so Honest to he’s Customers I no in my heart you’ll always do what’s right for your customers and keep them Rolling Down the road with no worries 👍

@desertstar223

Жыл бұрын

A bit of respect. Master TECHNICIAN, not Master Mechanic 😅😀😃😄

@mailmanjoe

Жыл бұрын

He's a perfect example of "You're paying for quality, you're getting quality work". 👌

Ladies and Gentlemen, this man knows his stuff when it comes to Toyota! 👏👏👏

I'm so glad I stumbled across your channel, very informative. Happy to see someone take pride in their work. Really impressed with how clean your shop is, only wish you were here in california. Thank you for your content.

I think you should also check the wires to ground and 12V with the computer connector connected (check them from the VCT end). If the possible short is to a wire that is coming out of the computer, where most of the wires in that bundle come from, then with the connector disconnected you may not see the fault. The faulty wire at the VVT end should be open the other may show ground or some voltage.

What you said at 23:00 about what the computer is saying about a code is what I have been preaching for years. Read the book on why the criteria is required to SET the code. Never throw parts to fix a problem. Diagnose it! Thanks AMD! I fell down that rabbit hole once. Both banks rich on. L29 454, couldn’t figure it out and finally gave in and replaced the o2 sensors. Gut said no, rich bank 1&2 could not be BOTH o2, parts don’t fail in pairs hardly ever. Guess what, wasn’t it. Used aftermarket sensors and that caused another issue that wasn’t apparent. Ultimately it was a leaking fuel press regulator and then I found my non AC Delco sensors didn’t have the shell to sensor grounded as required by the shop manual for them to work. Wasted a lot of time. Thanks AMD!

@mrtopcat2

Жыл бұрын

Good points that I share. I very much like this channel, but was unfulfilled that we did not see an update AFTER the fix. Also I am still not 100% sure the computer is really faulty. It could have needed a simple reboot or re-install software.

Thanks for giving us the information to help us to seek what is wrong with our car.

This is a very good tutorial, I mean not on the detail. But just the analysis is so important. If you feed a Search engine the wrong question, you will get the wrong answer. Great example of the Tablet/Smartphone generation. They need to be told what to do. The old style 80's/90's generation is before the Tablet/Smartphone era, so they take the next mile to find out and how to isolate the problem. That's why this man, will not only function as Senior mechanic for cars, but actually he can work in every field where problems are and knows well how to get the root cause. No correct root cause, no fix!

I'm shocked you could concentrate on the work with all the leafs there :)

@Reggaejames

Жыл бұрын

It would be so satisfying to get a shop vac and just suck them right up!

I think in this instance with a budget which might be tight. It might be a good idea to start looking into salvage yards, find the same make/model/year of car and hopefully one without damage to the engine area. Someone could most likely find a computer for a fraction of the cost of a new one. At the very least, if the car is a write-off otherwise, there's not much to loose.

@walter.bellini

Жыл бұрын

Agreed

@slingbart705

Жыл бұрын

go to a Pick-a-Pull with an empty tool box...$2 entry fee, case closed

As I’m catching up on the past videos, I’m always learning with you guys. Thank you.

I'm glad I found this channel, very enjoyable content and quite professional.

Yes, you proved the wires can carry voltage, how about current? Eric O and others use a high current draw bulb to prove there isn't an issue say like in a splice somewhere in the harness. My sister scraped a car because the transmission would down shift at highway speeds! Shop couldn't figure it out. Without looking at the car, but a wiring diagram, I believe the issue was in a factory wire splice down low on the core support. I believe the TCM was loosing either power or ground and the transmission would go into limp mode which was probably 2nd gear!

DIY car enthusiast here. I definitely did a parts canon with my mom's car when it didn't start. I replaced the starter, and turns out it was a simple blown fuse. Hard lesson learned. Now my mom has a new oem starter for years to come (i ended up eating the cost of the new part lol). Thank you for the video AMD!

I started viewing your videos about three weeks ago and I am absolutely impressed with your knowledge,integrity and meticulousness in diagnosing and performing repairs.So much to learn from your videos which is anagolous to taking a course in car repair/maintenance. I did my fair share of maintenance on my father's Toyotas which happen to be my favorite make also.In my book you are the GURU of Toyotas and I learned a lot more since viewing your videos.The passion for your craft is palpable and in my estimation a high bar ethically for others in your field to emulate as mechanics like yourself are few and far between.Hope you are not a dying breed because a technician of your caliber is definitely a source of inspiration for budding mechanics to follow. Keep up the tremendous service that you provide to enthusiasts on this platform. Thank you so much👍👍

I like your style, honest & straight forward!!! Thank you...

The shop I go to always diagnose first and charges for the time. Actually saves you $. I do many repairs myself but when it’s beyond my level or tools like a hoist I know they fix it right the first time 😊

@davidcameron1378

Жыл бұрын

Yes, charge me for a diagnostic! I'll pay for someone to honestly work through to the root cause.

I have learned so much and saved SO much $$ by watching this channel and Scotty K. Thank you both for unselfishly giving people the knowledge to do the job on our own and/or not getting ripped off by unscrupulous mechanics.

@ColonelFusion

Жыл бұрын

ugh.. I blocked Scotty Kilmer's channels a long time ago. There's no comparison here. AMD/Car Care Nut is high quality stuff.

@TheRicherProductions

Жыл бұрын

the car care nut is a far superior mechanic at attention to detail and explaining everything. scotty is overrated.

@IndianMC-jf3cp

Жыл бұрын

@CallMeehCaptain I disagree but, you're entitled to your opinion.

@IndianMC-jf3cp

Жыл бұрын

@@ColonelFusion blocked? That's pretty extreme. Was it political? I'm guessing you didn't like his criticism of Biden.

@ColonelFusion

Жыл бұрын

@@IndianMC-jf3cp NO. It's not political and I don't appreciate the ignorant assumption. Scotty is a highly opinionated mechanic and he's just sometimes flat out wrong. The reason is years ago he was going nuts with click bait headlines and thumbnails to get views and it was too much. I unsubscribed but kept getting recommendations to watch him. Blocking the channel stopped all that. Look back like 3-4 years at his stuff on his original channel and you'll see plenty of examples of the over the top click bait.

Excellent. Perfect demonstration and explanation.

Good diag. Very informative. Wish all technicians were all as good as you

i agree with your process of checking power on both legs of the sensor. However, when checking for shorts to ground you should have your meter on resistance to the negative battery post to check for a grounded wire. a grounded wire will not have any voltage on it.

@bronx-gr

Жыл бұрын

that is why he had it connected to the POSITIVE battery post as well as negative. A grounded wire will show -12V there (red lead to test point, black to positive battery post), if he sees -12V, done, short to ground.

@53thumper

Жыл бұрын

@@bronx-gr Thanks, I appreciate that perspective. Since the sensor is powered by the ECU if it was shorted to ground it would have caused a failure of the ECU and not necessarily blown a fuse. If it had been power fed from the fuse box then the fuse would or should have blown, but still checking that way would confirm a grounded leg of the cable harness to the sensor.

That poor Camry. I have a soft spot for Camry's. I owned a used 86 & 97 Camry. With all those leaves in the cowl, I thought for SURE mice ate the wires. Now, can u pick up a used computer from a junk yard? I hope they read this, get some Mother's Aluminum polish to clean cataracts from headlights.😉 Good luck with your repair! 🖖👍🇺🇸

@dans_Learning_Curve

Жыл бұрын

After polishing, do you coat the len with something?

@michesbianan

Жыл бұрын

Agree, depending how long they want to keep the car, a junk yard part can be an option.

@riceburner4747

Жыл бұрын

@@dans_Learning_Curve O believe it IS a polish. Jst when they dull down, repeat again, its a cheap fix.

@Blakecryderman7244

Жыл бұрын

@Rice Burner me too, I own a 1986 blue 2 tone Camry liftback 5 speed manual. Manual everything except steering. Just bought it 3 weeks ago from the original family. The interior & exterior are in amazing condition, only 187,000 kilometres on the car, which is definitely super low for being almost 37 years old. The interior is an absolutely gorgeous blue. Currently replacing the CV axles & struts on it myself. Using quality parts. Even though I’m only 15 I’m wise and keeping it stock and original.

Love seeing the UTI multimeter. im currently going there now and finished a couple of the electrical courses. watching this walkthru of a real diagnosis was just a step-by-step of doing things by the book. test the component, component is good. next check the connections, and my heart sank when the harness connection was good, because i knew what it meant. It's almost amazing how easy this as soon as you start thinking logically about things. Thank you for all your videos, I am learning so much from them!

A beautifully-curated example of troubleshooting. Top notch as usual, take care and thanks for all the good work.

Your videos should be used as training for dealership technicians.

Did the aftermarket parts kill the I/O on the computer?

@jamram9924

Жыл бұрын

No. The hard code was stored in the memo of the ECU. After the soft codes were erased, the hard code remained.

@michesbianan

Жыл бұрын

Jury is 50/50 on that one.

@mph5896

Жыл бұрын

The original part could have killed the engine computer. But its gone, so no way of testing it.

Solid. I like your methodical approach to things! Keep it up!

Definitely a logical approach for checking continuity and checking wires. Great video

The reason why I learned how to repair my own cars was due to my mother being ripped off by a dishonest mechanic. She paid almost $2,500 in repairs and they never fixed it.

The fact that we are in the dead of winter and the cowl is still full of Fall leaves/acorns, tells me this owner is not exactly into car maintenance. Of course, I am assuming (dangerous…I know) this was filmed recently.

@burntnougat5341

Жыл бұрын

You just described 50% of toyota owners lol

Great diagnosis! Keep pumping more videos!

Brilliant video. I can only echo all the other positive comments. The way you work is inspirational

Great video. One question regarding the diagnosis. Shouldn't the wires be load tested in case they are slightly damaged where the meter would read no resistance but wouldn't be able to carry enough current under load?

@vg3430

Жыл бұрын

Yes…in my opinion, you are correct. I have tested circuits before that passed continuity tests, but due to other physical damage (loose connections, corrosion, wires half chewed) they were unable to carry the required load (current). Granted, these OCV’s probably don’t require much current to activate…but a test worth doing before charging $800-900 for a new Toyota ECM. My opinion only.

Most times you can't just blame the mechanic most times the customers are cheap and don't want to pay properly to get the work than right. But I hope the previous shop sees this video and should be ashamed of their work.

Thank you from New Zealand. You truly have the best toyota videos

as i was maturing in the auto industry I had to take many courses on diagnostics and electronics to keep up with the tech of modern cars , I even took some courses multiple times just because sometimes in a class environment you miss a detail or two or if you dont use what you learned often enough you tend to forget details. Problem today is that tech is moving so fast not even dealerships can keep up. I have repaired many cars that were botched by dealers cuz of the way they work and time limit put on techs . Its only going to get worse. NO new generation ( snowflakes) want to get their hands dirty and actually do work.

@potatopotato8360

Жыл бұрын

Being an actual good mechanic nowadays able to deal with modern car problems (not changing parts) requires engineer-like aptitude and intellect. But the problem is most such talented individuals would rather work in well paying high benefits STEM instead of toiling away on the most challenging issues for flat rate.

Love how thorough you are. Wish you weren’t so far away.

Thank you for clarifying the issues. I appreciate your job.

This channel is gold. A must have!

Great work as usual. Hopefully a follow up video on the replacement of the ECU can be next. You can show us how to program the new ECU to the VIN.

Thanks AMD for your diagnosis on this video and model because I've seen these problems on other used cars.

You're an amazing mechanic and a great teacher, I hope you pass on your ethic and knowledge to lots of interns over the years.

Great information,! Diagnosis is so important, but unfortunately now days so many shops become parts replacers and it has really hurt our industries integrity. Great job I am so glad I found you channel. I've been working on cars over for 40 years and I still learn things everyday.

Amazing Ahmed really enjoyed this video keep them coming i am a little weak in the electrical stuff so glad to learn from you and the use of a Multimeter.

You deserve all the likes. Well done Sir! Thanks for being the most honest and ethic mechanic i've ever met.

You make that diagnosis look easy. That's skill, experience and a fair bit of intellegence at work.

i need a mechanic like you in northern new jersey god bless you for being honest and for sharing your knowledge

This man just showed up on my home page and I've been binge watching. It's so refreshing to see someone who's knowledgeable and kind at the same time.

such a great man! I wish i had the honor to learn from you or somebody as good as you every day!

I love that you take the time to explain this. Troubleshooting principles crosses all lines of equipment. You'd die knowing the mistaken TS on aircraft costs are.

Great video, it takes a little time but to check something correctly is the key to good outcomes.

I’m becoming a big fan of your channel. Every video I have watched is full of knowledge.

Thank you so much for posting these videos