mecanume wheel rc car_how to make a radio-controlled car with a 3d printing
2021.10.15---------------------------------------------------------------------------------------------------
STL file and coding source are shared.
www.thingiverse.com/thing:502...
blog.naver.com/3dfuns?Redirec...
---------------------------------------------------------------------------------------------------------------------
This is a production video of the Mecanum Wheel RC car made using Arduino and 3D printing technology.
You can control and play the dynamic performance and control environment of the mecanum wheel.
It was modeled using Fusion 360 and wireless control is possible with Wi-Fi communication.
We hope that it will be a small inspiration for all makers who are eager to create creative RC mobile by referring to our contents.
Materials necessary for production, such as STL files and coding sources, will be uploaded to thingiverse and our blog in two weeks.
blog.naver.com/3dfuns/2225221...
[Hardware parts used]
3DFUNS Pro Mini(Main Board) - x1
ESP-01 Wifi Module - x1
3DFUNS Contents Board - x1
MG90S Servo Motor(360) - x4
LED Board - x1
16340 Battery - 650mAh x1
Mecanum Wheel(48mm) x2 pair
[Application]
Roboremo
Thank you.
_______________
*BGM
MaxKoMusic
bit.ly/2SKXdwN
-----------------------------------------------------------------------------
아두이노와 3D 프린팅 기술을 활용해서 만든 메카넘 휠 RC 자동차의 제작 영상입니다.
메카넘 휠의 다이나믹한 퍼포먼스와 컨트롤 환경을 제어하고 플레이 할 수 있습니다.
퓨전360을 이용해서 모델링 되었으며, 와이파이 통신으로 휴대폰으로 무선 컨트롤이 가능합니다.
우리의 콘텐츠를 참고해서 창의적인 RC 모빌 창작을 열망하는 모든 메이커들에게 작은 영감을 주는 콘텐츠가 되길 바랍니다.
STL 파일과 코딩 소스 등 제작에 필요한 자료는 2주 후에 싱기버스와 우리의 블로그에 업로드 될 예정입니다.
blog.naver.com/3dfuns/2225221...
사용된 부품
3DFUNS 보드(Pro Mini) - x1
3DFUNS 컨텐츠 보드 - x1
MG90S 서보 모터(360) - x4
LED 보드 - x1
16340 배터리 - x1
메카넘 휠 (48mm) - 2pair
어플
Roboremo
감사합니다.
______________________
*BGM
MaxKoMusic
bit.ly/2SKXdwN
Пікірлер: 25
Excellent engineering and design! Thank you for sharing.
@3DFUNS
2 жыл бұрын
thank you~
Wowww
Amazing design!
@3DFUNS
2 жыл бұрын
thank you~
Супер! :)
@3DFUNS
Жыл бұрын
:)
Great project 👍
@3DFUNS
Жыл бұрын
thank you so much~ ^^
Great design.
@3DFUNS
Жыл бұрын
thank you so much~
Nice
Looks really cool, do you sell them?
Are those some special wheels? Moving sideways is cool.
@CJfoks
2 жыл бұрын
They are called omnidirectional wheels.
3d프린터는 어떤거 쓰시나요??
@3DFUNS
2 жыл бұрын
큐비콘 싱글플러스 사용중입니다.
사용된 하드웨어 부품 판매는 언제쯤 하시나요?
@3DFUNS
2 жыл бұрын
반도체 수급 이슈로 시간이 좀더 필요할 것 같아요. 공급을 위해 다각적으로 검토 하고 있구요 정리되면 채널 커뮤니티와 블로그를 통해 안내드릴 예정입니다. 관심 감사합니다.
@user-pd7ei1wd6j
2 жыл бұрын
@@3DFUNS 답변 감사합니다~ 언제나 응원합니다~
@3DFUNS
2 жыл бұрын
@@user-pd7ei1wd6j 감사합니다. 큰힘이돼네요~ 연휴 즐겁게 보내세요~ ^^
Yes, I am critical, I do not understand how you present projects and that you cannot buy the most basic thing, which is the controller board, if it is impossible to create a project, would it be possible for other controller board alternatives? even though I have to admit that the projects is very, very good I want to clarify that it is not for a commercial interest, I am only an amateur and I create these projects for my son
@3DFUNS
2 жыл бұрын
you are a good dad A board that can be used as an alternative to the basic controller board used in our project is the Arduino Pro Mini. However, since pin_map is different, appropriate action will be required.
@tazmahv
2 жыл бұрын
@@3DFUNS thanks for the answer this is good to move forward in the project I have 2 projects prepared in the absence of the controller board one is the hubless bike and the mini rc skid I ask a favor if it is possible in the hubless bike project could you explain slowly how you configure the roboremo the slider and led is that I am unable to understand this app and I repeat thank you for responding and I hope it is possible to continue advancing in the projects that I love and my son much more This board supports WeMos D1 Mini MODULE, WiFi development board, Micro USB, 3.3V some connection scheme would be possible
@StarHive5
2 жыл бұрын
What did you use for the big main board that hold the battery