Mcnees PM MAC 2 3.5” Magnacut: What you need to know before buying
Initial impression of the new #mcnees PM MAC 2 3.5” in Magnacut. A supersized version of the 3”- is this blade worth the cost of admission?
#edc
#knife
#knifereview
#edcdump
#spyderco
#benchmade
#edcgear
#foldingknife
#magnacut
Пікірлер: 32
Great review bro, glad you were able to pick one up 👊
@the_pointy_end
2 жыл бұрын
Appreciate it! Have to send one of these bad Larry’s to you to review next 💪
I would of not known about Mcnees if it wasn’t for your channel, so I’m grateful. The 3.5 looks great and is definitely on my radar. Sweet model you picked up, definitely a keeper
@the_pointy_end
2 жыл бұрын
Nice! They are awesome knives. Let me know if you pick one up and thanks for watching!
@andresanchez7049
2 жыл бұрын
@@the_pointy_end You bet! I’m eyeing the 3.5 w/frag scales, should be my next knife.
My buddy bought this knife, your hands don't do its justice on how big and blocky it is. Just a solid knife. One that you could bet will never let you down.
@the_pointy_end
Жыл бұрын
Agreed! It is an amazing knife.. I have two of them now! I’m going to be doing a comparison video this week!
@whalehands4779
Жыл бұрын
@@the_pointy_end really been eyeing that auto. Have one I can get but that's because I can never find the framelock.
I finally got one of these for retail after getting beat out on like 4 separate drops lol they really do sell out fast. Mine should be here in a few days can’t wait to check it out
@the_pointy_end
Жыл бұрын
Awesome! Congrats! You won’t be disappointed. I have heard the grind on the new ones is wayyy better. Let me know how it is!
@Southernknife_addict
Жыл бұрын
@@the_pointy_end I’m definitely digging it! The edge on mine is phenomenal action isn’t completely drop shut but I’m sure it will break in
@the_pointy_end
Жыл бұрын
@@Southernknife_addict take it apart and clean it! The two I owned were the same way! Clean out the bearings with alcohol, put some KPL, and you will be good to go!
@Southernknife_addict
Жыл бұрын
@@the_pointy_end yeah I did that i normally always do I can’t help myself lol. I tuned it back together and it’s perfect now. I ordered a geared backspacer as well to bring it all together 👌🏼
Great review. Subbed.
@the_pointy_end
Жыл бұрын
Thanks so much! You are #100!!!
Have the same knife and I find if you put any pressure on the lock bar you can’t flip it open with your thumb and yeah the thumb studs do hurt
@the_pointy_end
Жыл бұрын
Very true. One of the problems with a frame lock if you have big hands! Thanks for watching!
Very cool 😎
Are these flat or hollow grind?
@the_pointy_end
Жыл бұрын
Flat! The factory edge is the worst I’ve seen… it needs work
My detent is SUPER. Stiff, could never reverse flip mine in a million years.
@the_pointy_end
Жыл бұрын
Have you taken it apart yet?
@bozcool15
Жыл бұрын
@@the_pointy_end I finally did. Loosened the tension on the lock bar. Now it’s the best edc knife in my collection by far.
@the_pointy_end
Жыл бұрын
Awesome! Glad to hear it is working for you! Yeah idk what it is but these things need to be tuned… once you get it, it’s awesome. Experiment with different bearings / washers too! Not very expensive to do so and can really change the experience!
@bozcool15
Жыл бұрын
@@the_pointy_end I already have wide washers and bearings on the way from skiff, but honestly the action is so good I might not throw them in. I love the ratios on this knife, a full 3.5 inches but it closes up to the size of a PM3. They got it figured out over at McNees.
Is there a version for MEN💪? You know, with a 4" blade?
@the_pointy_end
5 ай бұрын
😂 not yet 🤷♂️ just one that fits in a purse
@mistersmith3986
5 ай бұрын
@@the_pointy_end 😂😂😂
Nice knives, the_pointy_end.
@the_pointy_end
2 жыл бұрын
Thanks for watching!