Tinman, my first chainsaw that I worked on was a McCulloch Pro Mac 10-10, and I watched 1 video then rebuilt the carb. Kinda easy, the last owner ran it without the air cleaner in place so the cylinder and piston are damaged, rings are damaged and stuck so no compression. I'll get replacement parts and restore it with my son. Thanks for taking us with you on your journey. Be safe.

So cool you have your hands on an old mac. Looking forward to the build. Keep doing the build videos. They are very informative and cool to watch. 💪

Good video Tinman. Love the way you take your time to show us how to tare down and inspect. Top drawer.

1st! Tinman in the house! Let’s see what happens with this Mac! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

Thank you for saving another old saw.

Yeah Tinman. Look forward to seeing what you do with the piston and cylinder in detail if possible. Thanks Tinman. Lovin the Macs in the shop. 🌲❤🌲✊

I am learning so much! I really appreciate you doing this step-by-step just like if I was there. 👍

Your content is great brother. My pro Mac 60 like a champ after I bought it from a guy who had it sitting for 4 years. I barely did anything to it and she pulls. Can’t wait to see how that thing cuts with the full tinman treatment!

Great teardown vid. Thats how most of mine will be. First time teardowns. Only one way to learn to do it is to do it!! STAY SAFE friend!!

I recently acquired a super pro 70 glad your doing a build will definitely be watching more vids

Love that mac man

Coming up to 6000 subs I knew you would do it! December is starting off great Tinman! Keep on with the great video’s...❤️watching...

I love all your videos Tinman. I have now been Tinmanized!!!

I have a pro mac 700 that is a good runner in stock form. I resurrected a CP-70 with the pull start on the clutch side. It was an awesome runner with just a mild port cleanup. Good luck with it!

I now have you on both of my phones glad I added you lastnight

Good video, Keep up the good work Tinman!!!

I like the video, I'm not very mechanically inclined, but I think I can learn this stuff.

Another great video - good engineers see taking things apart as a journey of exploration! Great to watch.

Tinman, Bless you for taking us along with you on your journey. Great fun watching you create in your lab.

You must have heard me yelling, there is a screw in the handle!!! LOL Good teardown video. Blessings to you and yours.

@tinmanssaws

3 жыл бұрын

I did lol

Looking forward to an update on this one! My sp70 is dang near mint but would love to see you build this one lol. Can't get enough of the old Macs.

Aaaaaarrrgghh. Missed by that much. I have a matching 1 of these Macs. Under the cover where the oil is there is a plate that separates the oil from the engine (or it's meant to). The plate is held in place by a thingy under spring tension. I was after a look at that thingy and I was going to reach out to the masses for a name of that thingy. My Mac70 has a secret identity as a smoke blower as the thingy isn't doing it's job right.

Tinman! Great to see another video! Might be cool if you got a mount for the overhead shot/ birdseye view on the shelf above you.

Great video brother I have you on both of my phones and have been spreading the word 👍👍

We’re Canucks in the USA, so we double dip Thanksgiving, one in October, one in November 👍

That ole Mac is just plain cool

I’m getting my first 266se in trade for a custom ice fishing sled. I’m super excited. The saw is in fantastic shape! Thought of you immediately when I was offered the saw. Great video as always, tinman.

@tinmanssaws

3 жыл бұрын

I love me a 266!!

I can see the gears turning and the sparks flying can't wait to see where this goes! Always interesting when you get thrown a curve ball, great video Tinman 👍 keep up the hard work 👍👍💪💪😁!

Very interesting I'll follow along your journey till your saw works well.

I have saw envy I have been looking for a Big Mac like that one. Might as well port it now that it’s apart right!

Hey tinman your right about the echo saws the are great to run.loving the content your putting out

Looking forward to further sp70 vids. I just bought a cherry sp70 but the tear down looks similar to the job I have ahead on my sp81. Thanks for the vid and just subscribed!

WE APPRECIATE ALL THE HARD WORK YOU DO ,YOU HAVE AN AWESOME CHANNEL BROTHER VERY INFORMATIVE GREAT TIPS ,AND EXPLAINATIONS OF WHAT AND WHY YOUR DOING SPECIFIC MODIFICATIONS ,THANKS TINMAN ,LOVIN ALL THE VIDEOS ,TAKE HER EASY BUDDY BE SAFE MAN

Right on Tinman, keep us updated. Can't wait to see how it turns out!!

Don't look to bad at all, nice solid saw!

Hey Tinman!! Great video bud, and you’re right about tapping on the screw/bolt heads!! Out here in Ontario everything is rusted on cars so whatever you can do to prevent the bolts from breaking is a bonus!! Take care man!

good vid well done

Hey man. Nice way to begin a logging filled week. Enjoy your week can’t wait to be in the shop with you Friday night! See you then!!

@tinmanssaws

3 жыл бұрын

We'll be there before ya know it!!

Second...mac love🖤💛🖤💛🖤💛🖤💛

hey tinman,great vid! its a great community we are have here. i can learn a lot only by watching your channel, thanks for that, broh! where are you located?

@tinmanssaws

3 жыл бұрын

Hey Pilk I'm in Manitoba

@rockinp18

3 жыл бұрын

I have a McCulloch 710 that needs your attention I’m in Oklahoma United States have you had anyone from The us send you a saw or is that an issue

@tinmanssaws

3 жыл бұрын

@@rockinp18 I get saws from the states all the time, it takes a couple weeks but they get here

@rockinp18

3 жыл бұрын

You got a phone number I can call

Sometimes you get lucky and they don't need much , sometimes they need a lot. Enjoy it either way ! Thanks Tinman

hi great video. you can take and port that cylinder when you having it apart.

I was saying to my screen, there's a screw in the back of the handle. ...... Great content keep up the great work Tinman.

You should give BELLHOPPER MCCULLOUGH chainsaws a shout ,Jeremiah BELL he has lots of MAC parts

Seeing your video in my feed just put a huge smile on my face!! Much love Tinman!❤️ (stupid autocorrect said Tubman lol😂)

Now you have one of those 700 saws they're rippers

That’s a small exhaust port for sure. So......... just do it you know you wanna LOL!!!

Nice, more is better.

If you’re going to take it a part might as well port it why not 👍

And we're back with the Tinman!!!🤘

Great job with the videos Tinman !!! What's happening with that Poulan 5200,,,,I'm anxious to see that one ported,,,,

@tinmanssaws

3 жыл бұрын

Its on the list, I'm waiting for parts which seems to be the way it goes this year

I have to put a piston and jug on my XL-12 that I believe is 54cc. Can I get a set from the 58cc HOMELITE saws?

If you find a piston and rings will you let me know where you find it I need one myself

SAW DOES NOT LOOK TO BAD, SHOULD BE A RUNNER WITH SOME CLEANING

I’m in the Us and have a McCulloch 710 I would like to get ported is it feasible to get it to you? Or do you have someone to recommend

Hey brother I want to donate a saw to ur channel I've never seen this particular brand of saw on any of ur videos and would love to see what u can do with it

Tinman you rock. Please show us your tear down and what to do when/if you just want to clean exhaust port and piston. Check out Billy from philly on Instagram just tore down the XL12 found carbon buildup and slight scoring on the piston. Kindness and love 💪🏻⚡️🪓

Make it a cannet, the cylinder is lower - the exhaust is wider...

Ah, it was supposed to say hey tinman.

3rd I guess

How’s a fella get on the whatsapp

@tinmanssaws

Жыл бұрын

It's an app you can download