My gosh! What a great instruction video! I don't think I'm going to have to replace this part, but if I did, I, a novice, would feel perfectly safe and competent to do it. There are not many like you! Thank you!

Thank You, Your video helped with the replacement of my igniter, The oven your working on here is the same model I have. There was no need to cut and spice the wires there is an access panel in the back of the oven where you can access the wires for the igniter and a quick disconnect, Simply plug and play, Old to New.

Thank you ! fixed mine in less than an hour

Great instruction, not too much talking straight to the point and easy to follow! JUST AWESOME! THANKS for helping us amateurs!

@Appliancevideo

8 жыл бұрын

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZread channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

@ghosttradez2687

7 жыл бұрын

ApplianceVideo.com

Wonderful video and explanation, thank you!

Thanks! Fixed it! To the point!

Have watched a lot of videos on same topic. This is the best one. Thank you.

@Appliancevideo

3 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Thank you so much only video that showed me how to cut the wire instead of unplugging the whole.

@Appliancevideo

9 жыл бұрын

Morgan thomas Thanks for the positive comment. Hopefully we saved you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZread, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

@morganskye8773

9 жыл бұрын

It saved me hundreds of dollars. It took me maybe 45 mins all by myself and now my oven works like new! I'am so proud of myself. Thank you again

Great video, The screws on my bracket were stripped so I ended up using your trick of putting the new igniter in the old bracket cause there was just no way to remove the old bracket. Thanks a lot

@Appliancevideo

5 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Thank you for the video. I just replaced the igniter based on your guidance and it works perfectly now.

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Ceramic wire nuts? Taught me something right there. I didn't know they existed, thanks!

@Appliancevideo

8 жыл бұрын

+kpdiallo Thanks for your positive comment. We have helped millions of people repair their own appliances. Please help us produce more videos to our site by subscribing to our KZread page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account.

Good instructions; I followed them and it worked out perfectly. I did make one change however. I saved the braided insulation , slid it over the wires leading to the new igniter, thus having enhanced insulation from the igniter to the opening in the oven wall.

@Appliancevideo

7 жыл бұрын

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZread channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

Hi and thanks for the great video. I have the same oven and the ignitor was not glowing. I replaced it by an oem igniter but still not working. I measured the voltage coming to the igniter and was only 2 volt. I guess it should be about 110 volt. Can you please tell me what could be the problem? Thanks in advance

Thanks for the Video !!!! Mine had plastic connectors which was a plus. Tip! I started to remove igniter and screws were so tight and a little rusted that it was starting to bend the burner mount.I then put a couple of drops of Liguid Wrench penetrating oil on screws and let it soak for about an hour and then they came off very easy. ( Don't soak it as a couple of drops will do the trick) and make sure you clean the mount off before installing the new part as you definitely do not want any oil on the new element. In fact I used cotton gloves when handling new element just to make sure no oil touched it. Worked great and saved me a repair fee for a simple fix.

@Appliancevideo

8 жыл бұрын

Thank you for your positive response, we are glad we could help. Please subscribe to our KZread channel or donate a dollar to our fan funding page to help us create more quality content. This is the only way we can continue to help thousands of people like you every month. Just click on the link below and go to our KZread page and click on the BLUE support button on the right hand side of the page. Thanks in advance. kzread.info

Great instructions! It would of worked and was confident trying to fix my oven But broke the new ignitor trying to get it out of the bracket. Barely tapped it i guess.

I have had to do this a few times in my LG range. I believe if you hit the clean button or do some cooking on a very hot oven this will deteriorate this little glow stick breaking it down. So the more you cook at these high heats or set the oven on the clean cycle the more times this glow stick or igniter will have to be replaced

Andrew Nelson, The ignitor I bought had a quick connect on it. just pulled a little more wire and the original had one also.

@Appliancevideo

8 жыл бұрын

+Kyle Conrad Great, sounds like an easy repair for you. Please help us provide more videos to our site by subscribing to our KZread page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

@tiberio135

7 жыл бұрын

Is there any possible way to by-pass the igniter to turn oven on....such as with a long neck lighter???? I can not get the igniter for my stove. Please reply.

Thank your video, it helps me. There's upper igniter on the top of oven, I tested wire no electricity on both wire, I wonder just change bottom igniter is fine or I have to change both igniter, Thank you

Extremely helpful video! Thank-you!

@Appliancevideo

5 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

What about the old insulation wire? The new wire is exposed

great video, just to the point, thanks!

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Hey good video I been try to fix my samsung stove that's giving trouble to light I see the ignitor glowing but it won't light some time it works and then again it won't I just might look to change the ignitor and see if it helps but the valve is good did a continuity test and it was good

Good job. Easy Peasy. Thanks fer takin the time to present this. -PawPaw

@Appliancevideo

9 жыл бұрын

Dan Thank you for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZread, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

Great video sir thank you a lot I believe this is the problem I am having with my jenn-air

@Appliancevideo

5 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Thank you so much your video is very clear easy to follow.

@Appliancevideo

8 жыл бұрын

Thanks for your positive comment. We have helped millions of people repair their own appliances. Please help produce more quality videos so we can post them to our website by subscribing to our KZread page, or posting our website www.appliancevideo.com/ on your Facebook or Twitter account.

Perfecto! Thanks so MUCH!!!!!! Cost saver!!!!!

@Appliancevideo

8 жыл бұрын

+Christopher Ruben Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our KZread page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

This video was VERY helpful to me. THANK YOU!

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

awesome step by step instruction! Thank you so much

@Appliancevideo

7 жыл бұрын

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZread channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

@donaldoji6399

7 жыл бұрын

Yep. Just subscribed! Thanks.

Very well explained and demonstrated!

@Appliancevideo

10 жыл бұрын

Thank you for your positive comment . Our family-owned and operated company works hard to provide you with FREE, high-quality repair videos. Thank you for your continued support and good luck on your project. If you are in need of any parts, our parts department has over 5-million in stock for same day shipping. Please call 1-800-830-5465 for any of your parts needs, or you can order online 24 hours at: ApplianceVideo.com. Thank you and good luck with you project.

Well lucky me turkey day ignitor lights but lil flame, so that sounds like since the last time we used our stove, last year. I may swap the broiler ignitor to the bake first, it lights, off I go for a new ignitor.

I have a 2012 Whirlpool gas double oven range and the top oven will not start on bake, it seems to work fine on Broil. So, I am attempting to remove the igniter and have taken the two screws off the igniter and trying to remove it. I got it off but there is not electrical plug like on your video and others. Will I need to remove the back of the range and get to the plug from there?

Hi! But what if there is no power on the igniter and you can see it by voltage tester, is it means that the control board is out of order?

should the flame be on at all times or only when you hit bake? my flame is staying on

It IS necessary to put back the thermal insulation on the new wires!! Before connecting the wires slip the insulation on the new wires (and keep them longer!) the connetion betwen the old and new wires will have to be pushed back into the cavity.

@Appliancevideo

5 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

If you order the OEM Igniter you just pull the wires out to the connector, no splicing needed.

Video - 8, Audio - 9, and DemoExplanation - 10

@Appliancevideo

9 жыл бұрын

John Thanks for the positive comment. Hopefully we saved you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZread, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

Excellent video! I have a Whirlpool range, model #WGG555S0BS01. It started as not broiling or self-cleaning a little over a year ago. I changed the igniter (not an oem part) in December 2018, but it did not fix the problem, although it has heated properly until last night. Now, the upper oven is completely dead, with no signs of even trying to ignite or heat. The lower oven and all of the stove burners work perfectly. Does this sound like a bad igniter, yet again? I'm considering buying the OEM part this time in the hopes that this will fix the problem. Would you recommend the OEM igniter as the fix for my oven? Thanks!

@Appliancevideo

4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

Thanks for the video. I replaced it and now my oven works fine. I did notice mice had gotten into alot of the insulation so I can see right through the stove from the inside to the back panel. Can i use roxall to insulate it?

@Appliancevideo

3 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Where is the pilot? Do I have to relight the oven?

Matt, I could use some advice. I have a jennaire gas stove and the oven doesn't ignite. The broiler does but not the oven, so I put an OHM meter across the igniter it had connectivity but I ordered a new igniter anyway. The new one draws a lot less OHMs so I installed it as per your video. Fired it up and nothing. I checked the wire coming in and going out of the igniter and both wires have 120 volts when bake is selected so it's completing the circuit but the igniter won't glow. The oven defaults to 100 degs. I don't think I have two faulty igniters? I would really appreciate any advice. Brad

@Appliancevideo

6 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

This seems like such a silly thing to ask, but did you say you only have to unplug it but not shut the gas off? It seems like the gas should be shut off as well, but maybe I'm just being nervous? Thanks in advance!

@Appliancevideo

6 жыл бұрын

Hello, for technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you can search through FREE to help you with your problem. Hope this helps

What do you mean by 'plugged in?' do you mean to disconnect the gas valve or the electric connection?

@Appliancevideo

7 жыл бұрын

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.

@Mickthecat11

4 жыл бұрын

Electrical connection

@Cdray24

3 жыл бұрын

electricity

Wow, your video is the best of any other ones on here!! I have an old Tappan TGF362BBBA, and it has been acting up for a while now. The last few months when I would press Preheat, the oven would heat up, but it took about 45 minutes. Now the igniter is just glowing orange and not heating through the tube. The good thing is that the burners and broiler are working. Do you think the oven igniter just needs replaced? This oven has a dual gas safety valve, could it be that? I hope not, because it wouldn't be worth replacing! I tried using a multi-meter to check the gas safety valve, but I'm confused as to how to really check it. I can't pull my range out from the wall because it is way to heavy, and that's why I really like how you show to replace the igniter by doing it inside the oven! Any help you could give is very appreciated, thank you!!

@Appliancevideo

9 жыл бұрын

Rose Swiokla All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. If you are in need of any parts please support our parts department on line at @ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

Did you turn off the gas before doing the ignitor test?

@Appliancevideo

4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

@Mickthecat11

4 жыл бұрын

No. You wouldn't be able to test it if it lights the gas up then.

When oven does not maintain the temperature setting. Can this also be a faulty igniter?

@Appliancevideo

2 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

WHAT ABOUT IF YOU DO NOT EVEN SMELL GAS? The top burners work, but the broiler/oven does not. Even if the igniter is bad shouldn't you smell gas when turned on??

@martyphilipps1754

8 жыл бұрын

+Andrew Anselmo No, the oven has more safety measures as the oven goes on & off to maintain temperature. Older models with a gas pilot light had a thermostat near the pilot flame that controlled the valve. Electronic starters could use a thermostat or a sensor that monitors the current going through the igniter.

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

is it NOT necessary to put thermal insulation back over the new wiring?

@thetacobelcanon

8 жыл бұрын

I am wondering the exact same thing. The wires will have a little bit of insulation on them but it is not quite as heavy duty as what he cuts through.

@kyleconrad1983

8 жыл бұрын

Andrew the ignitor I bought had a quick connect on it. Luckily so did the original ignitor.

@JohnHardison315

7 жыл бұрын

Did anyone ever post an explanation to this? I am about to undertake this procedure and would like to avoid a bunch of melted wires.

@thetacobelcanon

7 жыл бұрын

John Hardison basically tried my best to cover those wires. Not perfect, but nothing has melted yet. After the igniter is installed there is very little of the wiring that is exposed to the oven side. Most is behind the range. If in doubt, fireproof insulation can be found at any hardware store. I realize this comes a couple months late. Hope it helps the next guy.

@josefdoesthings

4 жыл бұрын

Andrew Nelson you helped the next guy (me) hah

My ignitor works I just don't get gas. Any tips? The stove burners work great just not the oven

@Appliancevideo

4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

Silly question..but do you also disconnect the gas and or turn it off? Or just unplug it

@Appliancevideo

4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 6-days A week Monday -Saturday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

What about the fire sleeve protecting the wire ???

@Appliancevideo

6 жыл бұрын

Hello, for technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you can search through FREE to help you with your problem. Hope this helps

@danmaantaya1749

5 жыл бұрын

That was my question as well.

i have inglis ele. stove topele dont work properly comes on but wont stay on is it posible for it to be element

@Appliancevideo

6 жыл бұрын

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.

You said to not touch the heating element. Is it okay to touch the ceramic parts? Just wondering. Thanks, Edgar

@Appliancevideo

4 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

@Mickthecat11

4 жыл бұрын

No. The heating element is the ceramic parts. The two long greyish things that stick out of the end of ignitor . Don't touch with bare hands.

The oem ignitor has a plug on it, accessed by pulling the old one out just a little more I dont understand why the tech is doing it this way...I would only do it this way in a pinch. That's just me.

@Grampp12

8 жыл бұрын

No all ignitors have a plug (unfortunately)... like mine.... .... does not, so the only option is to use the ceramic wire nuts.

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

Put a bit of water on the screws prior to removal and they won't strip.

We have a Dacor older model gas/convection oven.The oven when I pressed convection,It preheats,I heard a WHOOSH sound right away.Scared me.When I opened the oven I saw a blue flame inside the oven . The igniter had been replaced ,months ago.The oven door handle fell off,the light NEVER WORKED.A appliance guy to replace the motor board,a while back,we did'nt.This Dacor oven is DISCONTINUED.What makes the oven do that,is there a chance it may blow up?I use the gas top of the oven to cook,I refuse to turn the oven on/or use it.Is there DANGER?

@Appliancevideo

4 жыл бұрын

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZread channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

I changed the igniter with a new one and the oven still does not work what possible things can I do?

@Appliancevideo

9 жыл бұрын

De Witt All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at www.appliancevideo.com/premium-membership/. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

does it matter which wire goes to which wire since there is 2??? like green to green etc.

@Appliancevideo

5 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

@Mickthecat11

4 жыл бұрын

No. It says that in the video. Because its just a big circle or circuit

Why is it that The ceramic wire nut can be touched with your hand whereas the element being made from ceramic should not be touched?....wouldn't the oil from our skin create a hot spot as well?

@Appliancevideo

6 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

Maytag oven igniters fix

What if the igniter works lights up but the burner doesnt turn on could it be clogged

@Appliancevideo

6 жыл бұрын

Hello, for technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you can search through FREE to help you with your problem. Hope this helps

@mikecastillo5941

5 жыл бұрын

Look above I just answered it

@Cdray24

3 жыл бұрын

yes. this happened to me when cleaning my oven just take a pin and clean it out and it will be unclogged, i had to wait two days for the water to dry.

sir. how about if the igniter is working but it the tube thing doesn't make fire? help please.

@Appliancevideo

9 жыл бұрын

Jerk Ric All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section with over 1000 questions & answers. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at www.appliancevideo.com/premium-membership/. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

@KurtArmbruster77

9 жыл бұрын

+Jerk Ric I had this problem as well: Igniter would click and spark and even glow blue for a moment, but the gas tube wouldn't light. The problem was there was too much air blowing and the flame wouldn't light. The solution (for mine) was to adjust the air intake at the back (where the gas enters the compartment and then goes to the broiler tube.) I loosened the small screw and rotated the collar to close the opening and reduce the air (but not gas flow). It was a little stuck at first (backed grease and crud) so you may need to clean it to take apart. It fixed everything like a charm. Happy Broiling !!

@grantmatus6682

7 жыл бұрын

Yes the hot surface ignitor is still likely at fault. As they age the resistance increases which eventually prevents the solenoid opening and letting gas flow.

What about the top burner

@Appliancevideo

6 жыл бұрын

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000 common questions and answers that you can easily search through by your model number, appliance make, problem or error codes, and It’s completely free to search through our question & answer library. There is a very good chance you question is already answered there.

An even better way to avoid this problem is to not buy Maytag at all. Its the largest POS I have ever had the displeasure of cooking on - ridiculous.

@Appliancevideo

3 жыл бұрын

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .