Thank you Michael. This video showed me exactly where to turn and find the blockage myself.

Thank you. I just pulled out a rock the size of a quarter & it’s draining again! You saved me money!!!

@DIYwithMichaelBorders

4 жыл бұрын

Kari Tacoma Very cool & that’s great to hear. We appreciate you reaching out to us Kari. Us fellow DIY’ers need to stick! 😎👍🔧🔩

Mine was a piece of cloth inside the white part where the hose connects. I had to stick my finger in there and pull it out. Thanks again, you're a money saver

@DIYwithMichaelBorders

2 жыл бұрын

You are very welcome & a cloth will definitely do it. 😲 Hopefully many stress free days ahead for you.

This same thing has been intermittent for 4 yrs and much internet searching for many opinions, but this was IT!!!! Put door entry carpet in it to be washed and it formed a wad in the drain hose. I had to move the washer outside with a dolly due to water in it and NOT going to remove the drain hose inside. Removed it and the bivalve opened and out came all the water. Put the drain hose back on and connected a garden hose to the cold water input and ran a short cycle to open the door and find it full again?? Then I removed the drain hose again tried to run water from the garden hose through the drain hose and it was so plugged. Rammed some tubing in it and hosed it again and blew out the wad. YEAH!!!! COST?? ZERO!!!! Thanks

@DIYwithMichaelBorders

2 жыл бұрын

Bruce, we appreciate you watching & sharing this. Awesome job getting your washer cleared out & back up and running. Not a bad idea using a dolly to take machine outside to drain water, water pouring all over the inside floor is never good. Let us know if you have any questions, us DIY’ers need to stick. Hopefully many stress free days ahead for you. 😎👍

Thank you man! Was looking at calling someone out to fix it, looked up some stuff first, as I really couldn't afford that. Your video Helped perfectly

@DIYwithMichaelBorders

2 жыл бұрын

So happy to help & we appreciate you watching & sharing this. Us DIY’ers need to stick. Hopefully many stress free days ahead for you. 😎👍

Found a guitar pick in mine, go figure. It was gumming up the works and caused quite a blockage. We thought we needed to replace our washer when all we had to do was remove the back panel and remove the hose from the pump. The check valve was blocked open with the pick and a clump of hair et al. Our washer also wouldn't drain all the way, left clothes wet and would sometimes come up with an error message. All better now!

@DIYwithMichaelBorders

2 жыл бұрын

Thanks for watching welcome to the DIY Raptor Club. Isn’t that wild, something as little as a guitar pick can cause a machine altering issue...😳 We appreciate you sharing this and it’s great to hear you’re back up and running. Hopefully many stress free days ahead for you. Thanks for watching Aaron. 😎👍🔧🔩

What if the obstruction is in the pump, or between the pump and the drum, instead of in the drain hose downstream of the pump? It would be nice to know how to diagnose whether the problem causing the water not to drain is a clog or a broken pump BEFORE taking anything apart, such as by the sound it makes during the drain cycle, and/or whether there's no flow or a little flow when it's supposed to be draining..

Thank you Very much. Happy New Year!

@DIYwithMichaelBorders

7 ай бұрын

You are welcome, thank YOU! Many more helpful videos to come. 🧰

Excellent explanation and video. Super! Thanks!

@DIYwithMichaelBorders

3 жыл бұрын

You are very welcome & we appreciate you sharing this. Welcome to the DIY Raptor Club. Many more helpful videos to come. Hope all is well. 😎👍🔧🔩

Loved the looping video 2:22

@DIYwithMichaelBorders

3 жыл бұрын

Thanks for watching & we appreciate you reaching out to us. Are you back up & running? Let us know if you have any questions. 😎👍🔧🔩

I hooked up a shop vac to the hose and sucked the water out. Worked pretty slick. That also was not my problem. I am hoping it is just the pump. Seems easy enough to replace

@DIYwithMichaelBorders

3 жыл бұрын

Thanks for watching. Keep us posted. 😎👍

If the hose is clear, I can feel the water flowing through it but the drum isn't rotating as quickly as it was what do I do?

excellent

@DIYwithMichaelBorders

Жыл бұрын

Thank you. 😁👍

I have the same washer and it won't wash at all. A week or so ago the door locked after a wash and it stop washing since, please advise, thank you.

@DIYwithMichaelBorders

2 жыл бұрын

Thanks for watching & welcome to the DIY Raptor Club. You may need to perform a system reset by unplugging unit for a minimum of 5 minutes. Keep us posted, us DIY’ers need to stick together. 😎👍

@michaelcuypers1012

Жыл бұрын

There is a fuse in your wiring if you take off the metal piece on the back of your control center you will find a large paper with all the wiring diagrams and trouble shooting patterns to follow that should make it easy to figure out the problem.

Thanks!

@DIYwithMichaelBorders

Жыл бұрын

Hi Stephanie, you are welcome. Thank you!!!! 😎👍

Mine is a different model, I'm guessing older, has a solid square door, No window, is it the same procedure?

@DIYwithMichaelBorders

4 жыл бұрын

Chris Soup Thanks for watching & we hope you enjoyed the video. It should be extremely similar as most machines are laid out the same. Definitely keep us posted on your project. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZread notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

Damn thourough. Thanks

@DIYwithMichaelBorders

4 жыл бұрын

Adam French Thanks for watching Adam & we are happy the video helped. Keep us posted on your project. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZread notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

Thanks.

@DIYwithMichaelBorders

Жыл бұрын

Good morning, you are very welcome. Thanks for watching. 👍

Can u please help? My Maytag washer runs but won’t complete rinse an spin..?

@DIYwithMichaelBorders

2 жыл бұрын

Good morning & welcome to the DIY Raptor Club. By chance is your machine displaying an error code on the panel?

@Adem19811

2 жыл бұрын

@@DIYwithMichaelBorders no codes ! 😏

@DIYwithMichaelBorders

2 жыл бұрын

@@Adem19811 Interesting, you may need to perform a full system reset. Below are links to two different reset procedures. kzread.info/dash/bejne/Z3aZppKMeKzaZbQ.html kzread.info/dash/bejne/om2G2dKDaMfcp5s.html 😎👍🔧🔩

@Adem19811

2 жыл бұрын

@@DIYwithMichaelBorders thanks! I’ll try today and keep u posted..👍🏻

@Adem19811

2 жыл бұрын

@@DIYwithMichaelBorders still not working! Any other suggestions?

Thanks for the video, it didn't work for me. I ordered a new part, thinking it may be something else.

@DIYwithMichaelBorders

4 жыл бұрын

Connie Fields Thanks for watching & we hope the video helped. Let us know if you have any questions. Hopefully we can get that washer back up & running properly. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZread notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

@ckfields7146

4 жыл бұрын

It was the computer panel.

@DIYwithMichaelBorders

4 жыл бұрын

Connie Fields Thanks for sharing your update Connie. We really appreciate it. Sounds like you’re back up & running. Definitely let us know if you have any additional questions along the way, we are always here to help! 😎👍🔧🔩

I have the exact same washer but it is an inglis w10178029

@DIYwithMichaelBorders

2 жыл бұрын

Very cool, we appreciate you watching. Let us know if you have any questions, us DIY’ers need to stick together! 😎👍