MaxxAir Fan Installation | Ram ProMaster Van Build Series | Van Life | Solo Female Traveler

Well, I did it! I cut two holes in the roof of my brand new van to install my MaxxAir fans with and without a fan adapter. I hope this video provides valuable information for you to do your own fan install.
Tune in for my next video where I will be installing two bunk Motion Windows in the rear of my van - which means two cutting two more large holes into my van!
Until then, be sure to subscribe to my channel and turn on notifications so you don't miss a beat.
For more frequent van life updates, connect and interact with me on Instagram and Tik Tok @LaurenLawliss.
Instagram: / laurenlawliss
Tik Tok: / laurenlawliss
Thank you for your support - Venmo: www.venmo.com/u/LaurenLawliss
In the comments below, tell me what part of this install process you would be most excited to do! I know I loved making that first cut and knowing there was no going back now.
Thank you for being here :)
LINKS TO PRODUCTS AND TOOLS BELOW!
Timecodes:
0:00 - Intro
0:27 - Why I am installing MaxxAir roof fans
2:16 - Product and Tools
4:33 - Determining fan locations
5:08 - Installation of the front fan with no adapter
8:34 - Making a wooden frame
9:51 - Installation of the rear fan with an adapter
12:32 - Continuation of the front fan
15:10 - Final installation steps
16:29 - Closing
Affiliate Links for Products and Tools:
MaxxAir Roof Fans: amzn.to/3y6mUNy
Dicor Self-Leveling Lap Sealant: amzn.to/3n5IpYp
Butyl Tape: amzn.to/3zY8BMt
3M Window Weld: amzn.to/3n5a1wR
Rust-Oleum Primer: amzn.to/39CVW6R
Rust-Oleum Protective Enamel: amzn.to/3N7Qu9B
Painter's Tape: amzn.to/3nolrMx
Liquid Nails: amzn.to/3n7hxHG
Bosch T118B Metal Jigsaw Blades: amzn.to/3y9TkH5
Metal File: amzn.to/3HGH2ZM
Scour Pads: amzn.to/3tQ8jmP
Bosch Jigsaw: amzn.to/3Oy5Khh
Foam Brushes: amzn.to/3O9WBvj
Kreg Jig Set: amzn.to/3NaPcLd
Dewalt Cordless Drill Combo Kit: amzn.to/39Gd0Zv
Expo Markers: amzn.to/3be1BR6
Caulking Gun: amzn.to/3HJ8gyI
Clamps: amzn.to/3tRTiRk
Safety Glasses: amzn.to/3OaEfKV
Micro Fiber Cloths: amzn.to/3QN225k
6-Foot Ladder: amzn.to/3n7Zwc0
Broom and Dust Pan: amzn.to/39KHREs
Shop Vac: amzn.to/3y8A64l
Magnet Sticks: amzn.to/3y336cP
Knee Pads: amzn.to/3yahJMk
Fan Adapter: www.ebay.com/itm/Promaster-Ro...
Disclaimer:
I am not a professional. This information is what I have gathered from my own research on the topic and is only intended for reference. Further research should be conducted for your specific project based on your needs. Please note, not everything you see online is the correct or the only way to do something. Contact a professional if in doubt. Following an incorrect procedure could lead to a dangerous and ineffective result.

Пікірлер: 119

  • @bmart73
    @bmart737 күн бұрын

    i like the box taped underneath to catch rubbish idea.

  • @theresamartin5170
    @theresamartin517010 ай бұрын

    Fan install ASMR...hilarious. I've been watching dozens of how to videos. I now realize you are all that I need, from start to finish. This will save me, and others, a tremendous amount of time and wasted effort. Thank you. YOU ARE AMAZING

  • @LaurenLawliss

    @LaurenLawliss

    10 ай бұрын

    Wow, this comment means so much! Thank you❤️

  • @bergfpv6486
    @bergfpv6486Ай бұрын

    I love how detailed and meticulous you are. I'm at the very beginning of my build, before the beginning, really. Doing some tlc on the truck first. I will be watching your videos frequently because of how useful they are. Great work.

  • @LaurenLawliss

    @LaurenLawliss

    Ай бұрын

    I’m glad you are finding the videos helpful. Good luck on your conversion!

  • @rickeydenler2385
    @rickeydenler2385 Жыл бұрын

    Your my kind of woman adventurous and willing to teach yourself and install your own fans and windows cant wait to see your build I am a 40 plus year woodworker and i have been pretty impressed with some of the amateur builds I have seen you tube is a wonderful teacher.

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Yes, thankfully the internet is full of valuable information!

  • @robertwagner8596

    @robertwagner8596

    Жыл бұрын

    shes awesome isnt she...

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Thank you🥰🥰

  • @bogdanp5614
    @bogdanp5614Ай бұрын

    YOU ARE AMAZING !!!

  • @LaurenLawliss

    @LaurenLawliss

    Ай бұрын

    THANK YOU💖

  • @lauraanderson7092
    @lauraanderson7092 Жыл бұрын

    I appreciate how detailed and thorough your explanations are. From the table with all of your supplies laid out ahead of time, down to explaining what you are about to do and why. Thank you for sharing!

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thanks Laura! Glad you found it helpful🥰

  • @josephj7991
    @josephj79912 жыл бұрын

    Great tip for using box to catch metal shavings! I will do that!

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    It was a lifesaver!

  • @MrDwinstead
    @MrDwinstead2 жыл бұрын

    Your videos are so professional and informative. Feels like I am watching someone who does this regularly. Great job! Thanks for your efforts.

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thank you for your kind words!

  • @cidpusa700
    @cidpusa7002 жыл бұрын

    What a great professional installation, made it look easy. Looking forward to replicating what you did. Awesome and impressive.

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Thank you for your kind words!

  • @akram4li
    @akram4li Жыл бұрын

  • @Ms.Frankenbuilder
    @Ms.FrankenbuilderАй бұрын

    Great job.

  • @LaurenLawliss

    @LaurenLawliss

    Ай бұрын

    Appreciate it!

  • @strunk_adventures9750
    @strunk_adventures97504 ай бұрын

    great job. another great video

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Appreciate it☺️

  • @jpdemont
    @jpdemont Жыл бұрын

    Your attitude is excellent Lauren, and I'm very impressed with your attention to detail and your ability to reason through everything. 😊

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thank you for the kind words☺️❤️

  • @williekessel9364
    @williekessel93642 ай бұрын

    been watching all the videos in preperation for my build. thank you for being hyper detailed and providing all of the product links.

  • @LaurenLawliss

    @LaurenLawliss

    2 ай бұрын

    Thanks for watching and commenting! Best of luck on your build🙌🏻

  • @MichaelSteighner
    @MichaelSteighner2 жыл бұрын

    What a nice road map you are creating! Great video :-)

  • @davidperez7260
    @davidperez72602 жыл бұрын

    WOW AMAZING YOUR DAD MUST BE PROUD

  • @davep6977
    @davep69778 ай бұрын

    I do a lot of meter work. A magnet is a great idea. But what do you do with all that metal flakes and dust stuck on your magnet? Wrap your magnet with a paper towel before collecting the metal debris. Then hold it over your trash can as you unwrap the paper towel from the magnet. A rubber band works

  • @LaurenLawliss

    @LaurenLawliss

    8 ай бұрын

    Yes, as I shared, a magnet would be perfect and I recommend putting a ziploc bag around it before use so once you are done you can flip the bag inside out and trap all the natal flakes for disposal😄

  • @jessyr2197
    @jessyr21975 ай бұрын

    So glad I found this channel!

  • @LaurenLawliss

    @LaurenLawliss

    5 ай бұрын

    Welcome to the channel!!

  • @davidvincent2nd757
    @davidvincent2nd7572 жыл бұрын

    Well Maxair should definitely recommend this video to there customers . Your fabulous at explaining while not worrying about the camera . You don’t fumble a single word . I assume you’ll cut the screws off when you do the ceiling . But maybe you’re dropping your ceiling down a little . I’m positive there was no leaks as it looked like the best sealed fan on KZread .

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Really appreciate that! Means so much😊

  • @user-kf9fv1qj9u
    @user-kf9fv1qj9u4 ай бұрын

    Great video Lauren

  • @LaurenLawliss

    @LaurenLawliss

    4 ай бұрын

    Thanks

  • @mysteriomarvel933
    @mysteriomarvel9339 ай бұрын

    Very well done..your attention to detail is excellent. You are teaching me how to do this for myself one day and I thank you for that.

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Thank you! I am glad you found it helpful🤩

  • @lawrencedavidson6195
    @lawrencedavidson61954 ай бұрын

    Very well done! I learnt everything i needed to know from this video. Greetings from Jamaica.

  • @LaurenLawliss

    @LaurenLawliss

    4 ай бұрын

    Glad you found it helpful!!

  • @rickdean2141
    @rickdean21412 жыл бұрын

    Amazing attention to detail

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Thank you☺️

  • @TheShadowVortX
    @TheShadowVortX Жыл бұрын

    Awesome, brilliant, concise, easy to follow, full of details. Thanks for this tutorial. I'm right behind you on my Ducato (= ProMaster) conversation, and it's quite useful to have such a visual assurance of what I'm doing! Much appreciated!

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thanks so much for watching! I am glad you found it helpful🥰

  • @Van-life-4-Jesus
    @Van-life-4-Jesus3 ай бұрын

    Lauren you're phenomenal ❤

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Thank you!

  • @taililly2483
    @taililly24839 ай бұрын

    You are so good for one so young. You would make a great teacher.

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Thank you for the kind words. It means a lot🥰

  • @guatpoiteo7125
    @guatpoiteo71256 ай бұрын

    Awesome

  • @LaurenLawliss

    @LaurenLawliss

    6 ай бұрын

    Appreciate it!

  • @hanialjehani5502
    @hanialjehani55024 ай бұрын

    you are creative

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Thank you!!

  • @jorislandries5642
    @jorislandries564210 ай бұрын

    Very good video

  • @LaurenLawliss

    @LaurenLawliss

    10 ай бұрын

    Appreciate it!

  • @garyjohnson8622
    @garyjohnson86222 жыл бұрын

    I love what you are doing and the way you are showing it. I wouldn't be surprised if shortly, your viewers and subscribers skyrocketed.

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Appreciate that☺️

  • @r.foshee1578
    @r.foshee157811 ай бұрын

    Vanning girls are awesome!!

  • @LaurenLawliss

    @LaurenLawliss

    11 ай бұрын

    Heck yeah😆

  • @ahmedabakar5166
    @ahmedabakar51662 жыл бұрын

    U awesome.. from Sudan Africa 🌍💞

  • @themetalmaiden7462
    @themetalmaiden74622 жыл бұрын

    Excellent. LOVE that inside box idea. And yes......I'm gonna steal that idea for myself to use ;)

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Thanks! The box was a lifesaver. I am so paranoid about rust so catching those metal shavings was very reassuring! Good luck with your install😁

  • @themetalmaiden7462

    @themetalmaiden7462

    2 жыл бұрын

    @@LaurenLawliss Yeah, it saved you all of the mess from the metal shavings getting tossed everywhere by the jig saw. I'm still researching which vehicle I'm going to finally decide on, but the list narrows down everyday. Getting other peoples ideas from their experiences will certainly save me a lot of time and pain :) I worked in aircraft maintenance for years so I'm sure I can use things from that to help as well. Keep going, you're doing a great job!

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    @@themetalmaiden7462 Let me know which make and model you choose! All of them have their own pros and cons. Excited for you to begin this journey!

  • @themetalmaiden7462

    @themetalmaiden7462

    2 жыл бұрын

    @@LaurenLawliss They sure do, and that's what makes it interesting :) I've had several journey's in my life but I'm really excited to start the next one. Watching videos like yours just make me that much more excited to get on with it. The freedom that you all are enjoying is contagious.

  • @katekaos
    @katekaos Жыл бұрын

    Legit the best video I’ve seen for installing these. I’m still debating if I want to attempt it or not. But very well shot and informative!

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thank you so much for the comment. Personally I say go for it! Take your time, plan ahead, measure twice and cut once and trust yourself. It is so empowering. I know you can do it🥰

  • @katekaos

    @katekaos

    Жыл бұрын

    @@LaurenLawliss I need the tools and a work space if I do. I don’t even have a driveway right now. 😭 debating the adapter and the wood frame is what’s throwing me off a bit

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Where there’s a will, there’s a way😉 Hope all is well🥰

  • @shevy5000
    @shevy50002 ай бұрын

    Great vid! At 15:16 you mention the white-headed screws are for attaching the fan to the receiving flange, but the manual I have states that they are actually for attaching the garnish inside the van..probably so they match the garnish inside the van where they'll be seen Just thought I'd mention for others. Thank you for the vid, it's helping me with my install process :)

  • @LaurenLawliss

    @LaurenLawliss

    2 ай бұрын

    Thanks for sharing! That would make more sense 🥹

  • @milenas3797
    @milenas3797 Жыл бұрын

    Awesome, well done, truly informative videos, Lauren! Sorry if I missed it but why did you use the fan adapter on one fan and not the other?? I'm on the fence on the pros/cons to using the adapter. Thanks!!!

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thank you Milena! The adapter helps the fan to sit flush to the roof ribs. You only need this if you mount the fan anywhere that isn’t in the front on the flat surface. It is great at helping to prevent leaks too because it is more sealed with the uneven surface of the roof. Hope this helps! Best of luck☺️

  • @Van-life-4-Jesus
    @Van-life-4-Jesus3 ай бұрын

    Im buying my van as we speak ive waited since 2016.... and im just as scared as i was then 😂😂😂😢😅

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Congrats! That is very exciting😄

  • @JJsAttic
    @JJsAttic2 жыл бұрын

    Omg solar panels seem intimidating I can't wait to learn how you install them

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Hahaha I thought so at first too but it’s not as scary as it seems😆 thanks!

  • @scottbilyeu1296
    @scottbilyeu12967 күн бұрын

    The one in the front you didnt use the adapter? Do you use the window weld or the butyl tape on the bottom of the flange to attach it to the roof?

  • @grayandgrumpy
    @grayandgrumpy2 жыл бұрын

    Comments, yeah! Does the fan adapter suggest using adhesive over butyl tape to seal against the van roof? Thanks.

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Hey there! The instructions that came with the fan does recommend butyl for the adapter install to the van roof. It is super easy to use and performs great. Highly recommend this for the install☺️

  • @rsatournm9185
    @rsatournm91852 ай бұрын

    Heel goed

  • @LaurenLawliss

    @LaurenLawliss

    2 ай бұрын

    Thank you!

  • @robertbirch4163
    @robertbirch41632 жыл бұрын

    OKAY, How through are you, wow totally impressed. Looking forward for the complete build. Curious what is it you do for a J O B. You have really done your homework. Great work.

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    I have a fully remote 40 hours a week job. So I have a guaranteed source of income while living on the road. Appreciate your kind words!🥰

  • @alaskalogcabinyoga7050
    @alaskalogcabinyoga70504 ай бұрын

    Are you glad you installed two fans? We have planned one in front with sliding bunk windows in back and are wondering if that is enough.

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Yes, I like having both fans so one can pull air out and the other can pull air in. But you can certainly do one if you need the roof space😊

  • @fernwehchronicles193
    @fernwehchronicles1939 ай бұрын

    You only use the eBay gasket on the back and you did not use one on the front is that correct? I know the front has some grooves, but it doesn’t have the channels like the back does…

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Correct! You only need the gasket if you install the fan anywhere else but in the front where that flat spot is☺️

  • @sheilamcwhorter2961
    @sheilamcwhorter29614 ай бұрын

    Hi Lauren I wanted to ask you, now that you are living in your van full time, do you wish you would have installed an air conditioner or do you find that the 2 fans are adequate for keeping you and the van cool?

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    Hey! Fair question. An AC would be nice, but I don’t have any experience with one in the van so I cannot say definitely. Personally, I don’t mind the heat and I try to move with the weather. Having two fans and venting windows certainly helps. So it is manageable but won’t be nearly as comfortable as living in a house with AC. I don’t want to favor one option over the other because it really comes down to personal preference and the trade offs made to go with either or. There are pros and cons to both.

  • @grayeagleswolves
    @grayeagleswolves2 жыл бұрын

    Hi Lauren what a great video I have to ask are you going to do Spray foam for your insolation

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    Thanks! No, I will be using 3M Thinsulate sml600 insulation🤩

  • @grayeagleswolves

    @grayeagleswolves

    2 жыл бұрын

    @@LaurenLawliss Form board ?

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    @@grayeagleswolves I was planning on using foam board for the floor, but am still undecided. Researching that more as we speak! The Thinsulate is not foam board.

  • @grayeagleswolves

    @grayeagleswolves

    2 жыл бұрын

    @@LaurenLawliss I'd Like to suggest a person who I follow and he's got a good way to do the van its Van city Van life Chrome Valdez on KZread he tells exactly why he did his van and the reason's why he went with what he did let me know what you think

  • @LaurenLawliss

    @LaurenLawliss

    2 жыл бұрын

    @@grayeagleswolves Great! I will check him out. Thanks for the recommendation!

  • @Van-life-4-Jesus
    @Van-life-4-Jesus3 ай бұрын

    But i Hate being hott so im going with an ac above my head 2 300 watt panels so when its 100 degrees ill run my ac off my solar alone than w fan in the front 🎉

  • @LaurenLawliss

    @LaurenLawliss

    2 ай бұрын

    Sounds refreshing!

  • @andreasmoll_0924
    @andreasmoll_09249 ай бұрын

    Maybe soon the maxxfan need a dc-dc buck converter to hold 12v constantly

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Not sure I understand the comment. The MaxxAir fans are 12v and pull very little power so it is very efficient. I have ran them for over 12 hours numerous times and it doesn’t drain the batteries at all.

  • @andreasmoll_0924

    @andreasmoll_0924

    9 ай бұрын

    @@LaurenLawliss Because of rhe current fluctuations sometimes 11,8v then 12,6v or 12,4v. Maxxfan works only fine, with exactly 12v or better 13v

  • @laanatomista3962
    @laanatomista3962 Жыл бұрын

    One question.. how did you trim the 3rd part of the fan? I'm half way through installation and just noticed the height. Thank you!

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Great question! I have not gotten to that part of the install yet as that will go on after my ceiling. I’d assume a hand saw would work - like one you’d use to cut PVC plumbing tubes. Make a mark around the entire square so you have reference when you are cutting. Since I have not done this yet this is all based on an assumption. I hope it works if you decide to go this way. Let me know😊

  • @laanatomista3962

    @laanatomista3962

    Жыл бұрын

    Oh, you're so right! Thank you, Lawren 🤘

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    @@laanatomista3962 Also had another thought…Maybe a Dremel/grinder will be quicker, easier and give a cleaner cut.

  • @katjacobs9056
    @katjacobs90563 ай бұрын

    Where do you get the Roof Adapter at???

  • @LaurenLawliss

    @LaurenLawliss

    3 ай бұрын

    I purchased it on eBay! Should be linked in the description.

  • @javiersalas8758
    @javiersalas87582 ай бұрын

    Did you forget to put the black fan adapter back on?

  • @LaurenLawliss

    @LaurenLawliss

    2 ай бұрын

    I’m not sure what you are referring to 🤔 but I am certain I didn’t forget anything 😆

  • @bj231bj
    @bj231bj Жыл бұрын

    Hello Laura , I am thinking to buy a Promaster but I hear that the insurance is expensive for cargo van. May you make a video about your insurance experience?

  • @LaurenLawliss

    @LaurenLawliss

    Жыл бұрын

    Thank you for your comment! Insurance will vary state by state and company by company. Personally, my van insurance is around the same as my car insurance (which isn't much). Also, after the conversion is complete, I will be titling and insuring the van as an RV which I have heard from many will drop the insurance cost. Hope this helps!

  • @bj231bj

    @bj231bj

    Жыл бұрын

    @@LaurenLawliss Yes help me a lot thanks. Do we have to have a comercial plates or we can finance the van as a personal loan?

  • @LaurenLawliss

    @LaurenLawliss

    9 ай бұрын

    Great question! These vehicles can be on a personal loan and personal insurance. No commercial needed - but it may vary state to state.

  • @GustavoDCarro
    @GustavoDCarro10 ай бұрын

    I have general English knowledge. Not technical. How u present your projects Allow me to have a deeper understanding. If I have any problems understanding I use the cc in the video. + links. And questions from people. In the comments. This way you help people that have limitations of any kind

  • @LaurenLawliss

    @LaurenLawliss

    10 ай бұрын

    I am so glad to hear that! Thanks for the comment❤️

Келесі