Great tip on the top sealer. Thanks, Sedge!

@sedgetool

9 ай бұрын

You bet!

I love the power locks, I have a small metalworking vice screwed to a piece of plywood with 20mm holes, so I can drop it anywhere on the bench and secure it with power locks.

@sedgetool

Жыл бұрын

wicked cool

Hey , shoot I need to go into my shop ......... whew Sedge I thought you raided my shop . I own all of those items and each one is indispensable !! I love every item they work wonderfully on my home built MFT via the UJK parf guide . Love the videos. I love festool live on Fridays as well . Have a wonderful day and thank you for the infectious energy you bring ..

@sedgetool

Жыл бұрын

cool... I wish I had started using the TSO and UJK accessories earlier .... especially the TDS13 stops

thank you so much sedge for your work, I'm from Brazil and a big fan of yours, always connected to your festool lives, I really admire your knowledge! health!!! as for the ujk hole reamer it is excellent it was developed by peter parfitt a joiner from the united kingdom passionate about joinery just like us.

@sedgetool

Жыл бұрын

Thanks...I have always enjoyed Peter's knowledge and videos..one of my favorite channels...

@marcosbatista6227

Жыл бұрын

​@@sedgetoolMine too ❤ thank you dear !!!!

Definitely getting that TSO refined 13 stop! I got the MTR-X from them & that is next. I had to send back my Whiteside undersized bits, they were a bit rusty and when I called Whiteside they said even though I picked the seller, Amazon just picks from a pile of all sellers so send them back & buy direct from a seller instead! So I have to get them again, more-direct.

@sedgetool

Жыл бұрын

the TDS13 stops are sooooo worth it !!!

4:03 awesome! I noticed the nail holes in rim of quart….I was taught that trick 30 years ago from an older shop foreman….

@sedgetool

11 ай бұрын

Right on !!!!! My Dad taught me that when I was a kid !!! too cool

@bartholomewgreatpants3425

3 ай бұрын

I had a buddy that did that with a 5 in 1 scraper and I was cleaning out the can to use for cut in and didnt realize he did that. I ended up nearly cutting off the tip of my finger. Blood everywhere, customer was cool about it but concerned.

UJK and TSO have a lot of bench dog items for the MFT. BenchDog from the UK has some really cool fences as well.

@sedgetool

11 ай бұрын

Cool !! Thanks

I do 50/50 mix of wipe on poly and mineral spirits. It dries so fast that you can do an application every hour. I apply the first 3 coats and sand up through the grits to 220. Then I apply 4-8 more coats. I let that cure for 24 hours. I then apply a coat of paste wax and buff off. I use the UJK bit to clear everything out afterwards. It tends to last 2 years and I've seen zero droop in the top because that finish is so hard that it keeps it from flexing. Reapplication is easy. I sand it back to 100 grit and start over when it finally wears out.

@sedgetool

Жыл бұрын

ok

Hey @Sedge wicked video as usual. Where is the link for those non-marring low profile dogs? Maybe is just my inability, but couldn't find it on the description. Thank you for all you do,

@sedgetool

3 ай бұрын

tsoproducts.com/bench-dogs/ujk-parf-dogs/ujk-anti-slip-workbench-protection-dogs/?ref=cwmk4ofe

great video sedge!

@sedgetool

11 ай бұрын

Thanks Eric !!!

@sedgetool I'd love you to review the UJK HDF Valchromat replacement top for the MFT sold by Axminster. I've heard real good things, but you have the most MFT experience.

@sedgetool

Жыл бұрын

Hmmmmmmmm

I picked up a 2x2 from Home Cheapo for my straight edge

@sedgetool

Жыл бұрын

😬😬😬

Hi Sedge, is it important to check the awareness of the MFT saw system? Thanks.

@sedgetool

Жыл бұрын

you just don't want a lot of bow if it is critical for your work for the workbench to be perfectly flat .....

Sedge, I was thinking (Run for the hills🤣) about gluing Formica to my MFT's top. I have some leftover from a desk I made for a friend's daughters during the pandemic as an "Ikea" clone as none where available and she was dead set on a specific design/look. I use a small piece of it on my MFT from time to time to protect it as I work, and then I thought it might be better if it was just permanently laminated/glued to the top. I realize it would be a bit of work re-drilling all the holes, and I would be using UJK's tools like you demonstrated, as I have already bought into their system. I was also wondering how the chamfer tool would work on formica, I would have to do a test on some scrap first to make sure. What are your thoughts Sedge? All the Best, Chuck.

@sedgetool

11 ай бұрын

Chuck...I personally would not go through all that effort...I cut into my MFT/3 occasionally as I cross cut...

@toolchuck

11 ай бұрын

@@sedgetool Yeah, it would be hard to clamp down to being it is rather slick too. But it would look nice and clean, until I cut it all up. 🤪 I'll try your seal coat method, thanks. All the Best, Chuck.

Sedge- "Somebody" did the #1 NO NO and didn't check the depth on the TS55 cordless track saw and went through the MDF-only about a few inches then realized my mistake. Can I put painters tape underneath and fill the hole with epoxy halfway? Is there any trick/video to just flipping the table and starting fresh from the other side? If I only walked on water :-) Really enjoy your tips- They DO help. From Inferno Texas

@sedgetool

11 ай бұрын

I know several folks that did exactly that and poured epoxy in the cut to fill the void ... make sure you use a tape that sticks really well....

Do you think it would be beneficial to seal both sides? I’m thinking maybe it would be less prone to cupping?

@sedgetool

11 ай бұрын

it could be..I never have and have never had a cupping issue due to not sealing the bottom...... when I flip it over to a fresh top I seal it then...

Sege, blink twice if Festool is currently working on an updated version of the mft3. Cheers from Chicago.

@sedgetool

Жыл бұрын

I do not know ....seriously

The top will cup over time even if you have never cut into it. Just the way it goes.

@sedgetool

11 ай бұрын

OK

Anyone know who makes that straight edge? : ) Thank you in Advance. Merry Christmas everyone.

@sedgetool

7 ай бұрын

tsoproducts.com/measuring-marking/ujk-straight-edge-with-metric-scale-968mm/?ref=cwmk4ofe

@scott31312

7 ай бұрын

Thanks big guy ! @@sedgetool

Thanks for News , Sedge .Where is Big D ?

@sedgetool

Жыл бұрын

was at a concert !!