Maverick 88 Heat Shield Four Years Later Still NO CREEP! Plus Tactical Upgrades from Mesa Tactical
This is a follow up video on the Mossberg Maverick 88 and the heat shield from Slade Street Tactical plus more tactical upgrades from Mesa Tactical!
Note: Video is for educational purposes only. Please check and abide by local laws before making any modifications to any firearm.
Link to the original Heat Shield review video!
• Mossberg Maverick 88 S...
Links to products mentioned in this video:
XTA Heat Shield for Maverick 88 Shotgun
www.sladestreettactical.com/p...
J5 Tactical V1-PRO Flashlight - The Original 300 Lumen Ultra Bright, LED Mini 3 Mode Flashlight
amzn.to/34eTigQ
Monstrum Q Series Offset Flashlight Mount for Picatinny Rails with Quick Detach Lever
amzn.to/33fDH1e
Mesa Tactical Shotgun Stock Adapter
www.sladestreettactical.com/s...
Shotgun Shell Carrier
www.sladestreettactical.com/p...
Пікірлер: 54
I have this heat shield on my 88 (18.5 in) barrel. For 4 years, works great, very pleased with this product, excellent shield.
@stevenhicks815
3 жыл бұрын
Could you post a picture with your shield on there? I have a light on mine wondering if enough room to put it on. Thanks
Happy Easter!! This is one of the best video’s I have seen. And I’ve seen a lot.. Thank you. I’m going to the website to purchase a heat shield for my maverick 88 that I just purchased..
I bought one of these for my maverick 88 3 years ago. Works great. I have shot over 2 thousand rounds with this on my Mav both this heat Sheild and my Maverick 88 has performed flawlessly. I have never had to mess with the shield or adjust it one time it has never budged. Great product.
Thanks for the info. Very educational and great presentation!
excellent Video! keep up the good work...
Nice upgrades, thanks.
Great vid man you earned this subscriber
Black Aces Tactical Quad Rail Maverick 88 works like a charm 👌
My 88 is in this same configuration! Differences are different light and mount. And mine is FDE with same tac star adp, and FDE hogue stock and grip!!!
I put one like this on mine over 9 yrs ago. I can’t remember who makes it, probably the same as this one. I wasn’t sure about the polymer but figured what the hell. Mine has never moved nor has the polymer fatigued. The only thing I didn’t like about it was the thickness of it obscured half my bead sight. I filed it a little bit down at the nose end and used a rat tail file to file a slight groove.
Have one on my 500. I'm going to put one on my 930. outstanding shield.
I have the same heat shield on my 590, and I love it. Obviously super affordable, but very well designed and functional. Installation takes all of 3 minutes. Absolutely would recommend. The only drawback is that it looks, well, like polymerized fiberglass.
@markspears8300
2 жыл бұрын
Got a 590a1. Mossberg Rocks!
THE AFTER MARKET MODS TO YOUR MAVERICK 88 ARE WELL THOUGHT OUT AND PRACTICAL. THE PISTOL GRIP AND ADJUSTABLE M4 STOCK ARE THE BEST QUALITY AND SUITABLE TO THE SAFETY ON THE TRIGGER GUARD AND COMB HEIGHT FOR A FRONT SIGHT BEAD. THE BARREL CLAMP AND LIGHT MOUNT ARE WELL PLACED FOR OPERATING THE LIGHT WITH YOUR LEFT THUMB WHILE YOUR HAND IS ON THE FOREND. THE CLAMP ALSO PREVENTS MIGRATION OF THE HEAT SHIELD. THE COMBINATION OF VELCRO ATTACHED POLYMER SHELL HOLDER WITH SHELL COMPRESSION TUBE IS THE BEST FROM BOTH WORLDS FOR SHELL CARRYING. SPARE POLYMER SHELL HOLDERS CAN BE KEPT IN A DUMP POUCH TO REPLACE AN EMPTY SHELL HOLDER ON THE RECEIVER. I HAVE A MOSSBERG ATP8 WITH WOOD FOREND AND STOCK, A LEATHER SLING AND SHELL CARRIER ON THE STOCK. WHAT KIND OF SLING WILL YOU RUN?
I bought this exact heat shield based off your review of it. Just took it shooting for the first time and it crept so bad that it jammed the forend, and I couldn't load more ammo into it. I noticed the creeping after my first load of shots (8 rounds). After 24 rounds is when it crept so far that the encircling clamp jammed the forend.
@corvidconfidential8826
Жыл бұрын
Sounds like a you-problem. Perhaps you installed it wrong?
After watching this video, youve convinced me to purchase a better camera. And of course, 2 maverick 88’s
that light “can easily illuminate somebody 600 feet away”……i HIGHLY doubt that. Other than that, great vid, Love what you’ve done to the Maverick. Looks awesome
@gouldayheem7344
2 жыл бұрын
Let's give him the benefit of the doubt and say he meant 60 ft 😆 great video though 👍
Nice video sir. I’m about to buy this gun I hope I like it.
@Zer0Nine
3 жыл бұрын
bisha ali Id buy it all over again. One of my favorites for sure!
@imperfectlump6070
2 жыл бұрын
I bought a 20 gauge cruiser.
Wondering if the heat shield would stand up to swapping out the barrel? I have the Maverick 88 Field/Security combo that comes with 2 barrels and use the longer one for target shooting and swap the shorter security barrel out when i leave the range. Also have the pistol grip/folding stock and love it compared to the original stock.
Need an extended tube to go from 5 to 7. Have an 18” bbl. Don’t want it past the end of the bbl.,or not much
If you get this shield make sure to get 4-40x1/2 screws so it will hold correctly specially on a 590 or 590 A1
I can never find anything for extended tube attachment, any links on that?
The screws are running the other way is that because of it fits better this way
The heat shield works fine for 6-rd magazine tubes but creeps on 7 w/o lug to stop it.
Where you get your upgrades?
How did you mount the flash light adapter and the sling mount with out any picatinny rails? I would like to set my gun up the same way.
@Zer0Nine
3 жыл бұрын
Monstrum Q Series Offset Flashlight Mount for Picatinny Rails with Quick Detach Lever that I have linked in the description actually sits between the barrel and the lower tube. No picatinny rail needed.
@41-willys99
3 жыл бұрын
@@Zer0Nine do you bolt the sling mount to the flash light mount between the barrel and the tube
@Zer0Nine
3 жыл бұрын
@@41-willys99 yes, exactly.
@41-willys99
3 жыл бұрын
@@Zer0Nine ok Thanks . was there a specific sling mount that you used?
Where is pistol grips and folding stocks illegal at what state you're from
Can that stock be installed on a Maverick 88 Cruiser?
What was the brand name of the heat shield and where did you buy it?
@AV1776
3 жыл бұрын
It's in the video description. Slade streets tactical.
Will any of these accessories fit for the 20 gauge mossberg 88?
@Zer0Nine
3 жыл бұрын
It might.
Does the pistol grip get in the way of the release button?
@Zer0Nine
3 жыл бұрын
It does take some getting used to. It's more difficult to get to with a pistol grip on however with some consistent training you'll get the hang of it.
Like mine 👍🏻
does the heat shield interfere with being able to see the bead?
@Zer0Nine
Жыл бұрын
Not from my experience. Have fun!
Is the heat shield metal or plastic?
@jamescruse3544
2 жыл бұрын
Click the link and find out. Takes 10 seconds
what kind of side saddle was that?
Where did you get your heat shield and stock?
@jamescruse3544
2 жыл бұрын
Read the description….
160 rounds? That’s 30 mins of target shooting at most
man.. just the thought of it being polymer.. no style at all.
@awakenotwoke2643
2 жыл бұрын
You really worried about "style",bro?