went to this bloke the get the dent in my head removed and it improved my IQ from 65 to 80! 10/10 great service

@dentremover01

2 ай бұрын

Thank you so much, hope it didn’t hurt too much?

Top man Martin, you did my BMW. its absolutely perfect

@dentremover01

2 ай бұрын

Amazing!! Thank you for commenting and a pleasure to repair your car too

You're a magician! I was half expecting you to pull a rabbit out of the filler cap.

@dentremover01

2 ай бұрын

Haha that would be easier than repairing these sides!!

All the PDR guys I've connected, some of the best on U - Tube. All have been afraid of taking on rear quarter panel of my 1988 fj-62 Land Cruise...... Nothing but hot air....IMHO

@dentremover01

2 ай бұрын

I’m sorry no one can help you. All I can say is look on Google and pick high ranking businesses ?

Nicely and professionally done repair - respect as usually!

@dentremover01

2 ай бұрын

Thank you so much!!

Unbelievable skill and patience 👌🏻

Just spotted this Martin, cracking video and thanks again ❤ If anybody watching this needs a difficult dent removing you are definitely the man for the job!!

@dentremover01

2 ай бұрын

Thank you 🙏

You're a very talented chap, awesome job, and very well explained, thanks.

@dentremover01

2 ай бұрын

Thank you so much! ☺️

This is great! You have a lot of artist and energy to do that remarkable PDR! Thank you!

@dentremover01

2 ай бұрын

Thank you so much! Yes you are right it is Art sometimes!! Like crafting a piece of art

Magnificent work

@dentremover01

2 ай бұрын

Thank you so much

Magnificent work mate! Respect from Australia!

@dentremover01

2 ай бұрын

Thank you DeeBee 🦘

This seems like a fun job or even a hobby for your own cars

@dentremover01

2 ай бұрын

Hi Nick. Yes it’s my hobby aswell as my work! Love it!

Thank you so much for sharing this brilliant video; I'm utterly impressed by what you can do with your hands, tools, and your mind. Absolute admiration for your work. 👏👏👏🙌🤝🤜💪

@dentremover01

2 ай бұрын

Thank you so much Pablo for your great comment ! I’m very pleased you enjoyed the video 🙌🏼

This stuff always amazes me. Cheers from Nova Scotia!!

@dentremover01

2 ай бұрын

Thank you for watching!

Great job.

@dentremover01

2 ай бұрын

Thank you! Cheers!

Good job 👏

@dentremover01

2 ай бұрын

Thank you! Cheers!

Tidy job. Amazing skill.

@dentremover01

2 ай бұрын

Thank you so much

Very good Technician very nice 👌 👏

@dentremover01

2 ай бұрын

Thank you! Cheers!

Mad Skillz props!

@dentremover01

19 күн бұрын

Thank you kindly

Thanks for your

@dentremover01

2 ай бұрын

Most welcome

Хорошая работа. Молодец!

@dentremover01

2 ай бұрын

Thank you so much. Did my subtitle translation work for you?

@andershrom2311

2 ай бұрын

@@dentremover01 Я смотрел с переводом нейросетей

💯 genius

@dentremover01

2 ай бұрын

Thanks Max

Круто. Отличный мастер ❤

@dentremover01

2 ай бұрын

Thank you so much

Nice job You always do a nice job though. I was wondering Do you ever heat your shop. Maybe a small infrared heater just pointed in your direction. 🥶

@dentremover01

2 ай бұрын

Thank you!! Yes I’ve used a parafin burner but looking into a panel heater I’ve tried them and really good and cheap to run

You , my friend are a magician ! What part of the uk are you based ?

@dentremover01

2 ай бұрын

Thanks Mark. We’re in Beverley East Yorkshire

Lots of tips in this video, I never knew heating up the stubble made a difference. What do you do if the paint cracks, can you melt it together again?

@dentremover01

2 ай бұрын

Thanks Daniel! I’m not heating my stubble I’m warming up my double chin! Serious note the heat gun takes a few secs to warm do I gauge it with my Jowels Cracked paint is the death of the repair, once it cracks it stays cracked but by warning the panel, using select tips I can really minimise this issue. Ps. I have a parcel for you!

That is amazing work fair play to you, probably the best I've ever seen, ive been painting for over 33 years and have used and seen a lot of PDR but nothing on this level, i try to do small bits on blend panels and dents I'm repairing for painting just to have a go really it does interest me but I'm not any good, i just have a small amount of cheap glue stuff and bars off amazon. Im not sure on what glues to use as i struggle getting tabs to stick could you tell me where and what glue i should use Great video 👍

@dentremover01

19 күн бұрын

Thank you for your great comment! And by the way I subbed to you last night! PDR is a great way to reduce your blend area if you can wiggle a ding out it will save time and products. Amazon glue kits are ok but you’re better off investing in proper GPR equipment. Speak to Keco Uk and ask for Sam, or Kevin and mention I sent you. You just need a Variety tab kit, some flex collision glue and their glue gun. And a slide hammer. 99% Isopropyl from Amazon and you have all the basics for a range of small to medium dents Look at the Keco 6c process to as that will help regulate your glue pull method

@TheHumblePaintSprayer333

19 күн бұрын

@@dentremover01 Thank you for the reply and sub, ill check out the stuff you mentioned, i do have a small power tec kit with a slide hammer but ill get on the internet and check out what you said Thank you for all the advice i really need to get some where with learning to do this for myself as there's not a lot of reliable enough guys in my area doing it

@dentremover01

19 күн бұрын

It just takes practice. You don’t need all the gear, if you see what I use on most of my videos when glueing (not massive stuff) I use simple gear. Happy to let you pop down for a few hours if your local

@TheHumblePaintSprayer333

19 күн бұрын

@@dentremover01 Thank you thats great, id be very interested in coming over and having a lesson, I'm based in swindon are you far from there

Удачи тебе Мартин

@dentremover01

2 ай бұрын

Thank you so much

Martin what tap down would you recommend for aluminium mate

@dentremover01

2 ай бұрын

Hi Sean. Thanks for your message. Your best off choosing a nice screw tip knock down and then you can swap your tips. Top choice for Ali, I’d look at a root beer or peek tip and then just practice to see what works best. I wouldn’t go too sharp as Ali takes more effort imo to flatten down. But again with practice you’ll be able to dial in knockdown work Hope this helps

Красивы работа классно музика

@dentremover01

2 ай бұрын

Thank you so much

Magnificent work, but why say thinks like insurance right-off🤯 world we live in🤮

@dentremover01

2 ай бұрын

Thanks for your comment. Our customer was sure the insurance would write it off. Both 1/4 panels would have been down for replace and the doors needed dents removing. Atleast half the car would be repainted so they would almost certainly write it off

@channex8179

2 ай бұрын

I am the owner of this BMW, and the insurance company wanted to write it off and offered me about 2k short of current market value. Every PDR specialist I contacted and showed the car to said they couldn't do it and it needed both rear quarters replacing. Martin was confident he could sort it and sure enough he did sort it, he also kept me informed the whole time messaging me daily with a progress update and photos. Martin is a lovely guy, very informative, and has a real passion for his trade.

@dentremover01

2 ай бұрын

@channex8179 thank you so much Ade 🙌🏼 that’s the last of the videos il leave you “be” now! Thanks again for contacting me for your Dent Repair and putting your faith in me Thanks Martin

@channex8179

2 ай бұрын

@dentremover01 Haha, no worries 👍🏻 👊🏻

They're money-pits but beautiful cars.

@dentremover01

2 ай бұрын

They can be some times! But this car was very clean for its age and worth saving

Да такой вмятине мастеру духи поднимают

@dentremover01

2 ай бұрын

Certainly does

Hi where are you based in the uk

@dentremover01

2 ай бұрын

Hi Paul. We’re in Beverley. East Yorkshire

@paulskivington46

2 ай бұрын

Hi mate thank you for the reply back to me 👍🏻

What do you pay yourself per hour doing these dent removals?

@dentremover01

2 ай бұрын

Not enough

@michaelkitchen6000

Ай бұрын

@@dentremover01 super tedious job. I’m sure when you try to calculate hours or pay for the job that you come under the estimate you would have after the job a good part of the time? You underestimate the jobs quite often probably..?

@dentremover01

Ай бұрын

@@michaelkitchen6000 that’s a great reply and interesting And yes I agree that maybe I can and do get my pricing wrong and il say that most days il undercut myself on jobs and prices BUT. And this is the thing, if I priced each job to give myself a good wage and be able to pay everything and make maximum profit I wouldn’t be in business now. There’s a fine line on what we (in the UK) can get away with charging because old Fred in his garage will happily fill and paint the side of a car for £50 and (most) people don’t see the true value in PDR People see us pop a dent out in 10 minutes and get angry when they have to pay £50 But will let their car go for 3 days and be ruined by Fred and his paint gun. It’s absolutely backwards! You’d think people would pay twice as much for a magic 110% repair without paint. In the USA it’s totally different as they have the carfax register so it’s within the customers interest to pay a PDR tech loads more money and insurance to get that magic repair and keep their car off the repair register. So unfortunately I have to price my jobs reasonably and fix a few to make a profitable business And just to add. It’s not all about making maximum money and profit, us PDR techs put a hell of a lot of work into building our skillset, we can literally walk into any major bodyshop and outskill the workforce who are there filling and painting vehicles. That’s no one’s fault and everyone has their skill, but the PDR techs are looked down on because they command decent prices and they should get it for their 20-30yrs of practice and learning to produce top quality work Hope that makes sense

Is not free you have to pay shipping that's not free

@dentremover01

20 күн бұрын

What’s that for?