the quality of the video went way down after uploading it to youtube, but here are some tips for using and adjusting your master forge h140xl.
Жүктеу.....
Пікірлер: 26
@tanyahinde92745 ай бұрын
I can not thank you enough for explaining all the adjustments. My stove was not being used correctly. It was wasting so many pellets and I had to shut down to clean out box every other if not every day. My flame was ALWAYS HUGE. Now it's a small white flame and I have not had to shut it down going on 5 days!!!! Thanks again very helpful 👍🏻👍🏻
@ECHOBEACHADVENTURES7 ай бұрын
I set mine like he said, and it works perfect
@alexfefee26127 ай бұрын
This video was super helpful, if you’re looking for ideas for another video a cleaning video would be awesome for us pellet stove beginners lol
@HucklebearysAdventures7 ай бұрын
Mine has gave me issues since day one. And now its e1 and e2 and everything is working as it should. Only had it for a month so far
@HucklebearysAdventures
6 ай бұрын
Update on this, it finally gave up during 0 degree Temps, after less then 2 months it broke, had to take it out and bring it back to lowes thankfully they agreed to switch it out and this one has been better so far (only been a month)
@tanyahinde92745 ай бұрын
I find that i have to shut down and clean every other day which kind of defeats the purpose of it having a three bag Hopper. My burn box fills up and overflows and doesn't burn all the pellets. I just put all the settings on 20 20 with p1234
@jamesandsarahholsomback64057 ай бұрын
What would you set each P at if it was your primary heat source? Which P should I use. Also which eco is best?
@iluvny0811
7 ай бұрын
It depends on the size of your home or space you are trying to heat. You could start on p1 and if you find your self sitting next to an open window just to cool off a bit turn it down to a lower p setting lol. Most of dialing in your stove for your space is trial and error. Keep messing with it. You’ll figure out what works best for you.
@trustyoldiron54165 ай бұрын
I don't know if you have any ideas but when I get to the screen to change between eco1 and eco2 I cannot select between them when I press the clock. It only will highlight Eco2. Customer service is non existant for this stove.
@bradc72547 ай бұрын
also if i had a 2 floor 4 bedroom house with kitchen living room and laundry room with garage and utility room all open fornthe heat to flow into, and its decently large do you have a rough idea of what you would run it at. also kine isnt the same one. its identical except fot the control panel screen on thebritht side of urs. on mineits in the top in the back peeling out from behind the stove, just behind the hopper door liked up with the flue. other than that its identical to yours. the screen even looks exactly the same, just in a differnt spot is literally the only difference!
@iluvny0811
7 ай бұрын
trying to heat that much space, and im sure you have hallways that will limit the free flow of air, you definitely wat to run it on p1, and also use fans on the floor to blow cold air toward the stove. when you do that the fans blow the cold air along the floor toward your heat source and that low cold air will be replaced with warmer air up higher and it will create a constant flow of cold air toward the stove and warm air away from it. try this for a couple hours and see if you notice a difference. also, your fighting a losing battle trying to heat your garage with warm air form the house. even if its insulated, all it will do keeping the door to the garage open is waste warm air you could be using to warm you living space.
@alvarose59697 ай бұрын
So I have the stove in the video, I have a question about the smoke coming out when the blower starts, the smoke comes into the home but not out through the exhaust. Is that something that can be adjusted through the settings?
@iluvny0811
7 ай бұрын
Is the stove new? Or have you been running it a while and this is a new problem?
@alvarose5969
7 ай бұрын
@@iluvny0811 it’s new
@iluvny0811
7 ай бұрын
@@alvarose5969 if you havent gone throught the burn in process yet that it normal. the first time you run it, it will smoke a bit because it needs to burn off any oil from the manufacturing process and cure the paint on all the surfaces that get hot. it will smoke a little, and it will smell a lot. the smoke will go away after about 10-15 minutes, the smell will fill your house. some people like to do the first burn before they bring the stove into their house to avoid this. i think the instrustion tell you to burn it on p1 for 90 minutes for the break in process. so the best i can tell you is to open a lot of windows and use some fans to try to blow the smell ouside. if the smell coming from your stove smells like wood, then you definitely have a problem and should probably return the stove. let me know how you make out.
@iluvny0811
7 ай бұрын
@@alvarose5969 here is a video of mine during its first burn. Hopefully you’re not getting any more smoke than this. kzread.infow0mkcaDh2MU?feature=shared
@bradc7254
7 ай бұрын
mine did that when I first first got it. it you look from the side is it actually smoke coming from the door and paint and rising and getting taken with the blowers air flow? and does it smell super chemical like? if all answers are yes you can just run it and open a window with a fan blowing it outside and try not to breathe it. and keep an eye on it! it should stop in 15 20 min. 30 tops. if it just smells like burning pellets then it's not what I'm describing@@alvarose5969
@karenforshay7705 ай бұрын
Can you help me? I cannot figure out how to adjust the blower fan.. I keep trying to make adjustments on the main control but nothing changes. I also have the thermostat set but it just continues heating way past the set temperature.. thank you so much!
@iluvny0811
5 ай бұрын
did you use the phone app to make adjustments previously? If you did I had this same problem. and even if you didnt use the phone app. try doing a full shutdown. press and hold the power button until the display says "switching off" and let it go through the complete shutdown process until the display says "goodbye" it will take 15-20 minutes for it to go through the whole process. then turn the master power switch on the back of the stove to off for about a minute to be safe. then turn master power switch back on and restart the stove. if for some reason your stove wont shut down when pressing and holding the power button you can use the main power switch to cut power to the stove and shut it down that way.
@karenforshay770
5 ай бұрын
Thank you so much I’m going to try this. Yes I used the app and I’m going to disconnect it. Last night I was making changes from the stove itself, but it didn’t seem like they were working.
@karenforshay770
5 ай бұрын
That worked! Now another question is there a way for the stove to run quieter? I don’t mind the noise of the fan, but it’s always the same volume. It seems like when I adjust the settings now I can control the thermostat, but the fan noise continues 24/7. I know I have to play with it but I’m trying to understand blower fan and pellet drop and why there are so so many adjustments. I do have it on P4 and eco 1. The stove is going to be my primary heat source although I have back up heat . my house is only eight 900 ft.². Thanks again.!!!
@bradc72547 ай бұрын
sonis the blower fan the external one that blows the heated air into the surrounding area? I am confused on which of the fans is the external one on the front of the stove! please help 🥺 🙏🏻 🙏🏻 🙏🏻
@iluvny0811
7 ай бұрын
“F” is for your hot air distribution blower fan motor and “S” is your fire box air feed fan.
Пікірлер: 26
I can not thank you enough for explaining all the adjustments. My stove was not being used correctly. It was wasting so many pellets and I had to shut down to clean out box every other if not every day. My flame was ALWAYS HUGE. Now it's a small white flame and I have not had to shut it down going on 5 days!!!! Thanks again very helpful 👍🏻👍🏻
I set mine like he said, and it works perfect
This video was super helpful, if you’re looking for ideas for another video a cleaning video would be awesome for us pellet stove beginners lol
Mine has gave me issues since day one. And now its e1 and e2 and everything is working as it should. Only had it for a month so far
@HucklebearysAdventures
6 ай бұрын
Update on this, it finally gave up during 0 degree Temps, after less then 2 months it broke, had to take it out and bring it back to lowes thankfully they agreed to switch it out and this one has been better so far (only been a month)
I find that i have to shut down and clean every other day which kind of defeats the purpose of it having a three bag Hopper. My burn box fills up and overflows and doesn't burn all the pellets. I just put all the settings on 20 20 with p1234
What would you set each P at if it was your primary heat source? Which P should I use. Also which eco is best?
@iluvny0811
7 ай бұрын
It depends on the size of your home or space you are trying to heat. You could start on p1 and if you find your self sitting next to an open window just to cool off a bit turn it down to a lower p setting lol. Most of dialing in your stove for your space is trial and error. Keep messing with it. You’ll figure out what works best for you.
I don't know if you have any ideas but when I get to the screen to change between eco1 and eco2 I cannot select between them when I press the clock. It only will highlight Eco2. Customer service is non existant for this stove.
also if i had a 2 floor 4 bedroom house with kitchen living room and laundry room with garage and utility room all open fornthe heat to flow into, and its decently large do you have a rough idea of what you would run it at. also kine isnt the same one. its identical except fot the control panel screen on thebritht side of urs. on mineits in the top in the back peeling out from behind the stove, just behind the hopper door liked up with the flue. other than that its identical to yours. the screen even looks exactly the same, just in a differnt spot is literally the only difference!
@iluvny0811
7 ай бұрын
trying to heat that much space, and im sure you have hallways that will limit the free flow of air, you definitely wat to run it on p1, and also use fans on the floor to blow cold air toward the stove. when you do that the fans blow the cold air along the floor toward your heat source and that low cold air will be replaced with warmer air up higher and it will create a constant flow of cold air toward the stove and warm air away from it. try this for a couple hours and see if you notice a difference. also, your fighting a losing battle trying to heat your garage with warm air form the house. even if its insulated, all it will do keeping the door to the garage open is waste warm air you could be using to warm you living space.
So I have the stove in the video, I have a question about the smoke coming out when the blower starts, the smoke comes into the home but not out through the exhaust. Is that something that can be adjusted through the settings?
@iluvny0811
7 ай бұрын
Is the stove new? Or have you been running it a while and this is a new problem?
@alvarose5969
7 ай бұрын
@@iluvny0811 it’s new
@iluvny0811
7 ай бұрын
@@alvarose5969 if you havent gone throught the burn in process yet that it normal. the first time you run it, it will smoke a bit because it needs to burn off any oil from the manufacturing process and cure the paint on all the surfaces that get hot. it will smoke a little, and it will smell a lot. the smoke will go away after about 10-15 minutes, the smell will fill your house. some people like to do the first burn before they bring the stove into their house to avoid this. i think the instrustion tell you to burn it on p1 for 90 minutes for the break in process. so the best i can tell you is to open a lot of windows and use some fans to try to blow the smell ouside. if the smell coming from your stove smells like wood, then you definitely have a problem and should probably return the stove. let me know how you make out.
@iluvny0811
7 ай бұрын
@@alvarose5969 here is a video of mine during its first burn. Hopefully you’re not getting any more smoke than this. kzread.infow0mkcaDh2MU?feature=shared
@bradc7254
7 ай бұрын
mine did that when I first first got it. it you look from the side is it actually smoke coming from the door and paint and rising and getting taken with the blowers air flow? and does it smell super chemical like? if all answers are yes you can just run it and open a window with a fan blowing it outside and try not to breathe it. and keep an eye on it! it should stop in 15 20 min. 30 tops. if it just smells like burning pellets then it's not what I'm describing@@alvarose5969
Can you help me? I cannot figure out how to adjust the blower fan.. I keep trying to make adjustments on the main control but nothing changes. I also have the thermostat set but it just continues heating way past the set temperature.. thank you so much!
@iluvny0811
5 ай бұрын
did you use the phone app to make adjustments previously? If you did I had this same problem. and even if you didnt use the phone app. try doing a full shutdown. press and hold the power button until the display says "switching off" and let it go through the complete shutdown process until the display says "goodbye" it will take 15-20 minutes for it to go through the whole process. then turn the master power switch on the back of the stove to off for about a minute to be safe. then turn master power switch back on and restart the stove. if for some reason your stove wont shut down when pressing and holding the power button you can use the main power switch to cut power to the stove and shut it down that way.
@karenforshay770
5 ай бұрын
Thank you so much I’m going to try this. Yes I used the app and I’m going to disconnect it. Last night I was making changes from the stove itself, but it didn’t seem like they were working.
@karenforshay770
5 ай бұрын
That worked! Now another question is there a way for the stove to run quieter? I don’t mind the noise of the fan, but it’s always the same volume. It seems like when I adjust the settings now I can control the thermostat, but the fan noise continues 24/7. I know I have to play with it but I’m trying to understand blower fan and pellet drop and why there are so so many adjustments. I do have it on P4 and eco 1. The stove is going to be my primary heat source although I have back up heat . my house is only eight 900 ft.². Thanks again.!!!
sonis the blower fan the external one that blows the heated air into the surrounding area? I am confused on which of the fans is the external one on the front of the stove! please help 🥺 🙏🏻 🙏🏻 🙏🏻
@iluvny0811
7 ай бұрын
“F” is for your hot air distribution blower fan motor and “S” is your fire box air feed fan.
Mines gives giving E2 and no fire starts
Any advice
15/10 on each except for 5 & 6 leave on 0/0,