I love seeing a pristine bearing being rolled around in the dirt

@Kapparie

Жыл бұрын

Well it is a form of job security. The machine will be back next year for a new bearing. 😊

@worrelodorrel7432

Жыл бұрын

I love seeing their pristine work boots getting all scuffed up in the dirt 😂😂

@dragoncoffee2949

Жыл бұрын

Yea, watching the hack job these guys do makes me crazy.

@martinswiney2192

Жыл бұрын

Reckon what Motion Industries charges for that bearing? Its gotta be Chinese bearing or maybe the shop in the 3 streets down makes em out of recycled Moped crankshafts.

@jimstelfox6120

Жыл бұрын

Not going to carry it is he, only got standard issue flip flops on

The guy holding the bar to be hit by the sledge is incredibly trusting.

@NICOSTONES

Жыл бұрын

I wouldn't trust nobody in this case..and I wander how many accidents happen in this kind of workshops

@SouthSideChiTown

Жыл бұрын

The guy he replaced 's nickname was "Lefty"

Mmm hammered bearings. And hammered cast iron flywheels. And blowtorched axle! All the things we love and approve here in 1930s USSR!

@Biker118347

Жыл бұрын

And hammering on the hub right at the shaft was sure to peen the hub tighter.

I can't believe that they did not use an ounce of lubricant when replacing those huge wheels. Everything I have ever done involving an axle and a keyway, oil, or grease always helped.

@nicholassmerk

Жыл бұрын

They were taper fit. They need to go on clean so they lock up.

@rudyyarbrough5122

Жыл бұрын

@@nicholassmerk Thanks, that makes sense.

@goeachitt

Жыл бұрын

They use sand to lubricate, change the bearings out every 2 weeks ...

I'm glad he has his safety squint on when cutting..

@desfiladero

Жыл бұрын

Thank god he's wearing gloves

@flintsmith4771

Жыл бұрын

That's some next-level squinting. Cutting-torch squints! 10:00

@jamesferguson2353

Жыл бұрын

and the steel toed sandals

@goeachitt

Жыл бұрын

🤣

@HubertofLiege

Жыл бұрын

Holding his breath, too

Other than most commenters here I have respect for these men that get the job done with elementary means. I wondered if it would have worked if they had tried to pull the two wheels towards each other doing the following: 1) Place both wheels on the axle, keys in place. 2) There are 4 holes in each. Feed a chain through the two opposing uppermost holes. Do the same with the two lower holes. Close both chains into a tight loop. Stick a bar through each loop and have a man at each wind the loop so it tightens. And another idea: the center of such an axle contributes next to nothing to it’s strength. A throughhole could serve to poor in liquid nitrogen to shrink it and ease disassembly. Your comments are welcome!

I wonder how they decide who gets squashed next. Flames and sparks everywhere and blokes in dresses, what could possibly go wrong 😂

@Manufacturingvideos10

Жыл бұрын

🤣

This situation is a perfect illustration for the old saw: Perfect is the enemy of Done... Sure, it's something of a horror show if you're used to clean-room assembly facilities, but this is reality in many parts of the world.

Not exactly precision work but these guys deserve every penny they earn.

@Manufacturingvideos10

10 ай бұрын

Truly agree 👍❤️

So what do you prefer today? Getting crushed to death or getting caught on fire?

These guys know just the right amount of magic dirt to pack into the bearings for proper break in.

Third world hero’s. Amazing watching how much they can do with very little.

They are getting the job done, and very resourceful too! It always amazes me how these guys are able to work with what little they have and succeeded 💯👍👍

@Manufacturingvideos10

Жыл бұрын

Thank you so much for well appreciating us👍❤️

They are installing new bearing and don't bother to cover to protect the bearing from dirt, moisture WHAT A BUNCH OF HACKS

All that personal safety gear used is outstanding

@joonya4427

Жыл бұрын

Safety what now?

@nikolayivashenko3227

Жыл бұрын

И сваркой без маски😂

Yes, just the environment for a precision bearing.That's the way to mount a bearing, just use a bigger hammer.

I like and respect the low-tech sheer force basic tools they have to employ in Pakistan (?) To replace two beautiful steel bearings(unpacked& un greased) barely out of the dirt to parts that are bare wiped clean and re assembled is like putting nice lipstick on a pig.

@bushratbeachbum

Жыл бұрын

Grease will attract and retain abrasive rock dust. It's a rock crusher jaw

@serioustrouble63

Жыл бұрын

and precision bearing mounted with a sledge hammer!

@Manufacturingvideos10

2 ай бұрын

👍

@Manufacturingvideos10

2 ай бұрын

Yuo

@Manufacturingvideos10

2 ай бұрын

Yes they did

I'm always amazed by their ppe😮. I really feel for the guys in sandles.😢

Ahhhh! All done, good for another twenty hours of work!?

That temporary lifting bracket failing was almost a given. Even the welder looked nervous about it when they first lifted with it. Presume that's a rock crusher Jaw and elliptical axle assembly?

YES the Safety Gear, sandals & loose clothing, then the lack off gloves, safety glasses, face shield, burning goggles and welding hood. Maimed, blind and deaf at an early age. Very sad....

I think the Health & Safety manager was away that day.

No one could have possibly seen that lifting lug failure coming.😂 6:42

When I see these type videos, I always wonder how many don't go home after work and/or go home with major injuries...

@Manufacturingvideos10

Жыл бұрын

Yeah you are correct about that but nobody can change here rules of these workshops 😒

@lobosolitario3699

Жыл бұрын

Miro ESTOS vídeos desde URUGUAY. UN PEQUEÑO PAIS QUE YA PASO POR ESTA FORMA DE TRABAJO AUNQUE QUEDA AUN ALGO EN ALGUNOS TALLERES. POR LO TANTO MI ADMIRACION Y MIS MAYORES RESPETOS POR LOS TRABAJADORES DE SU PAIS.

@deepwinter77

Жыл бұрын

@@Manufacturingvideos10 what about small things like steel toe cap boots and hearing protection.

@mapleholler9800

Жыл бұрын

No steel toed sandals. But they get the job done.....gotta respect that.

@jamodrummer

Жыл бұрын

No fire protection, no real shoes (1 guy only), how dangerous this is!

Just gotta love those steel capped Sandals those guys use. There must be a market in the West for that kind of thing. Well done for your safety team.

This is awesome work carried out under a shed ? This should be done in a heavy machine workshop....but this teams looks so clever and and done the job in a small shed...hats off.

Cleaning the area where that lug went on would be my first priority. Weld would have some good metal to bite into

@bigredc222

Жыл бұрын

One already broke off you'd think they'd learn.

@Manufacturingvideos10

2 ай бұрын

No they not because of ownership

Good guys who know what they do - no one is wearing really dirty dresses.

Use a tag line guys on stuff when its on that crane. Helps guide it as well as if you keep a bit of tension on it. You can feel if its going south a bit

These guys are strictly bush leaguers. I worked on rock crushing equipment for a couple of years and replaced dozens of these live jaw bearings. This assembly is from a rock breaker which breaks larger rocks down to a size that will feed through your crusher. These things weigh a couple of tons so you should use nylon slings or a chain sling instead of a decking chain and make sure your rigging is properly placed so you don't drop the unit like these guys did. To remove those flywheels you set the unit down flat on some dunnage so their outer edge just clears the ground. You use a 50 - 100 ton hydraulic wheel puller rigged through the holes in the flywheel with a pulling bar so the hydraulic ram applies pressure to the end of the shaft. I know a lot of you are going to say that they don't have a hydraulic puller because they cost too much. So how much would one cost in comparison to having a backhoe with a jackhammer unit? The answer is less than 5% so that is no excuse. Once you have your puller in place you crank up the ram pressure and many times the wheel will pop right off. Sometimes you have to shock the wheel with a sledge hammer by hitting it on the wheels face. On occasion, you may have to apply a little heat with a tiger torch to the wheel hub to get it to break loose. The wheels are a taper fit on the shaft so once they move a tiny bit they break loose easily. When it comes to the bearing replacement, you start by splitting the outer race with a cutting torch and then cut the bearing cage apart leaving you with just the inner race. To remove the inner race you can use a hydraulic puller with a bearing splitter of an appropriate size or you can use a cutting torch. If you use a torch YOU DON'T USE IT LIKE THESE GUYS DID. Instead of cutting perpendicular to the shaft, you lay your torch over so it is parallel to the shaft. Going perpendicular can and will damage the shaft like they did here at 14:29 where you can clearly see the gouge taken out of the shaft which weakens it and may cause it to fail in service. With your torch parallel to the shafts surface, you start to whittle away the bearing using just enough oxygen cutting jet to blow the oxidized metal out of the way. When you get down close to the shaft you can see the line of departure between the bearing and the shaft. Keep working at it until you have cut all the way across the inner race. There is no need to cut more than one slot! Once done, you take a cold chisel or a steel wedge and place it parallel to the shaft surface and drive it into the end of the slot you just cut in the race. The wedge effect will cause the race bore to open up and you can easily slide the race off the shaft. When you install the bearing and the flywheels you should always give the mating surfaces a coat of anti seize. This will keep the components from freezing together should they have to be removed in the future.

@jagmarc

Жыл бұрын

Seems to me the repair they've done won't last anywhere as long. Maybe the customer isn't looking to the future and is winding down

@burgerjointgame

Жыл бұрын

Thanks for taking the time to write all that - I had so many questions and you answered them all! I was curious what this piece was for and thought there must be a better way of doing it, so I guess now I know! I'm just wondering: the new bearings that they installed - where were the old bearings on the assembly when they started work? Had they already been destroyed or removed?

@enwri

Жыл бұрын

@@burgerjointgame The inner race of the old bearing is all that was left, and is what they cut off.

@scootertramp4355

Жыл бұрын

@@jagmarc Even if the customer is winding down, that's no excuse. These assemblies are interchangeable so this piece could very easily end up on another breaker. That gouged up shaft could easily break and then what do you have? If you are going to work on these kinds of assemblies do it right.

@theoldbigmoose

Жыл бұрын

Scooter thanks for all the details.. One more question, how is the grease kept in those bearings with no apparent seals?

Yep, I always wear explosive cotton dresses when I'm torching it up. 😂😂😂

Got to love those Indians. They have absolutely no fear of anything. I guess when one dies a thousand more are there to take their place.

@Manufacturingvideos10

Жыл бұрын

Correct ✅

@gibbogle9486

Жыл бұрын

Pakistanis

@dunebuggy1286

Жыл бұрын

Ok then, Pakistanis.

when i see this i allways think, safety first!!!!!

@Manufacturingvideos10

Жыл бұрын

Yes you are right ✅

When I nod my head, you hit it!

How about those steeled toed sandals? It appears that a large part of the safety program consist of the guy in charge of safety shouting ," look out , get out of the way " before one of the men is crushed by the crane operator .

@Manufacturingvideos10

Жыл бұрын

Omg you scare me with your words 🤣

@caddyrack

Жыл бұрын

They're lucky they have a crane. Some other shops use and elephant and a series of pulleys to lift heavy objects.🤣🤣

@pjjms

Жыл бұрын

Safety boots won't save them from something that heavy

@gus2600

Жыл бұрын

I know that . Mine was meant as a facetious ,sarcastic , and satirical dig at some of the ridiculous regulations of OSA . You know that there are not steal toed sandals and they mostly wear sandals in that part of the world and that they have great safety records without the help of bid brother .

This is my type of vid.. Ta for uploading 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

@Manufacturingvideos10

10 ай бұрын

No problem 👍

Had to laugh when the 'lifting eye' stuck on by the 'welder' gave way.. zero surface prep, probably little weld penetration and the eye was made out of some scrap from the last job and stuck on with bird poo weld.....

@Manufacturingvideos10

Жыл бұрын

Correctly said thanks for watching ❤️👍

@gibbogle9486

Жыл бұрын

I was wondering how long it would last as it was picked up.

Appalling working conditions, however It's good to see they are at least wearing their safety flip-flops.

How do they keep from catcking on fire, they'r walking wicks.

@bushratbeachbum

Жыл бұрын

A sense of responsibility for their own safety and common sense id say

I’m a sally safety guy, given the conditions, they are amazing. It’s the cultural attitude. It is what it is.

@altergreenhorn

Жыл бұрын

was the same 100 years ago in the US

Gute Arbeit in Badschlappen. Wenn der Fuss mal platt ist, steht schon der nächste bereit.

@Manufacturingvideos10

Жыл бұрын

Thanks for your review ❤️👍

My favorite tool for taking off stuck pulleys and bush bores is an air hammer, so I completely understand the way they removed those, but they needed some sandpaper, emory cloth or something to clean up those surfaces before replacing them. Then they should have added some anti-seize and some grease or oil on the threads. The next time those bearings need to be replaced, they might end up with the shaft getting pulled out of the housing before the pulley and flywheel come off.

@andymachala999

Жыл бұрын

I'm sure they cleaned it up but didn't show it. I am constantly amazed in all these videos that something doesn't get galled and seize up so they have to cut the whole thing apart or junk it. Maybe they just don't show those.

@Manufacturingvideos10

Жыл бұрын

Yes you’re right about these kind of videos

@AffordBindEquipment

Жыл бұрын

job security.

@kolsen6330

Жыл бұрын

Also do all the shaft cleanup before putting the new bearing on. I have used the piece of shafting hanging from the bridge crane many times. Nothing like getting the big hammer out.

@chrisduplessis4172

Жыл бұрын

​@@kolsen6330 on it

Necessity is the mother of invention...old school still works....pity they couldn't have rolled the bearing over some wood but at least it was still in its protective wrapping...keeps everyone fed...👍👍

@Manufacturingvideos10

Жыл бұрын

Thank you so much for well appreciating us stay safe and healthy 👍❤️

@bernieshort6311

Жыл бұрын

That’s not old school, old school would have been on top of cleanliness.

@richardmessenger9474

Жыл бұрын

@@bernieshort6311 they don't have the luxury to afford concrete floors and a dust free environment..having had to repair heavy plant in muddy fields and dusty conditions overseas it's not easy to be surgically clean...given the environment and minimal tools I think they did a fantastic job ...in the west that equipment would have been scrapped.

@bernieshort6311

Жыл бұрын

​@@richardmessenger9474 I wasn't criticizing the workmanship or the people, I only criticized the meaning of Old school, so don’t get your knickers in a twist.

@richardmessenger9474

Жыл бұрын

@@bernieshort6311 I wasn't getting my nicks in a twix...sorry it came out lke that....👍👍

mohamed your project IS ON FIRE!!!

@Manufacturingvideos10

Жыл бұрын

Thanks for watching

I'm a design engineer, I learn a lot from these videos, thank you!

@Manufacturingvideos10

Жыл бұрын

Thank you so much 👍❤️

I wanna hear the guy holding the steel chisel scream when the guy swinging the sledge hammer misses and hits the chisel holder in both arms - and we hear the bones snap.

@Manufacturingvideos10

10 ай бұрын

😳

These guys a amazing.

@Manufacturingvideos10

10 ай бұрын

Thanks for watching

ما شاء الله تبارك الرحمن - ربي يحفظكم ويبارك فيكم - عمل رائع

Love the safety sandals. Looks like Brampton...

@Manufacturingvideos10

2 ай бұрын

😝

Would rather see them hammer on a brass punch than on the race itself.

@Manufacturingvideos10

Жыл бұрын

👍❤️

@calthorp

Жыл бұрын

hammering hard faced hammers on hardened bearing. If any pieces had flown off they would be like bullets.

Did I miss seeing packing the bearing with grease

@bushratbeachbum

Жыл бұрын

Open bearing so it would just attract and retain abrasive rock dust. It's a rock crussher jaw

@stevenwescott1422

Жыл бұрын

I believe the bearing sits in a saddle on the crusher which is sealed and then bearing runs in oil. Jmtc

Not quite up to the safety standards i've been use to , but they got the job done in the end .

not pretty, but job got done. thanks for sharing!

@Manufacturingvideos10

Жыл бұрын

Thanks for supporting ❤️

The guy with the cutting torch was smart enough not to wear sandels.

@user-wf4hy4ub7p

Жыл бұрын

But not smart enough to wear dark lens goggles.

Quality work .if the elephant would help

What a hack job, cleanliness be damned and the keyway for the counterweight were shot. They will be revisiting this in the not to distant future.

@bushratbeachbum

Жыл бұрын

Pop over there and show them how it's done champ.

I love how the video is sped up to make them sound exactly like Minions - even down to the laugh at 3:28 - the resemblance is uncanny

I wonder if they ever watched Shake Hands With Danger movie series.

Nice looking roller bearings. From Sweden. This must be some serious gear :)

@Manufacturingvideos10

Жыл бұрын

Thank you so much ❤️👍

Good Job 👍 ❤ Do Hard And You Will win the World ❤️

@Manufacturingvideos10

2 ай бұрын

Thanks

Look, I'm no engineer, but it seems to me this situation clearly calls for the application of inverse reactive current, stabilized across a unilateral phase deflector, which could automatically synchronize cardinal values using a calibrated set of variable dimension flux wrenches. No, I'm not talking about common variable dimension flux wrenches you'd use in a modi-fisable application; that would almost certainly yield a reaction of magneto-relative gyration which would spin around at something like (X = the scalic ratio) x (times) (rotational corona ÷ π) - (minus) E .... or, if my "off the top of my head" calculations are correct, at somewhere around 4km per second / per second! Whee! (That's just a guess, of course. The exact diameter of each of those wheels, disks, gears, flanges and shafts would have to be computed taking into account the potential acceleration of capacitive duractance before an accurate measure of umbilical radiation could be made.) Also, it sure wouldn't hurt if they had a few liters of prefabulated amulite - suspended in a solution of dynametric spall of course - which could be applied by a hydrocoptic marzel tube, thus reducing the ambificient resistance to a negligible number. That would likely yield best results if rectificated by using the Maynard-Kroll Longitudinal Cam Sluicing Procedure, of which I'm sure you're all familiar. (By the way, it was the young American physicist Kroll - his first name now lost to the ages - who initially applied a dilentium voltage across the special temporary clamps attached to the derrieres of over 600 particularly fulsome female volunteer test subjects, all of them student volunteers from hair style salons in China, Japan, Norway, Sweden and New Jersey. Now, I'll just bet 2 or 3 of you are thinking: What about the effect of logarithmic spurling when side felminescence takes over? Great question! In my experience, the cellular degradation of substances like tempered steel with a hardness MOH of 4.3 or less, will allow deltoid panandermic fusions to be minimized... thus cancelling subsequent fuseal modalities. I'm sure the fellows in the video considered - then dismissed (and rightly so) - the use of a drawn sinusoidal trennion. That could have applied considerable force during the early cabulation phase of their effort... but it would also have induced an unacceptable level of bi-thermal scoring on the helio-multimetric shaft... something none of us wants to see, right?! Simple really.

@welshlyn9097

Жыл бұрын

You are not wrong 😂😂😂😂😂😂😂😂😂😂😂😂😂

@daveknox6291

Жыл бұрын

"wonderful"

@bongdan

Жыл бұрын

what language is this

There is always one guy sitting around and do nothing. 😂

Got to admire the safety shoes and eye protection. That chisel should be entered for the world record mushroom growing competition. First bearing walked on so was not even an interference fit on the shaft and the second bearing was hammered on whilst still being held by the hoist, both will lead to premature failure of what will be a very expensive bearing due to incompetent fitting.

@Manufacturingvideos10

Жыл бұрын

You are right ❤️👍

Used oil goes on the floor to keep the dust down

@Manufacturingvideos10

10 ай бұрын

🤣🤣🤣

If you want that thing off the shaft then why is it on the ground where it can’t fall?

In the entrance of the shop we can read a warning sign that says ; No safety glasses or steel toe boots beyond this point

@Manufacturingvideos10

10 ай бұрын

Hmmmm

All running around in their jim-jams and not a pair of steel toe capped boots to be seen. Adds another dimension to the term "flat feet"

Eyes don't last long when unprotected while welding and burning. I've had a welding flash, and it isn't pleasant.And that was from one quick flash.

The life expectancy of a worker is probably 6 months or less with the way they are handling all that stuff. That sledge hammer and chisel is no different than a gun when a piece of that hammer or chisel breaks off being swung/hit that hard.

@Manufacturingvideos10

10 ай бұрын

Yes I agree with you it’s very dangerous task and wrong way to repair but they work with what they have and thanks for watching sir❤️👍

@bobsbillets8863

10 ай бұрын

I have a piece of metal in my leg from a similiar incident. I learn the hard way. I really wish these guys would wear some safety glasses. A bullet proof vest would be a nice addition as well! @@Manufacturingvideos10

Love those steel-toed sandals.

no anti seize grease on any threads

@Manufacturingvideos10

Жыл бұрын

Yes here is nobody knows this kind of liquid 👍🤣

I love the smell of grease burning in the morning.

It's impressive to see how resourceful these guys are in getting the job done, especially given the limited tools and resources they have available. It's a testament to their ingenuity and determination to succeed. However, I can't help but wonder if using an excavator to hammer open a container was really the safest or most efficient option. It's important to prioritize safety and consider all alternatives before resorting to drastic measures. Nevertheless, it's interesting to see how they were able to ultimately get the container open, and I hope they were able to achieve their goals. 💯👍👍

They dont have a word for cleaning and tidying. They have no concept of that, so dirt and dust and oil everywhere.

@Manufacturingvideos10

Жыл бұрын

Hehe you are right 👍

Bet them blokes knew they were swinging that thor hammer all that time lol

@Manufacturingvideos10

Жыл бұрын

Thanks for watching 👍❤️

Steel toed sandals wouldn’t help at all with the weight of the side “shaft wheels”

Always wear safety sandals!

@Manufacturingvideos10

Жыл бұрын

Thanks for your review 👍❤️

"Awesome Safety Shoes" OSHA would have a Heyday passing out fines over there.

It is the moveable jaw of a rock Jaw Crusher, the part of the shaft through the casting is elliptical

@calthorp

Жыл бұрын

Thanks, I was wondering what it was.

@grom7826

Жыл бұрын

It's a small one. At the old Kaiser Sand & Gravel Quarry in Clayton CA we had one that was 58" by 80", and it was the original crusher installed there in 1958. The flywheel and drive pulleys are 14' in diameter, driven by a 200 HP electric motor. I worked there for 20 years.

I SEE SAFTEY BOOTS BUT NO SAFTY GLASSES I SEE SEE

@Manufacturingvideos10

Жыл бұрын

Yes you are right about it👍❤️

Enough in this to give the health and safety rep a heart attack. Can't doubt their willingness to get the job done, but jeez.

@Manufacturingvideos10

Жыл бұрын

Thanks for watching and also for this comment stay tuned 👍❤️

These people are known for being careless without regards to safety. They thought as long they can do the job, safety is not a priority! 😢

@Manufacturingvideos10

Жыл бұрын

For owners because poority is very high here and workless peoples that’s why they need just job what ever if no safety’s its ok but they need money for his family’s

@katutuhanan1381

Жыл бұрын

@@Manufacturingvideos10 you said they need money for their family, so family is important for them, right?...that's why they need to be safe because if somethings happen to them, their families will suffer most.

@gibbogle9486

Жыл бұрын

They can't afford safety. This is like a factory in Britain in the 1800s.

Safety LAST! Safety shoes, hardhats, eye and ear protection plus many other safety issues disregarded. Not to worry, we have many people to take up the positions of the disabled/deceased! Wow!

Вы же вроде занимаетесь постоянно ремонтом этих дробилок? Неужели постоянные подставки не сварить? Какого хрена изделие стоит на каком то хилом двутавре и трубе?

@Manufacturingvideos10

Жыл бұрын

Thanks for your review

Please get these guys some safety boots 🥾!

@Manufacturingvideos10

2 ай бұрын

Yup 👍

Sounds like the chipmunks Alvin, Simon, and Theodore talking on this video.

@Manufacturingvideos10

10 ай бұрын

Hmmm

You better have fast reflexes in that joint, jeesh did you see that guy jump like a cat!

@Manufacturingvideos10

Жыл бұрын

❤️👍🤣

That new bearing is looking a little banged up already after the hammer installation

@Manufacturingvideos10

Жыл бұрын

Yes here is available bearings which is used old cruise ships and here is never have a bearings making factory that’s why here is just repaired bearings available

@rolluk4523

Жыл бұрын

if have on a mind, they made this bearing using just fireplace and hammer-then its ok lol

Штаны новые выдали работяге? А сварщика премии лишить.

Got some rock stars right there.

@Manufacturingvideos10

2 ай бұрын

😛

good start when you roll a bearing around in the dirt...

@Manufacturingvideos10

2 ай бұрын

👍

It's the lack of steel toe caps that really disturb me, please where steel toe caps lol

@edmundholmes7559

Жыл бұрын

Its okay, they're wearing safety sandals 🤓

Why they didnt put out the fire after plazma cuting? The oil/lubricant is burning, and they inhale the probably toxic fumes.

Its all about learning from others, using that "pecker" was a great idea. The lack of safety equipment is sad, reminds me of my starting my apprenticeship in the UK in 1964 we were issued with goggles, few wore them: no safety boots or ear protection and lots of lead, asbestos and mercury about about

@caddyrack

Жыл бұрын

David, I worked in a saw mill in 67', no ear protection, no face shield, one glove for the right hand only (don't ask why to long to explain) no safety shoes, later on they gave us a thick leather apron because the safety board came and told them well shut you down if you don't comply. I still have all my fingers but I'm going deaf. I lasted one and one-half year, some of my co-workers got hurt badly. We did not have much of safety laws, it took many years. Stay safe

@750VFR

Жыл бұрын

@@caddyrack good points, your experience was similar to mine. I now recall a lifting chain had a link replaced with a bent nail and when the safety inspector from the insurance company came round we were instructed to hide the chain. Of course those who said hide it were never near hoisted loads. I'm a bit unsteady on my legs now and my sight is poor, I wear a hi Viz jacket on country walks, it's never about doing things in a safe manner because that's what the rules say but doing a mental risk assessment and behaving accordingly. Take care.😎

The scale of this blows my mind! It looks like a pulley for a serpentine belt, and an automotive flywheel, but the men would have to be some tiny little elves! 🤪

I suspected that weld when I saw him doing it !

When shit don’t fit out with the old hammer

@Manufacturingvideos10

Жыл бұрын

Thanks for your opinion

That was Disturbing.

Open toe sandals around heavy equipment and parts? Missing toes and feet are on today's menu of workplace amputations injuries and death today.

@Manufacturingvideos10

10 ай бұрын

Agree

I thought that dirty weld was sketchy AF.