Thank You for such detailed tutorials. helps a lot in learning abaqus features and technical details in a short amount of time which would rather take hours to figure them out. Thumbs Up ...

Wow wonderful. Thanks. It's my first time to hear abaqus. But now i know that abaqus is from same company with catia and Solidworka. Wonderful it will be my favorite in no time

It's very helpful for me to learn abaqus,thanks very much!

Thank you for a good tutorial... very easy to understanding..please send to other bend test related video.

Thanks and very useful explanation for each step.

Thank you , your videos are really useful

Thanks a lot for this nice tutorial

Thank you for a good tutorial

Awesome video! Thank you!

Thanks for your tutorial. Could you please help me with the setup for springback analysis. I'd really appreciate that.

It's really helpful tutorial !! I am waiting for the tutorial on Spring back and it's compensation on it.

@chrishouston909

3 жыл бұрын

You prolly dont care but if you're stoned like me atm you can watch pretty much all of the latest series on Instaflixxer. Been streaming with my girlfriend lately xD

@orlandowesley2390

3 жыл бұрын

@Chris Houston Yup, have been using InstaFlixxer for years myself :)

Thank you for all these nice tutorial is it possible to simulate the springback in abaqus please Thank you in advance

thanks for putting this up. can you please try INCREMENTAL SHEET FORMING. !!

please make a video on springback

very nice! There is smth I want to know, what kind of changes should I make for simulation of steel, with 220000MPa young's modulus? can u help me, please?

How to re-analyze the bent part? I want to analyze the bent part under a load.

thank you so much , can you please upload the video how to simulate springback in tailor welded blanks in u bending ,that would be much more helpful in my project.

How to do for wipe bending/L-bending. Help plss

Hai sir, I am doing projet on linear friction welding, can u have any tutorials for that

The video it turns out to be very practical and usefull, however from my point of view it should be important to take into account the strain rate effects since, in some cases, the deformation of the sheet metal may take place quite fast; furthermore, regarding what I mention, the problem could be no longer considered as a quasistatic... I wait for your feedback about my comment, best regards and thanks :)

Can you explain spring back simulation please

Thanks for the informational video. Appreciated. One question, I was wondering if this analysis is modelled in 3D solid, can the Z-direction shrink induced by Poisson ratio be also calculated? and why people ignore the z-direction shrink? I have seen many analyses modelled in 2D. Thanks again for this video!

@abaqusacumen7397

4 жыл бұрын

It has plane strain condition.

I also would like to watch your springback tutorial. Seems like many people are interested in the subject.

@abaqusacumen7397

7 жыл бұрын

We will make it for Abaqus community

@avalonk9244

7 жыл бұрын

Abaqus Acumen is that spring back tutorial available now?

@shahzebarsal4106

4 жыл бұрын

Jldi bnao plz

Please upload video on tensile testing of Titanium sheet metal (ASTM E8 dimensions with 1mm thickness) with applying test speed of 3m/s and orientation of 45 degree. please! Im struggling to simulate.

can you please make one tutorial for making Forming limit curve

when I am following the steps in the video, I am getting the following error while in the run The strain increment has exceeded fifty times the strain to cause first yield at 633 points The strain increment has exceeded fifty times the strain to cause first yield at 13 points Excessive distortion at a total of 404 integration points in solid (continuum) elements Pls, Could you tell me the way to nullify the error?

sir i am doing simulation about V-bending on Aluminium narrow plate by using steel punch and polyurethene rubber for die.But i am not getting good results,getting deformation in the die and getting very high equivalent stresses.Actually having problem how to select engineering data for the die. Please sir i am stuck and would be a great help if give me some guidenece.

sir this video is so nice. sir me an u arrange one video for me i have to make one sheet of profile following equation x^2 -- y with x varing from -1to1 and y also varing from -1 to 1. then curved surface will formed and then we have to flatten the surface applying load. then simulate that how much strain is produce after flattening of the curved profile. thank u.

Hello, Thank you for this video, It was very helpful. One question, in the Contact Controls dialogue box I have set the automatic stabilisation to 0.001, however, in the interaction dialogue box for both interactions I cannot change the contact controls from Default - it is greyed out. Do you have any idea why this might be the case? I have tried going back through the video a few times and cannot see what I am doing differently. Thanks, Ben

@shahzebarsal4014

4 жыл бұрын

same prob with me

@longthanh6753

Ай бұрын

Hi did you know how to fix it now

please provide PDF documents of the videos

I can't change contact control sir 19.04

Thank you for this video but u forgot to assign section for Die and Punch can check that !

very good video, but can this software do some analysis using coining method? thanks

@abaqusacumen7397

7 жыл бұрын

Yes

sir, is plastic data of material available in any research paper if yes kindly send me the link and what is the name of the material.

@abaqusacumen7397

7 жыл бұрын

These are assumed data for low carbon steel. We don't have any reference.

AT 12:59 i couldnt see what did you write in the dimension point box !

@kubra98

5 жыл бұрын

-49,50

I need your help Sir

I can't change contact controls like 19:02. Help me!

@oussamabouacha5828

Жыл бұрын

Did you find the solution for that ? Cs I fell into the same problem

13.00'da ne yazdığınızı söyler misiniz ?

@kubra98

5 жыл бұрын

-49,50 olduğunu buldum :)

Thank you for a good tutorial