Manual Swapping my Skyline R33
Автокөліктер мен көлік құралдары
If you’re trying to do this to your skyline, I used an rb20det transmission, Ka24de clutch kit, auto r33 trans mount, manual s13 trans crossmember, s14 driveshaft extended to 51”, and an s13 clutch pedal with nismo r33 clutch pedal bracket. The pedal doesn’t fit very well so it’ll need to be modified/extended to be in line with the other pedals. You can get a manual brake pedal or cut your auto pedal like I did. GTR brake/clutch pedal pads are super cheap at any Nissan dealership. Also I used a cheapo ka/sr shifter which put the shifter about an inch too far back, so use an rb20 shifter.
Instagram:
@opehaha
@speedstavros
@kyannaki
/ user-868027421
Пікірлер: 5
What trans and drive shaft and pedals used?
@Spirta
10 ай бұрын
I used an Rb20det trans but you can use an Sr20 or ka24 trans if you swap to rb20 bell housing. I got a free s14 ka driveshaft I had extended to 51”. Pedals are s13 clutch pedal with r33 nismo clutch bracket. The s13 doesn’t fit right so needs to be modified. Brake pedal is the stock auto one just cut with a manual r34 brake pad. I explain some more in the description of the vid
did you use the auto crossmember also??
@Spirta
10 ай бұрын
I was planning on using an auto one but someone gave me a manual crossmember. You could use the auto by flipping it around but you can only use 2 of the 4 bolts.
@dominicfraire8895
10 ай бұрын
@@Spirta perfect thanks man! doing the same manual swap later this week just making sure i have it all