I could listen to Mr.Januch talk spydercos and blades all day. Love these videos.

Needs to be more ball bearing lock knives offered by Spyderco. My fave of all the locks.

@ZPositive

Жыл бұрын

I'd also love a compression lock lightweight Manix with no liners. Like a Para 3 and a Manix 2 had a kid.

@doejon9424

Жыл бұрын

@@ZPositive I would love this Manix 2 LW "Compression Lock" design as well, only *with* liners, exactly like the Sage 5 Lightweight w/ Compression Lock. That would be the "Ultimate Lightweight" in their entire LW series. The liners don't add much weight at all & you get a much more sturdy construction at the cost of one ounce, *maybe* . I value carrying my Sage5 Lightweight over my Para3 Lightweight for this very reason & the weight is hardly noticeable in pocket or in hand.. unless you literally hold both of them but it's miniscule.

The peened construction on the Manix 2 LW was the only reason I haven't bought one yet. Glad to hear about this important update.

@jojojaykay

6 ай бұрын

Same here. This changes things for me

@enriquescott2983

4 ай бұрын

Thank you thank you for the review I'm just getting to the Spyderco endurance and The Rock jock🎉

About 10 years ago bought the Manix 2 Lightweight for $68 . Great knife and still going strong 💪

@thaknobodi

11 ай бұрын

I just got the original BD1 LW in a trade. Sweet ergos

Glad to see the screws over pivots in the manix! Between this and the Military 2 spyderco’s been making good changes that the community’s wanted for over a decade.

@randystrand908

Жыл бұрын

Agree, except they went away from SPY27 in this new "screw construction" model. I'm not, at least not yet, a knife "guru" so I don't know the benefits of the new steel but I'd done enough hearing reviews to be excited about the SPY27 (plus I liked the aqua color making it easy to see where/when I set the knife down on a cluttered work surface)

My m390 manix is my main go to edc, even over my shaman and pm2. Great design, glad to see a screwed lightweight version.

@doejon9424

Жыл бұрын

s90v for me, although I like my M390 as well.

index finger choil is one of the best feature of this knife! Getting that extra leverage can make the job go much quicker/easier.

Finally. Should have been from the inception. I love all my Manix knives. Being a lefty I find its just about the perfect EDC for me. Love to see more Manix 2 Sprints. 😛 .

I have a riveted original version and it has held up very well although I do prefer the screw construction.

Wow. Thanks for all the knowledge sir. All other manix videos can go back to their boards. This is it. Its like if you put into words what I felt using the ball bearing for the first time. I couldnt describe it but I knew that was the most solid, well engineered, piece of master craftmanship I could afford. And it was very similarly priced to axis locks with much cheaper build overall. I am extremely pleased with my manix 2 full liners original black satin g10. It only gets better with time and it breaks it. 0 play. The s30v is wow sharp, feels good and extremely precisely treated/crafted. You have to compare blades in real time to truely understand it. Go to a shop and flick em' all. You'll buy a colorado spyderco. If you can afford even the entry models. 10x more worth it than a civivi/kizer/china blade. Barely the price of 2 knives. Benchmade is good but you pay 2 manix 2 to get a griptilian sheepfoot with solid scales. Not worth it. Im more of a flipper/button type, have been forever. But the spyderco hole is just there to stay. They need to expand their ball bearing lines. I would instantly buy a smaller model. If they can pull it on weights. I think for the ball bearing you need more heft to your click so to speak. Heavier metals can help. Hell i wouldnt care if it was stiff. Its the lock quality of the balls we like.

@zexnynex777

8 ай бұрын

I only buy the Goldens, but people love those Taiwan models.

I’m glad they finally got rid of those awful rivets!! I got the g10 Manix 2 because I wanted to deck mine out in copper scales but even if I didn’t want to customise it the inability to disassemble is pretty much a dealbreaker

it's about time you used screws! I'll probably get some now...

I love how well he places them back down without looking like hes about the hit the edges against the spines of the neighboring blades

I have many Manix 2 LW's and even G-10 versions.. my favorite version of Spyderco's

Every single damn question I could think of and two I didn’t even think of! I knew I wanted a spyderco, knew I wanted the manix 2, now I know which one I want. Thank you!

@randystrand908

Жыл бұрын

HaHa! Agree & well said!

Since the Manix 2 is my favorite knife, all new information about them is a delight, thank you Spyderco, it's just a question of time for me ❤

A clear favorite for me . Lightweight , regular or modded . They’re all awesome for me

I am actually giving away several of my other knives this Christmas because I am finding I only carry a few out of my collection among them being my Delica, Shaman, PM2 and Spy27 LW Manix 2. Other then a Benchmade 940, full TI Kershaw Highball Xl and TI Artisan small Arion, all of my spyders made the cut which is impressive to me considering I had knives from Civivi to Cold steel and all but the listed didnt make the cut.

The Manix 2 light weight in CTS BD1 was my first Spyderco, I got it about 10 years ago. I saw a Nutnfancy review on it and was hooked on Spyderco after that. I now have over 20 Spydercos, and slowly adding more. I actually carried that original one today. I also have a GITD Manix 2 XL, a few other light weights, and one G10 version. The Manix, PM2, and Shaman are definitely my favorite knives and I almost always have one of them with me. If I had the money I would probably have a few hundred more Spyderco knives! Maybe someday if I'm lucky!

@jacobpoucher

Жыл бұрын

lgb fjb!

@fjbforever6747

Жыл бұрын

@@jacobpoucher Yes I agree! Let's Go Brandon!

@missingremote4388

Жыл бұрын

You're addicted/ I limit my spyderco to only the Golden Colorado versions

@fjbforever6747

Жыл бұрын

@@missingremote4388 Yes I am! They are putting a huge addition onto the Golden CO factory. I was out there in May and went to the outlet store and saw all of the construction.

Thanks for this particular video. I do not currently have a Manix. Soon, I will fix that lack in my collection, thanks to this video.

Awesome! Been waiting for screw construction

Thank you, thank you, thank you! Now that the Manix 2 is screw together, it will be my radar. 👏🙌

Can the owners of the old rivets models get sets of torx/posts that we need to do what other models have been doing for years? Possibly for a discounted price??? You’ll make a good amount on such a kit!

I own 2 of the LW models with screw construction. One in CPM S110V and one in Rex 45. My absolute favorite knives. So light and ergonomic with great steel.

I adore my Manix 2 G10, such a great knife and loads of gimping very well placed for grip, the Manix 2 and Para 3 are the best knives in my collection and the entire world 💪🏻🌎👍🏻

I love the manix it's like a pocket size mule. Awesome video

Definatly will get a manix 2 with the new screws

This is a great knife for left-handers too. Other than the pocket clip, the opening hole and the lock are completely ambidextrous. Of course the clip can be flipped in a matter of seconds making it completely left hand friendly. This design is definitely a win, I have the translucent blue lightweight in BD1N and the blue G-10 in S110V. The lightweight is my work knife since it’s cheaper and the G-10 version is more for on-the-town carry.

My boyfriend bought his on Amazon the pictures showed the pin construction but he had screws he said that made him happy

IM STILL WAITING FOR THE MANIX 2 IN MAGNACUT (with screws, not rivets)

@travisworts6249

2 ай бұрын

The salt is now magnacut

And of course, now I NEED a manix 2! 😂

@randystrand908

Жыл бұрын

No kidding!😂

Thanks for the vid. About time for the screw together . Now lets get a lighter spring. I'm not weak and the spring is ridiculous. The manix is an awesome knife but way to stiff spring.

@randystrand908

Жыл бұрын

First time hearing this... When "hanging" 40' up in a tree, I don't want to have ANY difficulty opening a knife especially with my non-dominant hand... (Rarely use a knife trimming or topping a tree, but ya never know!)

I love my Manix 2. I have the full-flat grind G10 version. Helluva knife, qnd my favorite next to my Kapara!👍🏾

Interesting history lesson. BTW, the original Manix 2 LW did not have a screw-together pivot pin; I still own one. The pivot pin is not removable or adjustable.

@doejon9424

Жыл бұрын

Exactly. The whole thing was "pinned" and also, the very first ones were *not* Full Flat Ground, thet were Saber Ground. I have an original Saber Grind in s30v and then a "translucent blue" BD-1 LW.

Thank God I found out about that riveted version before I bought one. All those good steels locked up in a scale jail.

Wow, the Manix looks solid!!! Wow!

Can't go wrong with a Manix 2

Now we need Compression Lock Native!

@reaganm.8818

Жыл бұрын

Definitely! Spyderco, if you're reading this please make it happen!

@tgrzadziel1975

Жыл бұрын

It's the Shamen

Spyderco is the best. Much love from Europe fans!

Good talk really. My one ok two issues with the manix are the relief of the ball cage it really needs 2mm more height. When wet the lock becomes a two handed lock. Also please strive to get one hande actuation. Second issue g10 models have too aggressive jimping.

Hell yeah, one of my favorites 👍

l want a lock back Manix 2!!!

Ok I’m back . Got a third one of these in rex45 from GPknives and it’s so darn good . Even the frn is ok on this one adding to the lightweight design and ergos for a light weight in pocket but packing a big punch if necessary . Of the 100 s of knives I can carry I always go back to the manix 2 , pm2 , para3 , native 5 maxamet and a shaman for winter time or jeans . The lightweight manix 2 is going to be 2024 summer carry . I need to try a yoijimbo or jumbo next . Good job Spyderco team from Canfield Ohio . I hope to meet Eric and Michael some day at a blade show .

Just pre-ordered the Magnacut Salt version. Sweet!

My Manix 2 with a DLC sabre (hollow) grind blade is one of my favorite!

Just got one, awesome blade.

Screw construction is a recognition that knife people like to tinker and play with their knives, kind of like gun people, imagine that. And maybe eventually NOW that Spyderco recognized that about their clientele, the flimsy excuse of "we don't encourage amateur knife construction" as a response for a request for a replacement blade for a chipped blade on your Spyderco Nilakka, which had various people addressing that particular issue would have more thought and consideration. Not to mention an opportunity to make money and effect a resolution with the end of having a happy customer(s). A knife which has a wonderful design and purpose drive design that should have had a blade steel that was reflective of that purpose. I don't know something like a D2 or Maxamet replacement blade for a knife who's design purpose is bush craft.

@randystrand908

Жыл бұрын

Excellent comment!!!

I'd happily pay 10 bucks more for a steel bearing cage as standard. It would just feel more secure long term than plastic.

I bought a manix 2 lightweight salt version from knife center. Cpm magnacut and good hardware to match. I'm really excited to see how it perfoms when I i get it.

The LW should of been screwed together from the beginning

@CNYKnifeNerd

Жыл бұрын

Not trusting the average consumer to be able to disassemble and reassemble a plastic Manix seems like a completely fair decision, to me. Besides, if you really want one apart it's not hard at all to do. The fact that so many people couldn't work that out kinda proves my first point.

@franticflintstone7999

Жыл бұрын

@@CNYKnifeNerd Thankfully there are disassembly videos on KZread for most of the popular knives nowadays.

@randystrand908

Жыл бұрын

Dear CNYKnifeNut, if that's true, why aren't they assembling ALL their knives with rivets? In fact, The Government should step in and Make all US manufacturers assemble with RIVETS.

@michaelgeorge5197

Ай бұрын

I just ordered one not realizing it was riveted… most ive spent on a knife so far. Joy..

The first manix with the lockback is still sexy. I love my Manix 2 LW in SPY27 Spyderco gifted me ! I'd love to be able to disassemble it though.

@randystrand908

Жыл бұрын

Agree. Maybe there is a way to replace the rivets with the screws? Should I break out my shop (floor model) drill press?!!!

@ramonade_knives

Жыл бұрын

@@randystrand908 You can yes ! There's even a "conversion kit" that was sold in the USA for it. In Europe it's just hard to find things that aren't in metrics system format lol

@randystrand908

Жыл бұрын

@@ramonade_knives Great info! Thanks, Robin.

'leader in the industry using exotic blade steels,' yeah you are.

Great video! I’m bummed that I’m a tip down carry. I’m waiting for the mini yojimbo.

Very cool to see the evolution of these awesome knives. I wonder if the hardware will be available to retrofit riveted models.

@cristobaltorres6185

Жыл бұрын

Great question…!

I'll be all over a Manix 2 Wharncliffe, if you build it.

Amazing video and Amazing knife

I love mine

Ive been wondering about why it was called Manix 2. Like... what about Manix 1? Is there any? 😅 NOW I KNOW! Great video and thanks for the answers!

I've had a maxamet lw for years and don't really carry it for a number of reasons, mostly maxamet rusts when you look at it and on my personal knife the action and detent are very stiff and unserviceable/un-tuneable. I may shoot spyderco an email and see if they could convert my knife to screws, then I could put it in rotation.

@randystrand908

Жыл бұрын

Great idea. I'm in the process of returning a Benchmade Presidio 2 for the Manic 2 LW, but now you've got me worried about it's ease of opening, too! THAT was my issue with the Presidio 2 - very difficult to open & close left handed... I have XL hands but the handle seems a bit too long for my (uncoordinated?) left hand.

My dream knife is this and the Manix 2 XL. How do you pass up a blade tough enough to be heavy duty but a blade thin enough to razor slice tomatoes.

@randystrand908

Жыл бұрын

Also, ease of sharpening!! (At least in the SPY27 models)

I’d love to see the wire clip on your G10 knives, especially the Manix 2 and Paramilitary 2.

@matthewjarrod2523

Жыл бұрын

No, don't like the wire.

Manix 2 and / or Manix 2 lightweight with Magnacut when? Bought the S30V Manix 2 for my brother and fell in love with it, unfortunately it was his birthday and not mine, but mine is coming up and Magnacut Manix 2 would be the perfect knife in my opinion.

@travisworts6249

2 ай бұрын

Manix 2 lightweight salt is now in magnacut. Best price is from knife center

Manix 2 LW is the GOAT.

Please make them in Magnacut steel and titanium handles.

A lot of interesting information. I was unaware that SPY27 was derived from VG10. I wish he had gone into the performance differences between the two. I do know the edge retention is better on SPY27.

Is the screw together version available for purchase yet?

@nickm212650

Жыл бұрын

It appears to me that Blade HQ has a screw together version on their website. It’s the black-out version with CTS-BD1N steel. All the others appear to have rivets still.

@OnlyGamingClips

Жыл бұрын

Yes, I picked one up in February. I didn't even know it was going to be the new model but I noticed that it was screw together when it came in the mail. I'm looking into getting a Flytanium ball cage lock, and some black screws to make it look a little nicer.

Excellent!! I need a few 👌🏿

And it’s human sacrifice sharp. Love mine.

I hope they bring back the Bolt action lock! Maybe in a Sage 3 lightweight?!

Lil' Manix would be a beautiful thing

Bought 2 all black screw together construction versions and both came with the scales cracked out of the box. Only time I’ve had an issue out of around 120 Spyderco knives I’ve purchased over the last 3 years.

Spy27 = PM-VG10... I had no idea, thanks for the insight. Everyone always compares it to the standard S30V/S35VN/S45VN, never knew VG-10 was the base for it

Manix G10 very very very very best

Ooh we need an Ultem version to show off the lock mechanism in its full glory😂

…. and the Ti frame lock flipper Manix a.k.a the Domino.

@dionflorio9249

Жыл бұрын

Love my Bento Box Domino . They should bring it back but this time with a stiffer detent.

Should offer a trade in for Screw models from factory.

Please bring back the magnacut mule team

Now add the Salt with a MagnaCut blade and screw together construction and you have a sweet knife 😊

i wish they'd give the Native 5 all the different steel choices the Manix 2 gets

I really enjoy my Spyderco knives, but what I've learned from buying some of their "lightweight" models is that is code for "made cheaper".

Great video !

Mine has the Rex45 blade. Wow

Manix 2 lw the best

finally

I want a hollow grind manix again!

There is no way I'm buying a knife I can't disassemble. Those rivets are deal-breaker. I EDC the Manix 2 S30V all black (deep carry clip and metal cage).

Great in-depth info but the intro and outro is uncomfortably louder than the rest of the video.

Quick question, are the two injection molded handle halves for the screwed construction model the same parts as the injection molded halves for the riveted construction model? I know those rivets have a very small OD, and I'd guess you need larger holes in the FRN/FRCP to accommodate 4-40 hardware.

@narkfly

Жыл бұрын

Based on homebrew conversions I've seen folks upgrading their own Manixen from peened to screwed hardware: I'd wager you're correct, likely different scales to accommodate the larger diameter screw attachment.

@randystrand908

Жыл бұрын

I can't wait for my Manix 2 LW to arrive & my first task will be exactly this conversion.

Now i really gotta get a manix 🤣

Probably still wont come apart with all that loctite. Jokes on us I guess

Can we get all the light weights with the screw construction.?

the question now is... can i drill out the rivets in my old translucent blue manix 2 lightweight and use the screws from the new models and bladeswap?

Will all lightweight Manix 2 transition to screw together construction?

Mini Manix please!!!! Although the size is good, the lil native just doesn’t do it for me. I want a thinner blade with the ball lock! Please!

Well damn... I want one now lol

Wish they'd bring back the original

When will Manix 2 Salt be available?

Pretty Please with a spyderco on top add on a flipper function 🙏

Красавцы 👍😀

Where are these screw fastened knives. I've never seen one and even the lightweights on the Spyderco website show them all as pinned.