We all know Sam is a cracking builder, turns out he's a pretty natural host for his first shot too

You really can't go wrong with Makita. I've been using their tools for over 45 years.

@patbird9694

5 ай бұрын

Same. Unlike Milwaukee

Key to these tools regardless of brand is the blade good blade on them makes all the difference.

I have the 18V DCE090. I’m a landscaper, it is a great tool. You don’t have to worry about battling with a 2 stroke engine, it is so lightweight, quiet, it feels like a very safe tool to use. The batteries will run out after only a few cuts but if you have the 18v system already, then just be sure to have additional batteries and a charger on site.

You are not wrong Makita is the Best and I love Makitas I have most of them and I have first cordless Makita drill and it's still works but the battery not charging at the moment it's old more than 20 years and I can prove it to anyone I bought it in 1998 it cost me £498.98 at that time 👍

I’ve had one of these since may 2021. Nice tool for certain jobs but doesn’t replace a petrol saw

@SJWardBuilders

10 ай бұрын

I fully agree! I think for a roofer cutting tiles its perfect!

I have one , get one its a game changer and for portability buy the makita water pressure container so no hose pipe needed to minimise dust , it eats the batteries and as advised in the video have a good few to hand i recommend 5 amp or 6 amp models for best results but 4 will do fine

The thing i like about battery tools you can just pick them up and go no messing about trying to start them or you get them going and then it stops again.

Thank you. A great little presentation. I'm glad it's brushless. I have mostly brushed tools and they gobble up battery like nobody's business. I still think this tool went through battery power a bit on the fast side. But I'm tempted, even though I'd rarely use it!

makita all the way! great tool to have, use it over my stihl 99% of the time.. Best thing i did tho was buy the battery dewalt saw diamond blade for it. Cuts nicer, thinner, last longer on batteries too

Had one of these but dewalt and slightly smaller. It was absolutely shit hot, my favourite tool. You have to have at 3 batteries and ideally 2 chargers. But they're so convient. Just cut blocks with a bolster and save battery for stone.

@henrybacon4622

Ай бұрын

I preferred the dewalt one over the makita, both very handy tho

Good tool. I use another brand of cordless here in America, which will remain nameless, and I have several tools that will take as much from a battery as it will give. one in particular is my sds-plus hammer drill. I had 1" x 12" masonry bit on it drilling through hard polymer modified cement and the load is so great the battery would get real hot. That's very detrimental to the battery longevity. If you use your battery tools for a trade it might not matter so much with a lot of battery turnover, but for other people you can directly control battery life by paying attention to tool load and battery heat. You can switch batteries out as they get warm to spread out the wear. as a note even my corded hammer drill did not have a much better time going through that stuff

@cuebj

10 ай бұрын

I always build up from small, 6mm or 1/4", sometimes smaller if substrate is liable to shatter like our 100-year old London sewer bricks.

@peep39

10 ай бұрын

@@cuebj a difficult job indeed! Thanks for replying.

I have one and rate it, even better with 6ah batteries. Doesn't matter how much water suppression you use you still need to wear a mask. Silicosis is a killer

I'll stick with my Milwaukee M18 FCOS230 (Fuel Cut Off Saw 230mm). As a bricklayer, my partner, and apprentice, both have the Makita version. Both recognize that my 12 ah, 18v battery packs more grunt. 😊

Agree it is a quality tool and does this job very well. I use 4 different brands for screwing and actually each of them have specific qualities for the different repetative tasks. Makita for me is the medium strength, great for light drilling and fits even a 1mm drill and 2nd in screwing. Only down point so far is the short life span of the batteries however you can replace them quite cheaply. The Milwaukee is the beast, best for fast drilling 5mm or larger and ony for heavy screwing like 6mm * 120mm or larger. The bosch easy drill is light in the hand and super stable slow drive is the best screwer for upto 6mm*90mm. I have a different impact screwdriver and the test on skillbuilder proved that for the 120mm screws in dry oak the Walt was the best and Milwaukee great as well and the Makita just good enough. So Makita is very good alround however every job might need the tool with the specific qaulities of that tool to say which one is the best.

If ever a tool was an advertisement for a DIYer to finally get a proper pair of workman's safety boots, this is the tool 🙂 Looks very effective

Found myself having a look at these and safe to say after seeing one being used it’s a must have. I use makita products already but I can’t be bothered battling with 2 stroke one minute it starts next it doesn’t. Need reliable tools in the trade.

I've had the DeWalt for about 5 years, 9 time's out of ten I'm using that the petrol hilti stays in the van

i’ve had the stihl 9” cordless for a couple of years now so much easier to use my only issue is it hasn’t got the battery cover like the makita and dewalt

Makita fan here 🙋

Add a couple of 6amp batteries for longer cutting power

Was that last cut on sheet metal? If so I didn't know them discs worked on just metal, I know that they will do the odd reinforcing bar.

Thanks, looks like a great bit of kit if you're on the system already, or making a change !

Makita are great tools ( I have many of their products ) but their replacement parts are ridiculously priced ! Also the easy availability of replacement parts needs to be addressed ( the same with Dewalt )

Makita is the best.

@SJWardBuilders

10 ай бұрын

Yes mate!

@johnthumble5154

10 ай бұрын

Best tools for diyers 😂

Makita for life😂I have the chainsaw but if you got access to power for low level no point

Awesome. Even managed to cut through your shoe!

Rotate batteries all day long? Will the batteries like that. They are aswell probably worth more than the tool.

With you on this Sam, great pice of kit

Great review Sam. What’s next on your makita list?😲

@SJWardBuilders

10 ай бұрын

Thanks Dan. Im open to suggestions for any power tools! l love them all!!

@Ultimate-roofing-square.

10 ай бұрын

@@SJWardBuilders winter is coming, what about the makita microwave.. warm some soup up. 😋

@SJWardBuilders

10 ай бұрын

@@Ultimate-roofing-square.I could make a space for it in my truck, if things go quiet we can double as a mobile soup kitchen! Sam's splendid soups

@burwoodbuild

10 ай бұрын

Sounds like the Makita fan boys are having a love in! 💙🖤🥰😅

Could you cut through a single leaf brick wall with this? I know the max cut depth states 88mm but it looks as though it would get through a brick. I've been looking at this for things like garage conversions and installing windows.

@SJWardBuilders

10 ай бұрын

You could but it would leave a slight nib at the back of the cut like a corded nine inch cutter does. However it is then very easy to take down the wall once the first couple of bricks are removed with a hammer and chisel/ bolster.

I'm waiting for Makita to release the 40V version of this saw.

@burwoodbuild

10 ай бұрын

I believe the 40V version is available now in the UK… going for just under 1k. Absolute beast! 😅

@TheToolnut

10 ай бұрын

@@burwoodbuild That's a 14"/350mm saw as far as I know. I'm waiting for the 9"/230mm 40V version.

@burwoodbuild

10 ай бұрын

⁠@@TheToolnut Yeah, was 80V (twin 40V) MAX XGT saw and was similar size to my Stihl saw. The one you’ve mentioned sounds more manageable… assuming it’s a single 40V MAX XGT?

Damn that looks fun

With the water hose needing to be attached it makes the cordless cutter obsolete, might as well have corded

@SkillBuilder

10 ай бұрын

You don't have to use water for dust suppresion and you can get a pump up spray bottle that will last for ages. You need only a tiny amount of water.

Anyone know please if other brands do similar water-fed tools for cutting stone and likes? cordless or corded even

looks awesome

I'm just curious. Are the people in the UK taught to say "bat-tree"?

@SkillBuilder

10 ай бұрын

Good point. We will send all our builders away for elocution lessons. There is no worse English than that spoken by the natives.

It's really light... Then puts the batteries in 😂 still good though

All Makita cordless tools are toys 😂

@SJWardBuilders

10 ай бұрын

Ouch!

How can i buy that Makita wall plaque.

@SJWardBuilders

10 ай бұрын

I can make you one!

@kevinn2216

10 ай бұрын

@@SJWardBuilders +1. I wouldn't mind one. I'm struggling to get those red Makita gloves. Not sure they make them now.

Thanks for the informative vid. What is the blade you are running on it? I would ideally want to be able to also cut rebar lintels. Can an angle grinder blade be run in the DCE090?

How much does it cost to charge a battery per Ah?

@trs4u

10 ай бұрын

Depends on the nominal V of the battery and efficiency of the charger. Multiply the V by the Ah "Ivy Watts" and divide by 1,000 to get UK billing units *if everything is perfect*. It isn't, so add a bit for safety. 1:42 he's using 5Ah batteries @ 18V so one would take 5 * 18 = 90 / 1,000 = 0.09, about a tenth of a unit. I pay about 30p per kWh, so about 3p per charge, or 6p for 2 batteries. Elsewhere he says he used 6 batteries for something, so 20p ish? It sounds about right. If you were using a corded 1kW (1,000W) model and spent 3 minutes cutting through something huge, you'd have used a twentieth of a unit of electricity - 1.5p

@I-am-not-a-number

10 ай бұрын

Thank you. 110v every time unless you are using someone else's power.@@trs4u

@m2dat791

10 ай бұрын

Always charge my batteries off the customers power

@trs4u

10 ай бұрын

@@I-am-not-a-number Oh yeah derp - I only do DIY, never even seen a 110V powertool except (now I know) when we've had someone in to do major work on the house. ... reads ... so that's why they bring a transformer! I thought it was just for isolation... every day's a learning day. The V and Ah in the battery charging answer is good no matter what your power supply. You'd have to go looking for the A on a corded tool - for those, the power in W is all you need to know. A 1,000W power tool will spend money at the same rate whether it's a 110V or 230V model.

@trs4u

10 ай бұрын

@@m2dat791 It's a tiny amount of energy - one of these batteries is about a hot cup of tea. I was going to joke Makita should make a kettle, searched, and see Screwfix has one. If the customer has an 'agile' tariff, you could be paying them!

If your having to charge batteries why not just use a plug in cutter then you have hundreds of cuts, just a thought.

@SJWardBuilders

10 ай бұрын

Running an extension cord isn't good if you are on a roof or scaffold!

@SkillBuilder

10 ай бұрын

kzread.info/dash/bejne/mXWYmNt8Y6XTZbg.html

@mc1703

10 ай бұрын

​@SJWardBuilders if you are running water to it then a cable is no worse

@SJWardBuilders

10 ай бұрын

@@mc1703 True but I wouldn't think about running a hose up on a roof that isn't fully water tight!

@redleather100

10 ай бұрын

Not good for a block paved driveway.

Battery power is the future… unfortunately touching anything Makita brings me out in a nasty rash! 💛🖤

👍👍👍

Our Milwaukee MX fuel 350 saw will do that post in one pass 😌😉🧱👍🏽

@1255XL

10 ай бұрын

Milwaukee 'small penis' boy spotted

@SJWardBuilders

10 ай бұрын

Yes I've heard that is an awesome tool but for those of us on the Makita platform it would cost a lot to buy the tool, batteries and charger!

@johnthumble5154

10 ай бұрын

​@@1255XLMakita cock watcher spotted