Your videos are simply great. I learn a lot and I learn things that I didn’t know to look for. I’m switching from Makita corded tools to cordless and this is really helpful. Thank you for your videos.

Thank you for this great, in-depth, review. I really enjoy your comparison reviews due to how the results are based on facts not opinions.

Makita tools especially their cordless tools are far superior in every way to Default I mean Dewalt.

@_P0tat07_

Жыл бұрын

At least us Dewalt users aren’t disgusted by the color of our tools 😅

@pope_13

Жыл бұрын

@P0tat07 Hahaha yeah because dog piss yellow is a color to be proud of😂🤣. I couldn't care less about what color my tools are. As long as they are dependable, durable, and powerful enough for the job!

Great planer Rob !! Looks well built Been using a Bosch for some time now In my renovation jobs, electric planers have become as important as a hammer

Very nice review and information on the makita 18v planer Good work Rob

Really enjoy your videos Rob

I have a lot invested in Milwaukee m18 line but, with them raising there prices on almost everything and the far to expensive price there putting on there new releases I'm really thinking about going to another brand for all new tool purchases and Makita is where I would go. I had a commercial millwork shop many years, long before battery tools even came out and had many brands of electric tools back when Porter Cable made good quality tools that lasted and Makita were also good. They were the first to come out with there 70# 14" miter saw, almost 40 years later I still have the first one of those miter saws I bought , the brake has been replaced a few times and the brushes but it still works good even now. I sold a lot of stuff back when I retired but Makita tools are very good quality and really last if maintained a little bit.

Having a good brake does not eliminate the need for the safety foot, on this planer or any other. It’s main function is to protect the planer’s blades from damage and chipping when setting the tool down. Regarding your difficulties and complaints with the dust port system, page 12 from the user manual: “Chip discharge direction can be changed to the right or left. To change the direction, pull out the stopper while turning it slightly backward.” They even have a big picture with arrows showing you which ways to turn and pull. Hopefully you guys won’t Chip any more fingernails.

Thanks Rob for another great review, I trust and value your opinions!! 👍👍

I'd like to see Milwaukee release this type of technology. Looks like a great planer.

GREAT STUFF KEEP IT UP

I still have the first Electric planer makita came with and it still works fine.

@N1rOx

3 жыл бұрын

the 1954 model? how much does it weigh lol

@BaconDanish

3 жыл бұрын

Fatal - ***hand planer my dude, HAND planer... 😂😇 Forgot the ✋🏻🤚🏾 sorry.. 🥴☺️

Would love to see a comparison between this makita vs the dewalt 20v vs the Milwaukee m18 model vs the ryobi and rigid

I've been using a corded Makita planer with the same type of chip stopper for several years, and I twist to release the stopper when changing sides. It does feel a little odd at first, as though you might break it, but in actual fact it's fine, and nothing to worry about. Great review. Keep up the good work as always.👍

The foot also protects the bottom and blade from damage. Because scratches on the tools shoe and chips in the blades can ruin your project. I hear the guy from VCG say that he has circular saw just for work finish wood, which I adopted, because I think it’s a great deal idea.

Great videos Thanks

I like that you can send the chips in either direction. I wish the tool had zero clearance on one side. There are times you need to plane in a corner or make rabbit. I think Festool is the only planer that will do that now.

@RB-tm6ui

2 жыл бұрын

Triton have a budget unlimited rebate planer. It's a bit of a dog but is the only other one I know for unlimited rebating. Actually I think there is a GMC copy also.

Of all the tools I've used in Timberframe and finish carpentry, Makita has by far the best quality fit and finish and smoothest "feel" comparatively to other brands I've used when it comes to planers. Also, to my knowledge, Makita is the only manufacturer of the monster 12 1/4" hand held beam planer and curved shoe. The Dewalt has a very good battery platform and huge power but, after using their 3 1/4" cordless planer, it feels like a fisher price toy compared to the Makita. Rob you guys gotta do a cordless planer head to head!

Great review man!

@ConcordCarpenter

2 жыл бұрын

Glad you enjoyed it!

So funny! I was just looking at this tool.

i wonder with the aws stuff how hard it would be to take the transmitter out of one of the tools and build it into a key fob style thing and use that to turn the vac on and off. kind of like the dewalt flexi volt vac

My first experience with Makita were some cordless tools from the 90s and I was very disappointed. Due to your review, I purchased their track saw and I could not be happier. It’s everything you boasted about and then some. I’m really impressed with this review as well so I just might have to go shopping.

@ConcordCarpenter

3 жыл бұрын

Thats nice to hear - happy to help

another great vid

Great video

Please make a review comparison on all major brands battery planer. Thank you.

Anyone know if this brushless planner will work with a de Walt battery and adapter

Thank you

Great review as always. Im from the the U.K. . Makita still haven’t released an mclass cordless dust extractor. Are they available in the United States 🇺🇸?

@hartleymartin

3 жыл бұрын

They have them here in Australia. The two I have been looking at also double as Wet-and-dry vacs, but they are about the same price as the Festool Midi M class dust vac.

Could the AWS system work with a Festool vacuum? Thx

Do you think this tool can handle a residential shim n' shave?

You talked about the tab on the dust port maybe breaking off over time is the tab on the planer body or on the part that gets removed great reviews by the way .also what's your thoughts on starting on the Makita 18 v platform am I to late is it outdated due to the 40v coming out

@ConcordCarpenter

Жыл бұрын

Stil intact, but I put the tool in a dedicated sustainer to protect it I’m thinking of jumping up to the 40v platform soon and putting the 18v tools in my other van

Rob does the aws system work with other brand Bluetooth vacuums? Great reviews 👍

@ConcordCarpenter

3 жыл бұрын

with an adapter

@ConcordCarpenter

3 жыл бұрын

No not non-Makita - but you can use the adapter

When do we get a cordless planer shootout :P I think cordless planers are such under-reviewed tools. Especially comparison videos.

@sadiporter2966

3 жыл бұрын

All the others can only manage up to 2mm. This can do 3mm in 1 pass.

@hartleymartin

3 жыл бұрын

Ones of these would be handy. I'm still using a Stanley No.26 circa 1893-1899.

@RB-tm6ui

2 жыл бұрын

Glad to hear you've moved on from the stone.

We’re I get the collector and guia

If only I could afford to get all these cool tools, I’d never carry an extension cord again.

@mikeg6633

3 жыл бұрын

I hear ya. For now I'm working the shit out of my inverter.

@rkfarmranch8214

3 жыл бұрын

Home Depot credit card...spend $300, they give you 6 monthly payments, no interest. Even though I’m not a big fan of Home Depot, this is a good option. On the first purchase using their credit card they give you 10% off the entire purchase also.

This is a pep talk and a review at the same time.

Chamfering looks quite wobbly, though. And judging from the video, those groves do not "hold" the edge that well. It looks like a case of speed over precision, when comparing to first tier handplanes.

@ConcordCarpenter

3 жыл бұрын

Immanuel Kuhrt I could have been more precise, they am Leo have a guide accessory

I guess no one sets these up for accuracy, they seem to only be used for large, hacking passes. I found one shipwright who actually had used the tools and showed how to set them up so they cut accurately. He said most of the depth adjustment mechanisms made the planer cut one side more than the other. Maybe I will have to buy one and be ready to return it if it can't be accurately adjusted. For this much money, I would think people wouldn't just be using this Makita as a hack tool.

Is this planer still your goto planer? I'm looking for something to help flatten out bumps in subfloor before laying actual floor. So far ryobi and milwaukee cordless planers lasted only a few days during a big project with especially warped subfloor. Ryobi was especially bad because it doesn't take heavy duty blades, and the whole thing eventually just shattered. Milwaukee takes big blades and was doing a decent job with those, powering through really bad uneven ridges and occasional nail here and there until it completely seized on day 2 due to being pushed too hard. We also have a corded makita planer and it's great and has been through a lot and still working like a champ. But I don't like the lack of electrical break and just in general would like to eventually find a heavy duty cordless option that can take the extreme abuse flooring guys put their tools through. Thanks.

@ConcordCarpenter

3 жыл бұрын

Yes it is

@reddawgrup1779

2 жыл бұрын

Sounds more like a job for a floor sander

What's battery power like? Does it go full strength till dies? How long does it last? Thank you

@_P0tat07_

3 жыл бұрын

Lithium batteries will run full bore until dead.

@steverone7623

3 жыл бұрын

P0tat07 I don’t believe that to be true. I can tell my battery life on certain tools just by sound. Or if someone is using my saw I can hear that it’s time to change the battery

@_P0tat07_

3 жыл бұрын

Steve Rone well there is some drop off but nothing like the nicad batteries had.

twisting the dust thingy is how you remove it, same as the corded one they last forever

@ConcordCarpenter

3 жыл бұрын

fradd urghh im not sure that’s a good thing - twisting plastic? What happens on a Cole February day?

I purchased one these a month ago but I am returning it because it did not have a bevel fence. I do a lot of doors and like to bevel the edge of the door, but with no bevel fence I can't do that...So back it goed

@devonwainstein9188

3 жыл бұрын

Ew..use a hand plane. Takes 1 swipe

I wonder if Milwaukee will come out with a planer?

@ConcordCarpenter

3 жыл бұрын

153259 they have one

Нормальный рубанок

How is the A/C Milwaukee planer?

@JST4CYL

3 жыл бұрын

@@gerhardschulzy- That's disappointing! I've been brand loyal for the most part because of Milwaukee always being a top contender. But may change.

Just orderd one. 1396 danish Crowns, that will be 222 us dollars (without taxes).

@TheToolnut

3 жыл бұрын

How are things in Denmark?

@TheToolnut

3 жыл бұрын

@Leopold In Denmark??

@TheToolnut

3 жыл бұрын

@Leopold I wouldn't know, I've never been to Denmark. B.L.M are communist scum and should be liquidated.

@koda0004

3 жыл бұрын

@@TheToolnut Fine THX

nowhere can i find the dust port dimension... 1" - 1.5" - 1.75"??

@ConcordCarpenter

2 жыл бұрын

I’ll measure it for you

@natesroomrule

2 жыл бұрын

@@ConcordCarpenter sweet I was just gonna buy rocklers hose kit which has a flexible mouth, but it would be nice to know. Also I didn't mean that you didn't measure it but nowhere online on makita's website on other reviewers did they ever tell you what the dust port measurement was

@user-vf7gj3my9z

Жыл бұрын

​@@natesroomrule 45мм внутренний диаметр,50мм наружний

I prefer the older brushed model.

Can you do rebates with it?

@ConcordCarpenter

3 жыл бұрын

yes

@bricemadden5717

3 жыл бұрын

@@ConcordCarpenter thank you....i though so, on the old one you cannot....looks like i need to sell it off and upgrade to this one. Thanks Rob!

Makita are great, the majority of my cordless kit is makita but they are so, so far behind with the batteries.

@TheToolnut

3 жыл бұрын

The Makita 6ah batteries are excellent, 👍😁🔨🇮🇪

@benchippy8039

3 жыл бұрын

TheToolnut they are, and remember, most of my tools are makita, I rate them above the competition but they are lagging on the high capacity battery market

@TheToolnut

3 жыл бұрын

@@benchippy8039 Have you bought into the Makita 36v platform? I have the blower, the 7-1/2" chop saw and the track saw. All superb tools, 👍😁🔨🇮🇪

@benchippy8039

3 жыл бұрын

TheToolnut you mean the 2x 18v? Yeah I have the track saw and circ saw. I’m not dissing makita, I just feel they’re missing a trick with batteries

@TheToolnut

3 жыл бұрын

@@benchippy8039 The Makita 36v brushless tools are comparable with the Dewalt flexvolt platform. The beauty of the 36v platform is that you don't need to buy a new charger and batteries. Makita have just released a 40v platform, looks interesting, 👍😁🔨🇮🇪

I found my ryobi cordless is perfect for on job site work.

@mr.c6674

3 жыл бұрын

Okay. That's nice. My Acer laptop does nice on job site. Neither of these have anything to do with this review of the Makita.

@POLOLOUS3

3 жыл бұрын

@@mr.c6674 I kept it pretty vague. I find there are certain cordless tools (router, planer) that don't require a premium price from Makita, Milwaukee, Dewalt to perform the work you would put it through. Ryobi cordless planer is one such. It doesn't bog down and offers all the premium functions this Makita offers. That and it is a close clone of the M18 planer.

@mcaudery

3 жыл бұрын

The ryobi planner is a very odd size. And their warranty dosn’t cover trade/commercial use.

makita batts need major upgrade

@timoschulz8910

3 жыл бұрын

@Leopold i think he means 18v batteries with more amps

@thomasmoorhead42

3 жыл бұрын

Why?

@mcaudery

3 жыл бұрын

Yep why?

@TheToolnut

3 жыл бұрын

The Makita 6ah batteries are excellent.

@ConcordCarpenter

3 жыл бұрын

solar man the 6ah is a great battery

Its kind of ironic to see a cordless tool pluged into a vacuum hose...just use a cord while your at it. Im kidding, of course but it looks funny to me. I have my share of cordless tools but i feel like the push by manufacturers for us to "cut the cord " is a bit if a scam. Their mark up on the batteries is so high that i feel THAT is their real motivation. I have corded tools that have had little more than the cord replaced after years of abuse. Yet after a few years i have to replace all my expensive batteries because the tools dont work as well as when the batteries were new.

@mr.c6674

3 жыл бұрын

I get your point, but consider the cost of knockoff batteries. They are indeed less money, so you can buy those instead. However, you may not get the same durability and longevity of the OEM. So to me, that says something positive about the batteries made by Makita, DeWalt, etc. You're spending money on a consumable that will work without issue. Another thing to consider is we don't know what their markup is to say it's high or not. I'm not arguing against your point because I've had the same thoughts about Gillette Mach 3 replacement blades. So much so I was on a 3-5 year hunt until I finally decided to go old school with the double edge razors. I LOVE them and have saved hundreds of dollars. Though I won't be going old school on these tools and do it by hand 😀🥴

@mcaudery

3 жыл бұрын

I have makita batteries that are 9 years old that run things fine. Other brands don’t have volt drop protection. Which people don’t understand until your batteries are getting on with age.

@timbarry5080

3 жыл бұрын

@@mcaudery thank u. I have older batteries (not 9 years old) that work fine too., until i put on a 4" hole saw or have to drive a 12" timber loc. My cordless circular saw works fine till i have to put it on a 45 an rip a long board. Thats when you realize they cant do what they used to. Id be shocked if your 9 yr old batteries can still perform. Maybe they can. That would be awesome.

@timbarry5080

3 жыл бұрын

@@mr.c6674 thanks for the ideas. I just keep my cordless collection to a minimum and cry like a man when it is time for new batteries . Everyone is different but personally i dont need cordless routers, planers, niter saws, hell, i still use my corded (American made) tiger saw.. its a beast and i dont think I've so much as blown it off since it was new..

@timbarry5080

3 жыл бұрын

@@cmmartti cords can be a pain at times for sure. But knowing how to use the cord while routing or planing or cutting long boards is an art unto itself that i kind of enjoy. The only time cords really bother the shit out of me is when there are multiple cords overlapping and going every which way. But i dont let that happen too often. That being said i would instantly replace my cordless 61/2" circular saw that i use for random cutting if it broke or got stolen .

nothing about the main thing, the blade.. is it still these thin small blades, or is it a big blade you can work yourself when it gets dull. maybe show the product up close like the cylinder and the blade etc.. so the viewers at least can relate and see it for themself instead of this shill-humping.. Ur job is not to sell this product, but hopefully, give your viewers a transparent insight they can make a decision on..