Making the WORST Turning 7x7!
Ойын-сауық
I apply a variety of terrible mods and excessive lubricants to a 7x7 speedcube in order to turn it into the worst cube imaginable!
Watch the fully 7x7 solve: • Solving the World's Wo...
Worst Turning 3x3 Cube: • Making the WORST Turni...
Use discount code "z3cubing" for 5% off everything at TheCubicle.com! www.thecubicle.com/?p=HJMGVPebP (Affiliate Link/Code)
Video Music: "Smile" by Beau Walker & Jurgance [FTUM Release]
• 🏝 Upbeat Summer Vlog N...
Outro Music: "Ruby" by Jim Yosef and Alex Skrindo [NCS Release]
• Jim Yosef & Alex Skrin...
Merch: teespring.com/stores/Z3Cubing
0:00 - Intro
0:42 - Reversing Magnets
2:00 - Time Lapse
2:32 - Initial Results
3:30 - Screws & Springs
4:47 - Worst Sounding Cube?
6:00 - Lubrication...
10:27 - Conclusion & Solve
#RubiksCube #cubing #Z3Cubing
Пікірлер: 776
I think the reversed magnets and absurd amount of lubes counteracted each other. The magnets want to push apart while the copious amounts of lube made the pieces stick to each other.
@Z3Cubing
Жыл бұрын
That's probably true!
@Nameless_372
Жыл бұрын
Lol
@mohamedazadabdulrahman3226
Жыл бұрын
@@Z3Cubing Remove the corner-cutting!
@thegappleapple7763
Жыл бұрын
@@mohamedazadabdulrahman3226 you can’t do that without replacing the pieces
@xtremecubing5815
Жыл бұрын
Smart
The only thing I can think of to make this turn worse is by adding sand or dust or something to grind up the internals
@mdmia5082
Жыл бұрын
Just superglue it unsolved
@austinmills8984
Жыл бұрын
Should just heavy grit sandpaper the internals of the pieces.
@thegappleapple7763
Жыл бұрын
@@mdmia5082 my favorite lube, glue
@WhymeR
Жыл бұрын
@AdolfHitler43 🤨🤔
@entitypolyhedron
Жыл бұрын
@Adolf hitler bro is going to have the best youtube career
At 7:01, the way his hand shakes so much trying to get Celeritas A out of the bottle is how it feels being weak and trying to get Adheron Heavy out of the bottle.
@ceqell
Жыл бұрын
what
@fernando5633
Жыл бұрын
@@ceqell it’s the name of the lube
@bensoncheung2801
Жыл бұрын
222nd 👍
@JanineH86
Жыл бұрын
lol
@CIG_AND_FORTSI
Жыл бұрын
W T F
When he started lubricating the cube it literally felt like he was using all of the health items in his inventory at once
@bensoncheung2801
4 ай бұрын
One hundred and forty four P thumbs
@banana-19_
Ай бұрын
that almost mad me cry when he removed the spring
1:31 I love how he casually says “let’s take out a knife”
@namyak-bf9od
Жыл бұрын
comment in case anybody was prepared to ask me if they asked fun fact: my friend stabbed out the camera on his phone using a knife like that
@12-343
Жыл бұрын
That’s not really that strange.
@imselfaware419
Жыл бұрын
@@12-343 Ikr, that's how you know most internet users are too young, they hear "knife" and burst out laughing.
He knows how to reassemble a 7x7. He knows too much.
@watermeloncat987
Жыл бұрын
CubeRazn doesn't even know How to reassemble a 6×6.
@hyperjanny1510
Жыл бұрын
i could do a 21x21 (moyu)
@sofiamn_05
Жыл бұрын
It's not that hard. A 6x6 is way harder.
@sheepcommander_
Жыл бұрын
@@sofiamn_05 fr?
@keithamaya8713
Жыл бұрын
@@sheepcommander_ yes
Next time you should definitely try adding something mildly abrasive in there like toothpaste or buffing compound, as well as something super sticky like honey, soda, or Elmer's glue! That would make it the stuff of nightmares!
@Lackidaisical_Doc
Жыл бұрын
What about graphite
@bensoncheung2801
4 ай бұрын
Forty two thumbs
If dollar store 7x7s ever exist, I'm sure that they won't come close to how bad this 7x7 turns, no matter how hard the Chinese manufactures try.
@sbabites
Жыл бұрын
They’ll just make a 1x1 out of it, it can’t turn.
@yungskigg
Жыл бұрын
Bruh name one NON-chinese speedcube brands
@Nova6388WasTaken
Жыл бұрын
@@yungskigg ehem. Rubiks Gan Mscube Xman
@ProfessionalMethCooker69
Жыл бұрын
@@Nova6388WasTaken those are also Chinese.
@Nova6388WasTaken
Жыл бұрын
@@ProfessionalMethCooker69 thats debatable
That copious amount of lube is the cubing equivalent of when you would mix a bunch of different drinks and sauces together as a kid and dare your friends to drink it
This person totally deserves a massive round of applause for this (and all his other vids): he went through the pain and agony of reversing the magnets of HALF the pieces of a 7x7 AND disassembling and reassembling it TWICE. PLUS solve the whole thing after having smushed like 15 lubes and other things in it with dirty, oily, stinky hands. Also, he had to bear the feeling of hand sanitizer on a cut-yikes…
Random person: what instrument do you play? Me: the 7x7
i laughed so hard at this, just tossing random stuff into a cube and making it awful, i dont know much about cubing but one day i really wanna make one of these myself just for fun
I think that’s a high risk of popping out a large amount of pieces.
@Z3Cubing
Жыл бұрын
The cube was surprisingly stable, even loosened and without springs!
@YagerMaelStrom
Жыл бұрын
@@Z3Cubinginteresting
@Trash-gamer-person
Жыл бұрын
Ya don’t say
@BananaJosh_173
Жыл бұрын
@@Z3Cubing it needed sand
@isaiahquililan8948
Жыл бұрын
Ikr
When you said “let’s try and turn it” after removing the springs and the cube just refused I laughed out loud.
When he brought out the WD 40 as a cuber, I Almost gaged😂
Congrats, you just made a modern day v-cube 7
@zombiehunter2956
5 ай бұрын
he made a Rubik's Brand Dollar Store 7x7
The calm narration while making this abomination was perfect
you should still have some magnets attracting to make the cube more uneven
This produced a marvelous mixture of fun and pain while watching. Good stuff 👍🏽
you managed to make the cube bad for all 5 senses: unsatisfying to see, weird smell, sticky touch, annoying to hear and it probably tastes bad
He is one of those youtubers that whatever content he makes is good.
@mikedrewson5545
Жыл бұрын
Facts
@beatnrg
Жыл бұрын
With quality being the priority and not quantity!
@DevenHamlin56871
Жыл бұрын
@@beatnrg Even though his quality of video is extremely high, the quantity he makes them at is higher than most youtubers, even youtubers that make lower quality videos.
@beatnrg
Жыл бұрын
@@DevenHamlin56871 he’s my favorite cuber puzzle you tuber!
@DevenHamlin56871
Жыл бұрын
@@beatnrg same.
This guy is so creative when it comes to cubing modifications
@BotanRice
Жыл бұрын
Fr
Imagine bringing this to a speed cube tournament
@talcorp9998
Жыл бұрын
Now imagine someone brings this and *wins*
@cycrothelargeplanet
Жыл бұрын
@@talcorp9998 oh god
@Icuantes_Pessinaldo_di_Suii
7 ай бұрын
Max park be like
Only thing I could think of is maybe putting sandpaper on the sides of the pieces, that way all the pieces will scrape up against each other.
@beardiemom
Жыл бұрын
'Scuse me, but what kind of psychopath are you? I just *heard* that in my head and it made my skin crawl.
“Yo, check out my new Rubiks Cube” “Dude, that’s cool, got one for me?” “Yeah, here it is” *The Rubiks Cube he gives you:*
i couldn't imagine trying to test the polarities on those magnets
When he brought out the vaseline my eyes widened in terror, no joke.
As someone who knows nothing of cubes myself, all I got from this video is that adding a whole bunch of lube seems to help the cube.
Never did I ever think that I would see a cube screaming for it’s life
@Robloxian683
4 ай бұрын
DO NOT HARASS BECAUSE I WILL BLOCK YOU WTF
Remembering the color scheme correctly is something I struggle with a lot. So I didn't even notice that it was wrong :o
@mewtu5817
Жыл бұрын
Just remember that White is opposite of yellow, and if white is left of you, Red is under Blue, which is under Orange which is under Green which is under Red
@Icuantes_Pessinaldo_di_Suii
7 ай бұрын
If u do 4x4 or 6x6 u will know the color scheme by heart
When you really hate a cube this much remember: there’s always a sledgehammer. Poor little 7x7 RIP.
You should put speed cube shop lube in it as well!
@TyperMarlinGames
Жыл бұрын
That’s a pretty good shortcut for making the worst turning cube; using speedcubeshop lube.
@DevenHamlin56871
Жыл бұрын
Wow, What a roast. 👏
challenge idea: how many 4x4s can you solve while a non cuber is trying to solve a 2x2.
When a non-cuber plays with a cube without reading instructions:
i actually put hand sanitizer in my worst cube in mu collection and it got better somehow
Next try dunking the whole thing in a tank of acetone. Mauve get some chemical-proof gloves and try to do a solve under the acetone before the cube dissolves.
Z3 Never fails to entertain everyone.
@chicken_wing1235
Жыл бұрын
or z’
Merry Christmas
@al_cuber
Жыл бұрын
Hi
@HariTheCuber
Жыл бұрын
Hello
How to make a worser 7x7: Step 1: throw it in dirt Step 2: give the rubix cube the same treatment of birth Step 3: Kill the rubix cube Step 4: bury it Step 5: Nothing Step 6: Nothing
Back in the day I lubed my authentic rubiks brand cube with vasoline and olive oil, and in a cube like that it actually did help
You can see his slow descent into madness as he adds more and more goop into the cube
I need a therapist after this. What a cubing night mare.
So it looks awful, Feels awful, Sounds awful, Smells awful, And probably tastes awful. This thing is an affront to all five senses
What about a mod where there are normal magnets in a 3x3 but weaker repelling magnets at the same time so it maybe could have the benefit of stability and less friction
Put 2 part resin in the cube with baking soda and vinegar along with removing the screws entirely
9:06 The way he said, "Hand sanitizer!" got me dying😂
I died when he said he swapped the colors around
Wow you put so much work into your videos! Keep up the good work!
“it was super loose now it’s kinda tight, it’s got about a dozen lubes in it and a bunch of things that aren’t lubes and now it’s super slippery to the point where i can hardly hold it” - Z3cubing
next time you make a worst turning cube, I suggest adding olive oil, makes cube feel very strange :)
what about a magnetic 17x17? btw, really good video, i am sure that it'll have a amazing quality!
@Pixomite
Жыл бұрын
It exists, but it took DAYS to make. Imagine all of that hard work and money it would take to get a 17x17, take it apart, buy some magnets and add some, yeah. Not ideal.
@Ocarasemdinheiro
Жыл бұрын
@@Pixomite it's for science
@Pixomite
Жыл бұрын
@@Ocarasemdinheiro kzread.info/dash/bejne/a4KTl7SIpMW1Y6g.html
@Z3Cubing
Жыл бұрын
I believe that would only take about 50% more magnets than the gigaminx I just magnetized. The hardest part would just be reassembling it!
@GffffxtxtdSucksBallsTakeThat
Жыл бұрын
YOOOOO Z3
7:14 The sweet smell is actually coming from the Angstrom Compound X, it is scented with sweet pomegranate.
When you added the WD-40, I whispered "no" at my monitor. When you added the vaseline, it turned into me whispering "NONONONONONONONONONONO" and my housemates wondering if I was okay.
Try to make the loudest 3x3
2:13 This is a great way for your smart annoying brother to find magnets
Guy: yo I have been looking for a 7x7x7 cube because I want to learn how to solve it! z3cubing: oh yeah I have a free perfect 7x7x7 for you! Guy: ok perfect. The 7x7x7:
This should be a new official tournament genre, HORRIBLE cube solutions... The person to trow it out the window and give up on cubing permanently last, wins. 🤣😭
i put wd40 on a 2x2 once and it made it super slow and uncontrollable at the same time, such a bad idea lol
this is so distressing, yet i was horrifiedly fascinated enough to watch the whole thing.
I love how your so casual when putting the vaseline in
the lubrication is like me trying to speed up my really old slow laptop but failing miserably
You should’ve dumped a bunch of fine glitter in/on it after the lube lol
when the 7x7 is the first one to fall asleep at the sleepover
a rubik's 7x7 would absolutely detonate this cube in a competion of worst turning
Z3: i'm inventing a new popping mechanism us: aha 😅, you mean an Anti-popping mechanism, right? Z3: [Anakin 😏 face] us: 😳
This video was hard to watch as I’ve had trouble getting my big cubes to turn better, but I couldn’t look away 😂
You Should Do The Worst 3x3 With One Of The Lubes Being Maple Surup
It almost hurts seeing this happen to one of my favorite cubes and my favorite 7x7 no less.
This is the kind of chaos I needed in my life
Only you need to demand a 7x7 to Rubik’s, will not disappoint you.
Incredible video 😄
If they say that solving Rubik’s cubes are for smart people, then imagine how smart Rubik was
this video was hilarious and it made my day thank you Z3
That was a rather fast solve, sub 19 seconds, the ending was a little slow but i believe you can easily improve that, keep it up!
Turns a cube into a chemical weapon with copious amounts of lube
never thought seeing a 7x7 worse than the vcube 7
Thanks for the horrific idea! I will never do it but it will sit there and taunt me!
from the thumbnail I already know this is about to be good
Bro murdered a 7 by 7 cube,and suprsingly,I loved it!
So that's how my 7x7 was made. Good to know!
the lubrication part reminds me of making potions with shampoo as a kid 😭
I've thought of a few ways to make the worst rubiks cube possible, and I have an idea: a rubiks cube but with colored fur
This man is the whistlindiesel of Rubik's cubes
The time laps is very satisfying
That literally gave me chills just looking at the thumbnail omg
This video just makes me appreciate my 7×7 more
WD-40 my mans just turned into a german in a single video, but you used it wrong. Because when you use it, it fixes everything
LOL I just scroll randomly to a part in the video and then he’s like “and I’m gonna put some hand sanitizer” and I’m like bruh
The worst rubicks cube lube has gotta be motor oil
At some point this video went from funny to absolute pain…
“Making the most Annoying 7x7” is a better title
Really i don't know how you always get new oryginal and intresting ideas to video
7:30 “I actually kind of like it”
thank you, this made my 7 by 7 so much better i have been setting a lot of PBs
The cubing community should've called cube lubricant "cubricant"
This is like that scene in Alice in Wonderland where the Mad Hatter and the March Hare fix the White Rabbit's clock.
Here's a useful bit of knowledge for ya: WD-40 isn't a lubricant. As the name implies, it's actually a water dispellant, and should only be used as a lubricant if you intend to disassemble whatever you are putting it in afterwards, as it is also corrosive.
the pieces want to come apart so badly it's just a bomb at this point
Bro that turns better than my old 4x4 💀
WD-40 is mostly a displacer instead of a lubricant, so it probably just pushed most of the good lubricants out. Adds to how cursed the video is tho so it's good