What's your guys thoughts on the box? would you do anything differently?

@jonnewton5929

9 ай бұрын

I reckon I would of made the same decision. A workable double din unit couldn't go anywhere else. And it looks great and works well. Great execution Liam

@praadnyawadke2780

9 ай бұрын

This really looks sick. I would not change a single thing honestly. I’ve got a 98 Triton and this video has given me some ideas to work with my Ute and get it fitted out. Cheers guys 👍🏼

@goldmagnet

9 ай бұрын

Got a link for the sub you put in, I recently put one of the teyes android(practically the same as yours) touch screen units in my old 2003 courier, they're pretty cool hey having a bit of tech in an old car.

@MicahBell_1860

9 ай бұрын

The only change I can really see, is to make it slightly lower, but I don't think you could go much less. Otherwise, to make it more of a factory look, & it would be a massive effort, would be to rip out the whole centre dash/console, & start from scratch. Your design is much more cost-effective & still gives you everything you need

@FIXIEFOOL

9 ай бұрын

Ive done the same but i used a gq radio fascia flipped upside down and cut in half to match the rest of the interior!

I love how you guys just make it work with what you have and not just go out a spend ridiculous amounts on mods. Keeping it real and relatable. One of the best 4x4 channels out there in my opinion. Thanks guys

@AussieArvos

9 ай бұрын

Thanks Adam! That really means alot mate!! cheers :)

Happy Fathers Day all! Thanks for not making this a 5 part series like some other channels would 👍🏼👍🏼

@AussieArvos

9 ай бұрын

Thanks mate!

Next time you do something similar score the internal fold points with a grinder cut off wheel. Will give you a perfect fold 👌🏼

So legends, at the start of every great project you need to go flog a street sign. I used a speed sign to make a speaker console in my boat 👍

Yesss good work young fella need more kids like you around these days

“do your best, carpet the rest” is a great motto!

Brilliant stuff. You boys have these DIY episodes down path. You always know how to make them engaging and entertaining to watch. Excellent work from both of you. 👍

@AussieArvos

9 ай бұрын

Thanks Fatman! we love doing the DIY stuff! Cheers mate!

Joy on Liam's face is priceless. Shows the pride he takes in doing things himself. Good onya kiddo.

@GetUpSunshine2

9 ай бұрын

Was going to comment the same! What a bloody lovely video to watch. And a great result too. I get your reluctance to drill or fasten to your dash Liam but please consider it. Reckon I’ll be doing something similar in my GQ one day and will be posed with the same problem. I won’t be removing it, it’s a great permanent addition so it will likely be fastened permanently. And securely. Bloody well done, love your resourceful sheet metal folding work too

Excellent work Liam. Brings the GU into the 21st Century. Once again great editing. 👍

@AussieArvos

9 ай бұрын

Thanks Hammer!!

I am surprised that more people don't build something like this. Awesome work!

Very tuned in young fellas. I love the way you present yourselves, both of you.

The dashboard looks so cool and I like how happy you are with your work. Good work mate!

Awesome watch guys. Love watching you guys make stuff like this, makes me itch to get out and make something similar for myself

the unit honestly looks really good, great job the this custom dashboard.

Great job Liam and yes it does look factory , the squareness and the curves ❤

Great idea and has given me some ideas for my old clunker ute. Love the use of the totally obtained legally street sign. Awesome job.

Just love the "simple" way u are running this, no matter what u are showing. Keep it up guys, u are my favourite channel😊

I love how neat that looks!

Absolute..Bloody..Legend.. love the set up !!! You guys have an awesome YT channel. Thankyou for your time and effort 👍👍👍😃

Ive been wanting to do this in my GQ for a while now...good to see it done and its inspired me more now to actually do it.... top effort 👌

Excellent job Mate. Love your enthusiasm, keep up the great work. Cheers from Michael. Australia

8:32 Now you have the perfect place for a single din UHF radio. The box "fits" really well in that spot on top of the dash, with a very good heads up display position. Great work fellas 10:48 Why do you have a Cummins sticker on your dash? Is this an easter egg? Is a 6BT upgrade in your sights? Don't forget to smash that like button & comment, to feed the algorithm, as reward for these fellas efforts to entertain us

@AussieArvos

9 ай бұрын

Thanks mate! Yeah perfect spot for a UHF. And no I don't think the patrol will be receiving a Cummins, just silly P plater things haha

@MicahBell_1860

9 ай бұрын

Copy that, Liam @@AussieArvos But maybe in the future......... giggles

That's a good looking setup. Well done!

Looks fantastic, a lot of thought and attention to detail as always🇳🇿

You guys are very clever and skilled . Brilliant

Well done awesome work. I have also added a front camera on a switch for when I rock crawl. It helps if you want to place your wheels when you get to a technical stage.

22:50 Excellent work Liam, you young fellas are making us Old Blokes proud. I reference your Vids all the time. Keep em coming.

This is grass roots 4wd and I love it! That is one awesome head unit, I will put it on my wish list of "nice to haves" Great video guys...as alway 💯

I love wheeling but know very little about cars mechanics and electrics and learning heaps from just watching you guys DIY all these things. So cool and 100% jealous of that shed and all the tools you’ve got there! Keep it coming 🙌🏽

Great video i picked up that same sub today for my 4WD after your comments. Cheers

HOLY SHIT!!! Just the episode i needed because ive been trying to work out how i would do JUST THIS!! Thanks boys.

Nice work and I enjoy your passion for working on your 4wd.

Got the same atoto unit as Patrick based on the video in his 80. For the price they are a brilliant unit, got the reverse camera and front dash cam too. The install came up a treat! Neat as hell and looks like it was meant to be 👌

Wow, that’s very clever, kudos to you for a great job!

Bloody nice job young fella. Well done. Given me a few ideas for my ute.

another DIY vid from the lads. thats wat we luv bout this channel. no BS, just getting it done the best way n sharing the process. awesome. all u Pat lads should be putting in orders for ur own.

Only thing I would do is mount it a little stronger. I know the velcro works well but if you are in a accident. That becomes a brick missile at head hight. But, looks awesome and has given me heaps of ideas for my build.

Every Sunday I’m just waiting for you guys to post a video and every time they are so interesting and I always watch all of them keep up the good work mate

My first video I've watched from you and it's awesome! So Aussie and it's great! Have a can that's been on the shelf for a year but still full, let's use it and see how it goes, so awesome! Thanks for the video!

Definitely going to use something similar on my next build very clean setup

Good job mate. That looks really clean!

God that’s awesome! I don’t need one for my ‘17 collie but I want one JUST like yours, bloody fantastic 💯

Awesome build! I only just installed an Atoto in my car after watching Patrick's video and I love it!!

@AussieArvos

9 ай бұрын

Cheers mate! Yeah it's an awesome unit!

thanks for reusing the amazon box. The backup camera alone is worth making this whole system work. Looks great too

I had a shot at you boys about your choice of snorkel, I stand by my opinion on stainless snorkels but I must say - good on you young fellas, my 6 boys (!) love you guys and I think you lot are a great example to other young guys out there and keep up the good work. Just remember that good looks should not over ride function!!

@AussieArvos

9 ай бұрын

Thanks mate!

This came out amazing, thanks for all the detail, love that you didn't drop a bunch of $ on specialty tools and just did a great job anyway! I've been wanting to do a custom DC control box to mount in a specific location but struggling to find the right thing (medicine cabinet notwithstanding) and will probably go the aly bend and carpet route.

Love the design and very well done. You could fill the space of the old head unit with a single din storage pocket for your wallet etc. Jaycar would have something. Adds to the factory finish and closes up the space.

Came to watch the vid... stayed to say congrats on the 100K Subs! Great effort! Cheers, Cahn

@AussieArvos

9 ай бұрын

Thanks so much Cahn! means alot mate! :)

Super cool! Looks great!

Cracking video mate! Head unit looks so nice 👌

That's sick, im definitely buying the switches as well

Great job man! Loved it

Just sat down with a morning coffee and saw your video come up perfect timing ✔️✔️your workmanship excellent 👌👍 faultless couldn't do better myself glad you guys have a Go at everything you want💪👍

@AussieArvos

9 ай бұрын

Thanks mate! Means alot! I was really stoked with how it turned out!

Awesome work bloody keen to see someone just go for it obviously a good amount of planning involved but looks great looking to do something similar myself except 3d print the housing was thinking light bondo & paint but that carpet solution at least seems a lot less stressful than all that milarky so cheers

Nice work and a great idea !

this is my second time watching your videos and I learn a lot from you guys.

Grey beard 4WD here you have gone a long way in restoring my faith in the youth of 2day with your channel and ingenuity, have you considered maybe making these units up there would be a place on eBay for them I would think.

That's dope af brother - got me brainstorming to make one myself for a 3rd gen 4runner now

Great video there guys. From William. Mount Gambier-South Australia.

Excellent work young man

Great job it looks fantastic better than factory 😉

Great video, amazing job on the unit!

Looks pretty good. I prefer to use a layer of 3mm foam and then cover it with vinyl to give it a more factory look. It's all just down to personal preference though. Great job.

That box is so awesome i wouldnt change a thing maybe a circle gage would look cool but thats sick

Great video! Love the look of that head unit, will have to check one out I reckon.

Looks great! I did the same thing before! Carpet is a good idea!🎉🎉🎉

Mate, great video! That Atoto unit looks to be every bit as good as my super expensive Kenwood DDX9020DABS. Thanks for the info!

Bunch of street signs about to start going missing 😂. Love the Ingenuity on folding the angles 👌🏻

That’s actually brilliant

These head units are really good! I’ve had mine for over a year. Best radio ever! I’ve hooked my vhf/uhf radio fed into the unit for better clarity of sound to listen people talking on the road or out bush. Also the apps and the accessories for it work flawlessly! Great job guys👏

@mitchacosta7233

6 ай бұрын

Would you still recommend this headunit mate ? I had a Sony and the sound quality was great but wanted other features. Went to a android unit and now it sounds bad so debating this

Soon as he pulled that street sign out knew it was gonna be a great episode bloody legends

Great work lads highly rate the Alpha Blokes plug on the head unit

love this I might build 1 similar out of timber...

What a great combo. Having the S8 up top is so much better than hidden down low and it does look great and will be very useful. I’ve been looking at the ATOTO units but either the pro isn’t available here or just not seen it yet. It does look very sleek. Also impressed with the JustRaceParts gauges. I was in touch with them for a tricky setup and need to complete the order with them. Very good to have the audio and gauge set there. Also the additional switches. I’ve a few blanks but if I was making a pod then I’d follow your CAD. The dash mat and the pod do look very factory. My dash has reasonable space for a double-DIN but I’m impressed with the aluminium box, rivets and carpet. You’ve done in a couple of week, what I’ve failed to do in a couple of months. Would I do anything different? Well no. My application is a bit different but I need to think now! Thanks for making and sharing.

Me looks at old road sign I have in the shed well its cutting time good job on the console

Ahhh that's mint! Definitely legit factory fit! Love the carpet! Very OCD perfect finish maaaan! I can see missing signs! I have got one STOP sign found on the road but I wont be making one as my truck has single din connection.

great video Liam. hope you had a great weekend

looks great mate!😎

great work making that unit. Subbed. Keep it up.

Perfect timing for this video. Need ideas for my D40 Navara.

@joshieburg8021

9 ай бұрын

Gunna put one in my d40 aswell

Awesome inspiration!

Great ep!

wow. I honestly think that its a brilliant idea. if I have any room on my car I reckon id give it a shot too. looks good too by the way!

yes... yes the cheaper ones do last been running them for years. cant complain for a $300 10.1" unit with all the same stuff. actually thats at the top end with the 8core procesor and 16/128gb internal storage. even the wifi antenna is built in. love the endless customizations that come with these units. even changing the home app to something with more info like carwebguru if thats what your into. great addition to the rig. box looks good.

Congrats on the 100k lads.

Looks mint! Well done mate.

@AussieArvos

9 ай бұрын

Cheers :)

Well done. It looks great 👍

@AussieArvos

9 ай бұрын

Thanks Raymond!

Looks great!

Goddam 🤩 this is MINT. Amazing work on the video and the mod. Almost gives me enough inspo to get back into my GQ 😅

Nice job mate, just might have to do that to mine

I've just installed an eonon headunit in my car. Basically the same functionality, $260!! For the price it can't be beat

This is so bloody good!!! Next minute a fab shop will be selling these for $800

congratz on the 100k subscribers!!

Not sure if anyone else has suggested it but you can hook up multiple cameras up to a switch and use them when rock crawling/ doing more technical driving

Great job mate

Hot tip for folding. Score the back 1/3 of the thickness of material with a grinder, bends like butter.

Yeah that's sick ! well done ! go the Patrol 🛻😎📹🤙📡

Great diy project buddy

@AussieArvos

9 ай бұрын

Cheers mate!

Love it great addition