Long time no see! I was planning to make a hand tools video as my comeback but no luck with time, instead I was able to film this client project I worked last month, power tools mostly. Hope you'll enjoy it!

@rolandrivard2667

Жыл бұрын

Great to have you back! Your videos have been greatly missed.

@vollzeitflieger2490

Жыл бұрын

I second Roland, thanks for sharing!

@thecrazychemist

Жыл бұрын

Good to see you back, I was wondering where you had gone and hoped you would return at some point. Looking forward to seeing some more of what you've been up to...

This is absolutely beautiful and such a pleasure to watch. As many commented, I love watching hand tools videos but I’d rather have power tools videos than no video at all. You’re an artist and you have been missed! Thank you for these wonderful videos you share with us.

Beautiful result as always. I think I will always prefer your hand tool videos, but I'll gladly take power tool videos over no videos at all! Welcome back to youtube, you have been missed :)

@AdrianPreda

Жыл бұрын

Thanks! Yes, it was a hard decision for me if to film this or not, but it was over 15 months since I haven't published anything so I had to do something to bring the video making mojo back

Yes! Welcome back Adrian. Your videos are always informative and enjoyable. Another lovely piece of work. Hoping for more hand tool videos to come? There are far too few quality videos of this nature, so don't stay away so long! 😉

Good to have you back Adrian...

Hi Adrian! So glad to see another video from you. You have such a knack for visual storytelling - no words needed. So beautiful to watch the story for your client unfold. I'm sure they're very happy!

@AdrianPreda

Жыл бұрын

Thank you so much!

Worth the wait! More please!

Worth the wait , Beautiful work 🥂

Absolutely beautiful!!!

Adrian, thank you so much for sharing again your talent, skill and artistry with the world. I watch your videos many times and keep learning new things. I hope you will continue in your good work and offer best wishes from Arizona, USA. 🙏

I love watching the perfect fitting mortises and stuff. Great video!

@AdrianPreda

Жыл бұрын

Thank you! Cheers!

It’s a long time no see you Adrian . I am very happy that you come back. You are inspired me to do woodworking. I watched your all of videos in KZread and rewatched many times. I learned a lot of things. So beautiful Shoji lamp and Kumiko !!! At first I think you will stop doing your work. It’s very sad . But thanks for coming back brother. Hope you will upload a new project. 🙏🙏

Love it! So want to do this myself. Well done! Your videos are always inspiring!

Beautiful project. It's nice to see a new video from you!

@AdrianPreda

Жыл бұрын

Thank you! 😊

Magnifique! Quel beau travail ! Félicitation !!!

Beautiful work Adrian & nice to see you posting again! Happy New Year! 👍👍

@AdrianPreda

Жыл бұрын

Happy new year! Thanks!

Excellent work Adrian.

@AdrianPreda

Жыл бұрын

Many thanks!

Beautiful.

Really beautiful work, Adrian! Amazing looking doors! 😃 It's great to see another video from you! Welcome back! Stay safe there with your family! 🖖😊

@AdrianPreda

Жыл бұрын

Thank you very much!

Beautiful !

Welcome Back! Excellent video. Please keep making them.

@AdrianPreda

Жыл бұрын

Thanks, will do!

I've missed these pleasant videos! My friends often ask me about you when they mention the gifts I've given them.

@AdrianPreda

Жыл бұрын

Thank you Melinda, sorry for the long wait! Glad to hear they enjoy them!

There so beautiful and simple elegant design.

Yee Haw! The return of AP! Very keen to see your take on screen making.... lean design is easy on the eye. Cheers Jerry in Everett Ontario

@AdrianPreda

Жыл бұрын

Thanks 👍

I normally don't comment, but I want you to know you have inspired me to do more work by hand. I'm so happy to see another video from you. Thanks

@AdrianPreda

Жыл бұрын

I'm so glad! Thank you!

Hey Adrian! Nice to see you back! We'd like to see an update about your workshop when you have time! Cheers!

@AdrianPreda

Жыл бұрын

Thanks! Will do probably this summer!

missed your content. hope to see you more regularly. thanks for your work.

@AdrianPreda

Жыл бұрын

Thanks!

Beautiful work sir. I'm inspired to make some.

Really lovely work. Thanks for sharing!

@AdrianPreda

Жыл бұрын

Many thanks!

Mă-ntrebam unde-ai dispărut! Bine-ai revenit! Foarte faină lucrare! Mai vrem!

@AdrianPreda

Жыл бұрын

Multumesc!

Beautiful as always Adrian ;)

beautiful video and work!

Beautiful work. And welcome back; you were missed.

@AdrianPreda

Жыл бұрын

Thank you very much!

Ben tornato.... finalmente....sei sempre molto molto bravo

Nice work - as always.

@AdrianPreda

Жыл бұрын

Thank you! Cheers!

Damn that's beautiful!!

amazing work

Great video Adrian. You seem to have acquired a lot more power tools. The door looks great.

@AdrianPreda

Жыл бұрын

Thanks Nik!

I’m glad you were finally able to publish your vid. I can tell you missed doing them. Top!

@AdrianPreda

Жыл бұрын

Thank you kind lady😀

These would be perfect for my built in wardrobe. Awesome project.

@AdrianPreda

Жыл бұрын

I did one for this client😀 Haven’t yet made any pics but when I will return I will, you can check them on my Instagram page

@TheStabbedGaiusJuliusCaesar

Жыл бұрын

@@AdrianPreda - What did it cost your client? Would it be feasible for you to do send them unassembled to Denmark?

Holy Wow!

Very nice.

Espectacular trabajó maestro, tiene un toque japonés, el resultado final es magnífico, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜

@AdrianPreda

Жыл бұрын

Gracias!

Tudo incrível e Lindo.

Yeeeeeeees finally you are back =) i was missing a lot your inspiration videos, argentinean hugs from Belgium!!

@AdrianPreda

Жыл бұрын

Thank you!

Top shelf craftsmanship….Beautiful in it’s simplicity…..Great Vid!!! [and, surely not for a family with young kids! 😁]

@AdrianPreda

Жыл бұрын

Indeed, or cats😀 Thanks!

@doubledarefan

Жыл бұрын

@@AdrianPreda Or dogs larger than tribbles.

Glad to see you back. You've been missed.

@AdrianPreda

Жыл бұрын

Thank you!

Foarte frumos, si clipul si lucrarea! Felicitari!

@AdrianPreda

Жыл бұрын

Multumesc!

They say (sometimes it's not the destination ... it's the journey ) , but in this video i enjoyed both the journey and the destination ... 👍

@AdrianPreda

Жыл бұрын

Thank you!

foarte frumos...terapeutic

WOW!!!

well done,

Very nice! 🙂👍

@AdrianPreda

Жыл бұрын

Thank you 👍

Nice too see you

Absolutamente linda..❤

Welcome back, You're a sight for sore eyes! ^^

It's always a pleasure to watch you work Adrian. Is the kumiko lattice work typically only applied to one side of a shoji door? At 12:21 it looks like there are 2 sets of doors spanning a gap. Is this typically how you would get the lattice work to show regardless of what side of the door you are on? Or would you ever consider applying the kumiko on both sides of the paper so that you would only need a single set of doors?

Ciao e bentornato!! Ottimo lavoro... raffinato come sempre( del resto)!!

@AdrianPreda

Жыл бұрын

Grazie!

@AdrianPreda

Жыл бұрын

Grazie!

Very clean looking. Where to buy those bottom rollers?

well done. I was hoping to see the doors open and close at the end though ;)

@AdrianPreda

Жыл бұрын

Thanks! I know, I was in doubt to postpone this vid so when I return there to make better pics. It was late when I installed them, barely no light for pics and videos. The final pictures are heavily edited so I can show the final project😀

Awesome video! It's cool to see your power tool setup as well. What type of glue did you use to adhere the paper? And what was the purpose of spraying it with water afterward?

@AdrianPreda

Жыл бұрын

Thanks! That's a special glue for shoji, though is not so special, just made from rice, you can diy too but is not that expensive to buy. It is easy to remove or replace the paper afterwards, just moist with water with a brush and it will peal easily. Spraying is used to remove dents in the paper. Water will soften the paper but once it is dried it will take the form of the frame so it will be tight and flat like a drum head almost

Instant like

@AdrianPreda

Жыл бұрын

Thanks!

I love this Shoji style. The end result looked fantastic in the room and it reminded me of my final project as carpentry apprentice which is a bigger Shoji Lamp/Side Table Hybrid. It was so much work and stress but absolutely worth it imo. It makes me appreciate the work you put into this a lot. The little tricks and tools you use to make the bridle joints are very nice. Edit: Are you, by any chance, from Romania?

@AdrianPreda

Жыл бұрын

Thanks! Yes, from Romania.

@ethio6308

Жыл бұрын

@@AdrianPreda Nice! Im from Germany living in Bucharest to study. If you make any exhibitions or something similar I'd be happy to come by and see your work. Doamne ajuta și sănătate.

Dear, I haven't seen you for a long time,👍.

Very nice and beautiful video Adrian" One question: where did you buy the rollers. Thank you.

@AdrianPreda

Жыл бұрын

Thank you! From Germany (rollers are Japanese though), look for Shoji Bau

Самый аккуратный мастер 👍👍👍🇹🇷

@AdrianPreda

Жыл бұрын

Thank you!

Lovely work, as always. May I ask, where did you source the rollers from?

@AdrianPreda

Жыл бұрын

Thanks! Look for Shoji Bau germany

Hi Adrian. My fall project is to build 2 Shoji sliding doors and your video is very helpful. I checked the list of tools and product but I can’t find the rollers (time 9.35). Can you direct me to your supplier? Thanks for the video. Beautiful work. Andre

Hey, neat job! I made some sliding shoji panels myself but I made some mistakes and they are not sliding neatly so I will need some kind of rollers myself. Did you find yours locally?

@AdrianPreda

Жыл бұрын

Thanks! No, i germany, look for Shoji bau

What finish do use on the frames before applying the paper? Thanks

Nice video 👍 Btw, is that Record Power BM16 morticer ? How do you like it so far, worth the money?

@AdrianPreda

Жыл бұрын

Thanks! Yes, that one! Very well made, works great. I haven't yet invested in quality chisels, those here are the crapy chinese ones that came with the machine, but they did their job for 2-3 projects I made so far. The only con are the depths screws with the levers, are worse, they brake. But that's not a big deal, can be diy something better

@ipasiczd

Жыл бұрын

@@AdrianPreda great, tnx a lot fot the answer and keep up the good work! Looking forward to new videos!

Meserie 👍😎

hi adrian how are you ? i'm starting to study by myself wood working and i love your channel what can buy as a starter kit for begginers like me ?

@TheYoziel

Жыл бұрын

i live in a apartment so i can't use machinery btw

Faină treaba Adrian! Felicitări. Am observat un cnc în filmare, pare ceva de care as fi și eu interesat (ieftin și bun) mi-ai putea da niște detalii despre el?

@AdrianPreda

Жыл бұрын

Mersi! E un Shapeoko 2 vechi, nu se mai face. Nu stiu ce se mai gaseste acum la aceeasi bani si specs, nu m am mai documentat deloc

Finally!!!. Frumos rezultat. Îți amenajezi casa in stil japonez, sau e un client?

@AdrianPreda

Жыл бұрын

Mersi! Client :) Voiam pt mine sa fac doua pt ferestre, si sa le fac clip, mai traditional, scule de mana dar n-am apucat asa ca le am postat pe astea

@andreipopescu983

Жыл бұрын

@@AdrianPreda Se cunoaște ca îți place și lucrezi din suflet. Doar așa poți face ceea ce faci tu. Cum de nu mai ești așa activ pe KZread?

@AdrianPreda

Жыл бұрын

Mersi! In ultimul an nu prea am avut timp de filmat, a venit un bebe si ceva treaba cu comenzi

Frumos! De unde ai luat masina de slefuit cu valt?

@AdrianPreda

Жыл бұрын

Mersi! De la igm tools cehia

✌🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

Its been too long man! Welcome, cause I was tired of watching stupid woodworking projects.

It kills me that you didn't open and close the doors at the end...

@AdrianPreda

Жыл бұрын

Couldn’t film that, it was so dark for the camera. I barely made and heavy edited the final pictures

@kakman1958

Жыл бұрын

@@AdrianPreda :) Beautiful work regardless.

salut, de unde tiai cumparat masina de facut mortise and tenon ? f fain videoul!

@AdrianPreda

Жыл бұрын

Mersi! Din Austria, nu mai stiu numele, ceva lung, am cautat cu translate in toate limbile in Eu pana am gasit o aici. A fost cam scumpa 450 + 150 transport dar aveam nevoie de ea. De altfel exact pe asta am vazut o si pe shop expert la noi