So we definitely need to do more team videos. Good thing we'll be able to do a lot more of that soon....😎. Subscribe and don't miss it bit.ly/leestuart38

@TonyLoewen

3 жыл бұрын

Lee Stuart looking forward to more team video’s 🤘😎

@lillottie1240

3 жыл бұрын

I'll be subbing next month, can't atm due to finances but def will next month :D watched you build so much i only recently stopped my sub to your twitch lol so this is cool

Slap a like for team Rogue Lab 👍🏻

12:07 *I love that you kept this part in!*

Beautiful wrap, can just imagine the paint boys turning up in that truck for their next job and they cannot possibly be more stoked to be the biz!

@leestuart38

3 жыл бұрын

They've definitely been turning a lot of heads in that thing. Thanks man

I have the same printing and laminating rigs and picked them up literally in the same week that you did. Still scared shitless to try a wrap! Your work continues to inspire!! Keep killing it!

@leestuart38

3 жыл бұрын

Now that I've done one it's a lot less scary, I felt the exact same haha. Can't wait to do more

@RonderickHenry

3 жыл бұрын

@josh Jordan do you have a channel on KZread that you documented your experience with your Roland? I’m in the market and trying to get some real world experience thanks

Stoked to see this bad boy!!!

@leestuart38

3 жыл бұрын

It's a beauty

Absolutely awesome job! Thank you so much Lee! God bless you and all your team members!

*_From_* the awesome *_Premium quality_* to the finishing touches y'all totally killed this Job !!!!!!!!!Keep being great ,So much inspiration going on right now!!! thank you again ,love the videos and learning curves you share with us !!!!!

@leestuart38

3 жыл бұрын

Stoked you get something out of these, thanks man

That looks amazing. Congratulations

Getting into vehicle wraps is very exciting! Most of my customers do a ton of custom printed wraps using the printers we sell them and they love it. It can be a stressful line of work to get into, but also incredibly rewarding!

@leestuart38

2 жыл бұрын

Love my wide format printer. It's been a big earner for me 🤘🏻

Awesome print job and the fitting was exceptional!! Good job guys

@leestuart38

3 жыл бұрын

Thanks!

Would love to see the truck owners reaction as that wrap turned out sick!

@leestuart38

3 жыл бұрын

He was there most of the time so the surprise factor was lost haha, but this definitely won't be the last one of these so I'll catch one eventually. Thanks man

So inspiring brother! Every video you make sure motivates me to do better. Best of luck with everything!!

Bang up job boys! Nice and crisp!

Broooooo! You are so dope! I’ve been watching you for a couple days and you have helped me learn sooooo much about printing!

@leestuart38

3 жыл бұрын

Happy to hear that man, thanks for watching 👊🏻

Man that truck looks sick. You are growing so much with your design and printing. Sick bro 👌👍😎

@leestuart38

3 жыл бұрын

Much appreciated man

Looks great guys!! The boys did great on the B roll!! Keep killing it!

@TonyLoewen

3 жыл бұрын

Thank you 🤘

good job fellas, wrapping & filming!

@leestuart38

3 жыл бұрын

Thanks guys 👊🏻

Great video. That warp looks great

@leestuart38

3 жыл бұрын

Thanks!

Came out bad ass! Looks awesome!

@leestuart38

3 жыл бұрын

Thanks!

Awesome Work Guys. Saludos From The Sign Shop and MyPop, Texas!

@leestuart38

3 жыл бұрын

Thanks man 🤘🏻

Awsome project

Wow thats amazing!!

@leestuart38

3 жыл бұрын

Thanks!

I am currently expanding my shop. I have already ordered the Melco EMT16X Commercial that I saw you use. I too am hard person if not impossible to please person. I think that you guys have an almost perfect system going. Keep up the great work. You inspire me to become a better designer and businessman. Respect ALWAYS

@leestuart38

3 жыл бұрын

That's amazing to hear, thanks!

It’s the first time I’ve ever seen anything like this & Your video just popped in my feed glad I let it play. Great job guys!!!

@leestuart38

3 жыл бұрын

Thanks!

@kayc8088

3 жыл бұрын

after your video is finished you no longer can promote your work, so your work speaks for you. The fact you refuse to let an imperfection maybe invisible to your client you know it’s there and refuse to let it out the door that way. If you can make a customer feel like they are investing their money vs Spending it . Know that you’ve done a great job! Good for you guys!!!

That turned out amazing. Great job guys.

@leestuart38

2 жыл бұрын

Thanks a lot 👊🏻

Great Video Lee! Thanks for sharing! Congratulations!

@leestuart38

3 жыл бұрын

Thanks!

Looks sick bro awesome work fellas !

🎉 awesome I’m designing my first custom wrap too this year

Bro, I’ve been following you since you decided to screen print! That’s freaking awesome, congratulations!

Nice work guys!

@TonyLoewen

3 жыл бұрын

🙌🙌

Dude I was so pumped thinking it dropped already lol

@leestuart38

3 жыл бұрын

Haha this new premier feature is a real tease 😝

Super sick!

Great job!

@leestuart38

3 жыл бұрын

Thanks!

awesome video lee truck looks amazing great job dan and tony awesome work

@TonyLoewen

3 жыл бұрын

superteeprints thank you 🙌

MAN THAT WRAP IS STRAIGHT FIRE 🔥

Already liked. Full trust in it ending up dope

Wrapping is really an art. I wish i had the patience for it, but i'm going to stick to testing my patience with screen printing.

@TonyLoewen

3 жыл бұрын

It is and it’s a lot of fun. Patience is for sure needed haha.

This is awesome.. keep up the great work.. and the wrap looks great. Side note - snake eater hoody SUPER comfy and definitely fails the pitbull bite test HAHA.. but seriously so glad I picked one up.. perhaps I will get another on soon especially since it is starting to hit 47F or 8C and riding needs that extra layer. cheers sir.

@leestuart38

3 жыл бұрын

Thanks for the support man, glad you like it 🤘🏻

Glad to see you back buddy

Kudos to the Rogue Brothers.. 🤓

Glad to see you’re doing good. 🤙🏼🤙🏼

@leestuart38

3 жыл бұрын

Thanks a lot man

Great work!

@leestuart38

3 жыл бұрын

Thanks!

Love your work bro. Keep em cominh

Man those colors look vibrant!!! I love it I wrapped my work truck and van and the guy that printed them couldn't get the black to look like yours Wow!!! How was it held up?

Looks like the Dream Team killed their first video together! 🔥🔥🔥 Killer job fellas👊

@leestuart38

3 жыл бұрын

Thanks dudes!

Naaaaailed it 🔥

@leestuart38

3 жыл бұрын

That's what she said

Fuck yeah! That's some great team work. Dan and Tony did pretty damn good on that footage. 👌🏽

@leestuart38

3 жыл бұрын

Not too bad at all, I'll be getting them a real camera soon 🙌🏻

@Smallbore2wheels

3 жыл бұрын

@@leestuart38 hello yeah dude! 🤙🏼

Nice to see what you can do with This printer

Lets gooooo 🤘🤘

I dare you to tell me I won’t just sit here in the comment sections for two days until this premieres!!! 😂 can’t wait to see what you did with this wrap job!!

@chrisbartolucci1736

3 жыл бұрын

I was just coming into the comments to say welcome to the super early club lmfao!!!

@TonyLoewen

3 жыл бұрын

It’s real good, had an awesome time wrapping this truck and Filming it. Think you’ll be able to get some good laughs from this one too.

@leestuart38

3 жыл бұрын

Let's hope everyone else is just as pumped 😂

@chrisbartolucci1736

3 жыл бұрын

@@TonyLoewen you did an awesome job on the wrap and the film work was great even down to running into equipment for the perfect shot.

@TonyLoewen

3 жыл бұрын

Chris bartolucci thank you really appreciate it! Haha yeah was funny backing into the light stand but I wasn’t going to stop 😂🤣

Congrats! I love it! what vinyl and laminate are you using?

@TonyLoewen

3 жыл бұрын

This was the new SLX plus from Arlon and I think we used the 3200 laminate.

Can you show a video on how to actually design the wrap and get it print ready?

🔥🔥🔥As always 💪🏿💪🏿💪🏿

@leestuart38

3 жыл бұрын

Thanks dude

lovvvvve this video wish I had one!!!!!

Great job! with the truck! It is awesome. Do you work HTV in your projects?

@leestuart38

3 жыл бұрын

I do. I plan on making some htv stuff very soon. Thanks man

Just curious what laminator you are using, and if you are happy with it. Obviously it did the job here haha. Great video!

@leestuart38

3 жыл бұрын

Thanks 🤘🏻. I have the GFP 355TH, it's been great so far

Dude you got my sub. Appreciate everything you've put out there, got any tips on finding new customers?

@leestuart38

3 жыл бұрын

Thanks! The key is content, and lots of it. We have the worlds most powerful marketing tool in our pockets at all times

Do you think you should of went mikami? or do you recommend this rowland. i seen the first video and itr seemed that rowlands sent out someone that knew nothing about the machine

@leestuart38

3 жыл бұрын

Nah I really like the Roland over the Mimaki, it has better ink options in my opinion so I can reproduce pantone colors more accurately and vibrantly. The dealer I got it from definitely sent the wrong guy though 😂, but my new tech is extremely knowledgeable and has been a big help. The cutting I'm still not a fan of but they all have a bit of a issue with that in some way, they're made to print first and the cutting is kinda jammed in as an afterthought. I'll be adding a stand alone cutter soon hopefully and then this setup will be killer

@leonardo29098

3 жыл бұрын

@@leestuart38 spec wise mamiki. color wise mamiki. cut roland

#coool man!!!

Killer in stall and print

@leestuart38

2 жыл бұрын

Thanks 🤘🏻

Can you show us how you took the measurements to print the wrap

awesome

That truck looks really nice, and now I want to give you my money. 🤣🤣🤣

@leestuart38

2 жыл бұрын

Thanks! We'll take it 🤣

Wrap looks amazing, Question: how do you position the wrap on the vehicle? Is there like measurements of where it’s going to sit? Or how does that work

@leestuart38

2 жыл бұрын

We usually measure to a few reference points on the vehicle and the design

Hey bro, what laminate machine are you running and what kind of laminate are you using

Have you tried in 720x1440 G4 I started using that profile and dam its fast but with a high quality but mines not a roland its a mutoh1324x

bro, could you explain how take measures of the paneles and unit them so that the lines connect. Thanks.

@leestuart38

2 жыл бұрын

Ya that's a video I'll do eventually

invest into a graphtec cutter there what i have used for years.

@leestuart38

3 жыл бұрын

I have a smaller 36" graphtec, it's awesome. I'm definitely adding a cutter to this setup soon, either summa or graphtec

What font did you use for your sweatshirt? I wanna get into font editing, and I'd love to play with that one.

I have the same printer I just got a big cutter it’s faster and easier to use than the cut function on the printer

@leestuart38

3 жыл бұрын

An added cutter is definitely going to happen as soon as I can

🔥🔥🔥

I'm thinking about designing a wrap to do my motorcycle...I'm not sure how to go about getting vinyl printed and what my options are for designing

GREAT!!! may i know what brand of this sticker. im afraid to get this wrap JOB haha but this tutorials and techniques it booost my self!

What vinyls did you use for this wrap? Sorry if I missed them. Great video and job 👍🏻👍🏻

@leestuart38

Жыл бұрын

This was Arlon SLX Plus

Hey Lee, Awesome video man, I have one question Which type of material you use to printable wrap??

@TonyLoewen

3 жыл бұрын

Ninad Kesarkar this is a new product not yet released can’t say what it is.

Your work is sick and it looks flawless on the truck. I would be terrified to even attempt to do that. I have the equipment but not the confidence....or money to replace a 10k paint job if I fuck up someone's truck.....how do you get past the fear to be able to produce something like that? I get anxiety cutting $10 a yard fabric when sewing...I would have a panic attack attempting this 😂 But you killed it!

@leestuart38

Жыл бұрын

Confidence is key, taking risks is a big part of progressing in this business. But there's not really a whole lot that can go wrong with the vehicle other than the disassembly stage

Still watching, but awesome job Lee. Looking forward to the upcoming content

@leestuart38

3 жыл бұрын

Thanks man

“Fucking aye bud that’s clean as shit” almost forgot you were from Canada 😂 good shit boys!

@leestuart38

3 жыл бұрын

Hahaha that was mega Canada mode. Thanks man

Wonder if you can print lowrider car patterns on vinyl

@leestuart38

Жыл бұрын

Totally can

Does your Roland VG2 perform its daily cleaning.

@leestuart38

Жыл бұрын

Always

How much do you charge man that looks awesome?

"that's gonna WRAP it up for this one" 😉

@leestuart38

Жыл бұрын

Holy shit! It took 2 years for someone to finally notice that 🙌🏻😂

@conceptdesigns4100

Жыл бұрын

@@leestuart38 😆 I was wondering if you did that on purpose or not😁 great minds think alike. So I'm trying to find out what the initial start up cost for something like this? Like what all would I need, for the digital printing part? Vinyl printer, Vinyl cutter, laminating machine, a computer and software?? Any help would be appreciated! Thanks 😊

@leestuart38

Жыл бұрын

@@conceptdesigns4100 you'll need the printer, cutter, laminator, computer and design software. All in you're looking at $20K-$40K

what brand of vinyl sticker did you use?

It looks amazing!!! Is it possible to buy personal designed commercial vehicle wrap from your shop? I just checked your store web but didn’t see this kind of products. Thanks!

@leestuart38

2 жыл бұрын

Yes we can custom design anything you need. Head to www.roguelabmfg.com and check out the design page to submit a quote request

@klauswang9094

2 жыл бұрын

@@leestuart38 Great! Thanks. Will check this.

I work at a tint and vinyl shop but my boss wants me to learn illustrator and eventually buy one of these printers. Do you think I can learn absolutely everything I need to on skillshare? I know photoshop quite well but I still need to learn illustrator and how to get the vector files to the printer. Honestly very nervous and have a lot of pressure on me to learn all this and get things going.

@leestuart38

2 жыл бұрын

You can absolutely learn illustrator inside and out on Skillshare, I used it to learn everything I know. If you know photoshop you won't have a hard time with illustrator once you get the basics, you'll probably end up preferring it over photoshop in the end like I did

🔥🔥🔥🔥 saludos a mi brother Tonny ✨

Bro where did your buy your blank caps from??

Can you use pvc drain pipe as spare rolls or will it wreck the cutter and laminator?

@leestuart38

3 жыл бұрын

I don't think it would be stiff enough

@1981muldo

3 жыл бұрын

@@leestuart38 ............................................................that's what she said.

FYI: When you do your manual cleaning do NOT touch the bottom of the print heads with the swab. You want to swap around the perimeter. Swabbing the nozzles is a great way to ruin a print head.

what laminator do you have?

@leestuart38

3 жыл бұрын

GFP 355 TH

what's the model of the laminating machine used ?

@leestuart38

2 жыл бұрын

GFP355TH

What laminating machine is that? Iv been trying to find a good one but don’t know what the difference is between a cold or hot laminating machine.

@leestuart38

3 жыл бұрын

It's the GFP355TH. The difference is one has heated rollers and one doesn't, the heat helps with smoother application

@jessepadron5499

3 жыл бұрын

Lee Stuart thank you you’ve been such a huge help! What vinyl did you print this on? And what laminating material do you recommend?

welcome to the world of signs and wraps. the roland software u need to learn the line cut in illustrator. sai make a decent print and cut software. i personal ditched the oem cut studio. i love roland cutters. i have a love hate for printers. for me the printer speed is to slow and the technology in nozzle redundancy for roland is years behind. but the cmyk lc lm gamut is awesome. But roland docent make the monsters any more .they make the baby 1.6m only. have fun printing and remember printing takes time.

@leestuart38

3 жыл бұрын

I'm well aware of how to use illustrator and the Roland plugins for it. The machine itself is the issue when it comes to the cutting aspect, it has very basic features.

@leonardo29098

3 жыл бұрын

@@leestuart38 roland does not give u all the functions in print and cut machine. They reserve the addition features for their pro line cutter aka gr640. But its a very nice machine and the new vg2 inks are on the wow factor. U love the machine over time. The Only feature u will miss on the gr640 is tangential emulation and perf cut. And the super nova speed. That why I love and hate roland printers and cutters all in one combo. I went the other route. 2 units. Much better setup. P.s. take the maximum warranty extension u can get. The support is worth it

What cutting problems are you having. I have had a roland for 5 years. It can be tricky and there are some tricks you can use to help that

@leestuart38

3 жыл бұрын

Mainly the perf cutting, it really sucks at that. I know that's not really something it should be handling as daily work but I wanted to take advantage of its ability to do it until I could get a cutter, most of our customers want stickers and I will not make anything other than die cut because kiss cut stuff with big squares of paper around it looks cheap and unprofessional in a retail setting. The other thing is it not having tangential cutting, it's crazy to me that a machine of this cost doesn't have it when my cheap little 24" graphtec does. It makes a world of difference on anything with corners. I think the best plan of action is wheeling a summa machine in here to take over the cutting duties

Hi Lee, question about that printer. I am amazed watching those colors, that pitch black is amazing. Do you see any grains in the print? or is like a solid color? I have a versacamm vs640 and I can definetely see grains when I tried to print a solid color. Its maybe a config issue, I dont know really, but I know you were dissapointed at the beggining with the quality. Let me know. thanks!

@leestuart38

3 жыл бұрын

My black is about as solid as it gets, but that's easy for most printers. Color will never be 100% solid but highly visible grain is a problem, I see it in almost every sticker or wrap and that gets redone by us haha. It's a combination of media/printer setup and the setup within the software. I run this thing at as many passes as it will do to get the colors the way I want

@macinons

3 жыл бұрын

@@leestuart38 Thanks for the quick reply man! you use Versaworks or other RIP SW? I need to check how I can increase the number of passes. Love that wrap you did, please show us more vids like this one ;)

Somebody needs to replace a 9Volt battery somewhere LOL

@TonyLoewen

3 жыл бұрын

😂😂 yes

@leestuart38

3 жыл бұрын

I gave them shit for that 😂

yo what laminator you using looks like a beast

@leestuart38

3 жыл бұрын

It's the GFP 355TH

@tfaindustries1523

3 жыл бұрын

Lee Stuart thanks

How much is the machine

🇨🇦Dream Team🇨🇦 🙌

@leestuart38

3 жыл бұрын

🙌🏻🙌🏻🙌🏻