Chế thuyền hai thân từ xốp sử dụng 2 động cơ Diesel Crafting boats from foam 1700cc kzread.info/dash/bejne/foCDvNWzZabdl7w.html

@Jonathan.D

2 жыл бұрын

You know I am going to ask you to build a hydrofoil! I know it will be awesome! I was also thinking about how awesome it would be if you switched the gas engines in the big twin hull boat to a pair of electric motors from an electric car. Maybe you can find some from a crashed car if you can't get new ones cheap enough. As always I love the work you do and can't wait to see the next one.

@user-wt1ep9vi6p

2 жыл бұрын

Лщ

@user-wt1ep9vi6p

2 жыл бұрын

Лллллллщщщщлщщщ

@user-wt1ep9vi6p

2 жыл бұрын

Ллллллллллл

@user-wt1ep9vi6p

2 жыл бұрын

Ллл0лзлзлллллллл0лллллллллллллл

Brilliant backyard engineering project and superb use of available materials. Well done

Parabéns! Ótimo trabalho. Você é um grande engenheiro. Boa sorte! Good Lucky!.. From Brazil.

Cách hát của Phúc hiện đại, tinh tế và mang hơi hướng Kpop nhưng lại rất ấm áp, dịu dàng...1 ca khúc tuyệt vời

Living on the river is a blessing in so many ways. It becomes part of what you are. It gets in your soul and you can't do without. Another fun little ride. Tear it apart and do it again. Good job.

I'm pretty sure you've been told this before! You do incredible work with your available materials! Inspiring!

@shubhamranaware9203

Жыл бұрын

Did he pull out those thermocol sheets?

Well done, I'm very impressed. I loved watching this. The fact that its electric powered is Friggin awesome.

Qualidade e simplicidade com um barco prático e econômico... Parabéns.

Parabéns pelo excelente trabalho 👏👏👏👏👏

Amazing seeing him works with such expertise brings a tear to Me eye WHY I could have made a canoe boat instead of spending £ 700

I never imagine that streofoam can be made an electric motor powered boat like the one made of wood. Great job!

@nathanmciver6496

2 жыл бұрын

Yeah, he did such a clean build!

@kf4293

2 жыл бұрын

Rather interesting what he did with the angle grinder, using its gears. Hmm 🤔

Es un ejemplo a seguir estos chicos cuando los tiempos de crisis los convertirnos en oportunidades, eso es hacer un mundo mejor. Los felicito...

This is what you call raw talent! Love seeing the things that this You Tuber makes. Never a dull video! Great job!!!!

Love watching you work! Made my lunch break very relaxing and fun!

@Nasatchannel

2 жыл бұрын

Thank you very much!

This guy is the real deal, incredibly intelligent to construct such a craft! Fair winds brother!

@user-do4fr9ks7j

5 ай бұрын

ผมอยาก ดู 2 ใบจักร.ครับ ลุยคลื่น กึ่ง เรือดำน้ำ ครับ

I like you peoples skills and ideas every time you come up with. You having amazing talented gifts from God. I can't believe that little motor had so much power to drive that big boat.

OUTSTANDING!!!!! I really enjoy watching your work. Thank you for taking the time to make and share this video with us. Tom

Love the ingenuity in your builds!

Orimo projeto, estou te seguindo aqui do Brazil.

Thật không thể tin nổi sự chăm chỉ và khả năng của các bạn

Amazing! I would not have believed that such a small electric motor would be so powerful! Well done!

Very interesting to see your design skills improving in each video. Congratulations for your projects and channel!

Que placer ver tanta creatividad 👏👏👏

my dream is to have a boat like that, how cool, I travel in your videos, congratulations!!

Công việc tuyệt vời mà tâm trí của bạn đang vận hành theo một chiều hướng khác. Xây dựng nhiều thứ hơn.

Hi nice boat you made ! i am amazed and paying you full of respect on having the boat complete. I am wondering what material did you put right after the styrofoam ? like i know there are glass fiber layers with resins brushed ... is the material a plastic panel? Thank you

Thank you my friend for sharing the update of the new project of the manufacture of a foam fishing boat with an electric motor. Your potential for creation, design and manufacturing is incredible. Friend, consider working in a maritime, automotive or aeronautical company. Good evening and Happy Holidays !!🥇

@Nasatchannel

2 жыл бұрын

Thank you very much! I will try to develop more, hope everyone will always support me!

Very very cool! Love the idea. Light aircraft wings are skinned in foam and fiberglass. I wonder if the structural integrity could be assessed to make a little bigger boat you could use a small outboard. I'm thinking the endurance of those batteries is minutes not hours.

Спасибо за ролик. Здорово. 👍

What type of plastic is the material you use to protect the polystyrene from the resin? I love your boats I'm going to try and use your method to make one of my own. Thanks for all the great projects.

@kalingayuvraj1700

Жыл бұрын

What are the chemicals and products used ..reply pls

Excellent well done sir. blessings from London UK

@Nasatchannel

2 жыл бұрын

Thank you very much!

Te hago una pregunta. ¿con que unes la fibra con la espuma ? gracias exelente canal. eres una inspiracion 🎉🎉🎉

Você e um Gênio. Parabéns pelo seu conhecimento.

Muito bom. Quanto de resina e fibra de vidro usou pra fazer o barco?

@chazguy8723

Жыл бұрын

4

Ficou perfeito, mais um inscrito. 🇧🇷🇧🇷

@user-yp5ym7wz8x

2 жыл бұрын

Он врунишка

Felicitaciones amigo!!!!….muy bien logrado.

Thích thật, em rất khoái chiếc như vậy buổi chiều chạy vài vòng hoặc câu cá.

Браво Мастеру! Золотые руки!

@Cepera03

Жыл бұрын

Через 1 год всё разболтается . И эта лодка только на помойку годится!

*Tuyệt vời luôn*

@Nasatchannel

2 жыл бұрын

Cảm ơn bạn rất nhiều nha!

Какой трудяга . Молодец , класно .

Excellent performance and good work

simplesmente fantástico

I'm amazed at how small the motor is. Good job well done. I would have liked to see some flotation chambers in case something goes wrong. I would wear a PDF floatation jacket. When stuff goes wrong on water it goes bad really fast. Although being foam the boat itself won't sink. Next add some solar panels (on a roof) and you can go forever.

@jeffdray2500

2 жыл бұрын

the entire boat is a flotation chamber. if you smashed it into a hundred pieces it would still all float. it's formed on polystyrene, can't be more self bouyant.

@Poppy_love59

2 жыл бұрын

@@jeffdray2500 You beat me to it, was gonna say the same thing!

Félicitation très bon travail, j'adore voir le génie de certaines personne !

Pure Genius young man. Awesome 👌

Your new friend here from Philippines, im very interested on how you make your boat out of foam... someday maybe I can copy your design... very detailed and clean...

@pa_maj.MARTINI-van-MAN

2 жыл бұрын

It's actually made out of fiberglass, the foam board was used for the mould 👍

@i1uvpreppyxo887

2 жыл бұрын

@@pa_maj.MARTINI-van-MAN Not a mould is it? It's a foam core between glass laminates from what I saw. Is that not correct?

@pa_maj.MARTINI-van-MAN

2 жыл бұрын

@@i1uvpreppyxo887 What I see at 1:49 does not match that at 3:15. It looks like he's used at least two different boat building videos in this one. If you look you will see the First images of the bow are cut neat and not many sections used, in the later clip he has all sorts of cuts at different shapes. I've watched so many of his videos and different techniques that I'm actually not sure on this one anymore so you could be right Tim. I also thought the plastic he was using on top of the polystyrene was for easy removal from the mould/form but it could also be to prevent some melting of polystyrene from the wet polyester resin, an application of PVA would ( I think ) be a cheaper alternative and work just as Good for that. Seeing the thin section that he cut through at 3:19 tells me that the raised section beside it is the polystyrene from the beginning and the centre section was removed later for where the engine goes. So Tim, you're more than likely right and I got it wrong, I do remember questioning a few things in this video, probably because of some of his other videos with slightly different techniques towards his boat building leading me to jump to the wrong conclusion, oops! Edit... After reading the comment that I replied to ( Marion Farmer ) I may have been suggesting that the boat itself is actually a fiberglass boat built by forming around a foam core, mould or template. A fiberglass boat built around a foam core would have been better wording but it was late and I know that I was tired, but hey! It was a while ago Tim, who knows what I meant or thought, I'll try to be more careful hehe 🙂👍

Parabéns pelo trabalho. Qual a autonomia da bateria? Quanto tempo dura?

@enbusquedadelgranpez7696

2 жыл бұрын

Esas maquinas no sirven para andar una hora seguida y más con el peso de la elise el bobinado se quema muy rapido

Amazing how much people love thier life! At any level this is hard work! Dosen't matter if its one starter, one project, thats one thing that could make yourself or somones elses treasure find worth while! Way better than old staged food to plague minds! Im aware what it takes to accomplish this type of work at any level! Thr additives are wasteful! Love to see any hardworker that might not have off recieved much live thier life rich and have fun! Motivating!

Thuyền đẹp quá

Круто 👍

Great video, the river you live on is perfect for such a small boat , lucky you . Hope you are a good swimmer didn't see any life jackets , sorry old man here , safety first ☺

@Jonathan.D

2 жыл бұрын

I mentioned the same thing in one of his first videos. I grew up working on the water and have seen too many people die from not having some form of PFD. In his defense, I will say that in the video after my comment he did start wearing a vest. Having lived in Vietnam for a few years I can say that unfortunately, safety is not a priority. When no one else is taking safety precautions it can be easy to forget. It's hard enough to get people in the states to wear one.

Sangat bagus kerajinan nya mantap👍 resin apa yang di pake nya🙏🙏

Wow that's awesome that little boat looks so nice for me to go fishing in my island Puerto Rico.

Quá đỉnh đỉnh, chắc làm thử 1 chiếc bằng In 3D quá.

@Nasatchannel

2 жыл бұрын

Cảm ơn bạn rất nhiều nha!

Muito boa ideia eu fiz um para mim com motor de rabudo

Nice and simple but very useful

Great and well done. thanks from 🇬🇧

Que top, poderia passar a lista de materiais utilizados na parte Elétrica?

Lol... I’ve watched so many of your videos, that your soundtrack is getting on my nerves. Could you please vary the music selection a bit (pleeeease...). Love your videos though (just sub’d). Wish I had half of your skills.

Молодец парень, у тебя золотые руки

терпение и труд всё перетрут. Моё уважение 👍

Muito legal mesmo, parabéns.

This is a very good job~

@Nasatchannel

2 жыл бұрын

Thank you very much!

@orogyeleeonly7405

2 жыл бұрын

앗 석면!

Awesome...!!!! Love it....!!!! Great Job, your a Boss...!!! 👍🏻

Tuyệt vời

Ouch, 700w unloaded! you must fix the vibration issue and apply fresh new grease to all moving parts, your friction losses are way too high. But that doesn't matter, it gets the job done, love your videos, keep it up! Edit: Just realized you actually used new grease, you should try replacing the rubber flange with bearings, fix the alignment issue and everything should run smoothly, less mechanical losses.

@Nasatchannel

2 жыл бұрын

Thank you very much, I have found and fixed the grease, but there are still some places that need to be fixed like you said are rubber bearings, I will fix it in the next video, hope you always support me!

@christianpaulroldan4010

2 жыл бұрын

Those vibrations are called critical rpms, you should avoif it as much as possible even good brand engine have criticals rpms. Its normal rpm, you just have to mark where it starta vibrating and avoid it.

@Eden_M

2 жыл бұрын

@@christianpaulroldan4010 Yup, the RPM at the motor shaft seems fine, what's critical in my opinion is the prop-shaft and should be aligned or replaced, it's probably bent.

@christianpaulroldan4010

2 жыл бұрын

@@Eden_M i think shafts are good. . Rotating machine do vibrate when they are not secured properly and you will notice criticals vibrations need to avoid. With the help of bolts and clamps everything should go well. . Thats my opinion i respect yours.

@safarieten

Жыл бұрын

BOLLOCKS !!! Mr. Knowitall !!!

Muito bom seu barco

I admire your abilities at mechanical engineering, that boat works very well on the water nothing bad

yet another great video. you have now fully convinced me to make my own boat.

@bubbawatson1852

2 жыл бұрын

Same here, little light, one my dog can ride aswell, never know, a flood, are just fun.

Muito top seria melhor ele colocar um sistema de placar solar pra já poupar bateria

@promoveislar2802

Жыл бұрын

eu também pensei nisso.porque fiquei pensando quanto tempo a aquelas baterias vão durar

Qual o custo no seu país? Muito bem feito mas aqui no Brasil sai muito caro

@pescadoresdecorpoealma2659

2 жыл бұрын

No Brasil tudo sai caro o país fdp tem nada barato aqui kkkk

@tieue8842

2 жыл бұрын

Việt Nam , mấy vật liệu này cũng không đắt

@marcelomart1056

2 жыл бұрын

A eletronica e motor vc encontra no Aliexpress o resto não sai caro, quem tem experiencia com fibra de vidro faz um bom projeto aquatico.

Ты молодец, привет из Беларуси!

Thông minh. Thật là thông minh.😄😄😄

Восхитительный результат.

@Nasatchannel

2 жыл бұрын

Большое спасибо, надеюсь, вы меня поддержите!

@user-ek6qr6fh9i

2 жыл бұрын

До первого подводного препятствия. И кирдык#

@user-ek6qr6fh9i

2 жыл бұрын

Из цельного баобаба вернее будет.

Quais matérias são usados para fazer o barco? Reponde 🙏🇧🇷

@marcelopires8838

2 жыл бұрын

vê o vídeo de novo, parece q vc só viu ele já pronto...

@EdenSales1997

2 жыл бұрын

@@marcelopires8838 não parceiro, apenas não sei o nome de alguns msm. Tmnc

@namchau7718

Жыл бұрын

Comaxit

Me encanto, quisiera tener ese conocimiento. Un groso!!!

Nice 👍👍 greetings from Croatia

@Nasatchannel

9 күн бұрын

Thank you so much!

Are you using Epoxy or Polyester resin for building?

@Nasatchannel

2 жыл бұрын

i used polyester resin for gluing, but i pasted pvc sheet on foam so that foam won't be corroded by polyester resin

@LouisBackover

2 жыл бұрын

@@Nasatchannel there's a trick to Appling epoxy to foam without coroding the foam if you don't want to use PVC. You can paint the foam with simple laytex house paint for thermo protection, then apply epoxy and glass. (Hoping Google translates that property). Reason why I asked is that polyester resin is much less expensive than epoxy on the US where I live, but I've often heard it wasn't the best choice for this type of project.

@Jonathan.D

2 жыл бұрын

@@LouisBackover Having a background in this type of construction I can tell you that using polyester in the manner you described is a disaster waiting to happen. There are two main reasons. One, if there is any spot where the resin can get through the paint it will eat up the foam on the inside. Two, the epoxy and fiberglass will delaminate from the foam. Both reasons one and two are due to the fact that foam is hydrophobic and will resist bonding with the paint. The way he's doing it will also have this problem but he's making these boats on the cheap for his videos. However, his method is still much stronger than using laytex paint. This hull design doesn't have a rigid stringer system. This means the hull will twist and flex with minimal effort leading to rapid and increased delamination. That's why high-end boat builders switched from injected foam and foam board to the honeycomb & vacuum bagging system to add rigidity to the hull. The honeycomb material fully adsorbs the resin. This stiffens the honeycomb and gives it better adhesion to the fiberglass.

@i1uvpreppyxo887

2 жыл бұрын

@@LouisBackover Vinylester would be the happy medium wouldn't it? More waterproof than poly resin but much less expensive than epoxy.

@colin-manyeates-clan5221

Жыл бұрын

@@LouisBackover My understanding is the Poly is more brittle and deterrrorates/cracks faster especially in the sun.. although if you can slow down the curing then it is much more flexable.. by doing it at night when it is cool. This works for both types but with poly it is really tricky cause it has to "kick" completely or it stays sticky... Best to test how long you can slow it down and under what conditions. For me a boat flexes. Period, so you want it to be flexable, rigged but flexable not brittle which is why you need to lay carbon fibers a certain way. Epoxy is really expensive and a bit heavier at least it feels like it if I remember correctly, but it is more flexible and usually lasts longer without cracking which leads to water getting in. Can't tell you how many boats I've worked on where they used wood and then put fiberglass over top and the wood rotted out. A good latex paint is a wonderful secret but again I have a technique that requires time but lasts tens of years. When I used to do boats I would thin out the oil base paint a lot then soak the wood with three to five layers depending on how much the wood drinks. Then when tacky but not "dry" I do it again with one to one thinned, then one quarter thinned and finally 10% thinned. With oil I found that some thinning works no matter what. I will do something similar with Latex but no more than one to one and them I will layer full strength but every paint is different and if you layer on too thick it will cry and droop but if you get it right it is like a thick plastic bag over everything. Then I'll put the skid wood on top to protect the paid from scuffs. Back to fiberglass. I learned that less is more, in fact many places use a vacuum bag to suck out all the resign or squeegee to squeeze as much as possible.. it's hard to do if you are used to using more resign like paint but it really works so much better an less cracks, less weight. Bizarre I know but I know guys that do surfboards and man .... Oh, I usually will do as much as I can in one cast because when you layer invariably those layers will separate or bubble etc.. But you can let is get a little rubbery and add the next layer... Hope this helps.. Blessings

Thấy con motor tp là thấy hơi chua rồi

Exelente eres una inspiracion saludos de peru

Good for fishing..... 👍🏻

Mình rất thích nội dung này vì đang tìm kiếm. Nhưng nó không có nói hướng dẫn giống như nội dung trong tháng 5 bạn làm sẽ thích hơn.

И мне все это интересно - молодцы пацаны!!

Красава мужик, мастер своего дела 👍

@user-os6zw7tr1e

Жыл бұрын

на попутной волне зальет.и плохо если на винт намотает

Meus parabéns, gostei muito achei incrível.

FICOU TOP PARABENS

Tàu anh làm càng ngày càng đẹp và chạy nhanh nữa🤩

@Nasatchannel

2 жыл бұрын

Cảm ơn bạn rất nhiều nha!

Мне очень понравилось . Молодец .

thats incredible .great video and great job. your very talented mate. wish i could do something like that

Beautiful job as usual

Your making an Amazing Boat from foam with electronic control, may be I will try to make later, more power to you....

Hi! I like your idea of making very simple boat! I love it ❤

Inovatif.. i like' your inovasi teknologi inpirasi bro.. tank you video canel

Waw....sebuah karya yang sangat luar biasa...ferfect....nice job..banyak yang pesan ini...

Nice. Thanks a lot actually. It worked, you explained it well. Thank you

i would love to know more about this stuff. such a tiny motor really impressive.

와우 대단한 사람이구만요. 고맙습니다.

First of all, there are a lot of performance parts to upload a video. But it's great. I don't think it's possible to go around 5 minutes with that battery. In any case, it is a video that will be of interest to subscribers who do not know these details. Great!

Вот умничка и рукодел !

Someone where you live should make you the Minister of Transportation. Good job!