Making Christmas Screwdrivers !!
Ғылым және технология
#YTMakersSecretSanta
Tis The Season to... build something! Follow along as I try to figure out what and how the heck to make a Christmas gift.
spoiler: it's screwdrivers.
See if the screwdrivers break on Sam's channel:
• FLIP DOT ETCH A SKETCH
www.youtube.com/@LOOKMUMNOCOM...
And check out Becky Stern's great channel! Thanks again Becky!
/ @beckystern
The whole playlist: • YT Makers Secret Santa...
music:
Canon&Variation / Twin Musicom
Duck In The Alley / TrackTribe
Пікірлер: 1 500
“Wake up Babe, This Old Tony uploaded”
@smashyrashy
Жыл бұрын
Lol if only she got excited over the same things
@NZobservatory
Жыл бұрын
Sorry, it’s been so long since Tony last uploaded, Babe died of old age.
@JETHO321
Жыл бұрын
@Oddworld You channel spammers are the lowest of the low.
@spammerscammer
Жыл бұрын
"Stop coming on my property we got a divorce 4 years ago"
@doug8766
Жыл бұрын
Ya, I talk to myself and my multiple personalities too.
THANKS FOR THE SCREWDRIVERS TONY. I can't promise I won't mess up any more screw heads but I'll try 😂
@LOOKMUMNOCOMPUTER
Жыл бұрын
They are amazing screw drivers. I have learnt a lot watching this. I was not even aware the differences of screwdriver types. Mind blown. I will cherish them. Thankyou again
@Broken_Yugo
Жыл бұрын
You can buy sets of bits ground that way as well, mainly sold as "gunsmithing screwdrivers" from what I've seen.
@jamestrebillcock4718
Жыл бұрын
Wow, its look mum no komputer
@Zebra_M
Жыл бұрын
Now that you have the proper screwdrivers, nobody will be able to complain you don't know what you're doing! This is an awesome development
@jamestrebillcock4718
Жыл бұрын
@@Zebra_M yeah he might be able to take a pipe organ apart properly now
Once again, the subtly tapered puns, the finely machined humor, and the editing on spec, makes my Christmas whole
@zoeylamant8298
Жыл бұрын
i wouldn't say the editing is in spec, but it's holding the tolerances.
So fun bit of trivia, the reason why hollow ground screwdrivers are sometimes done in this flat plate style is because it makes dressing and reshaping the tips much simpler in the end-user's shop. It provides a pair of dead flat faces, so in similar fashion to how you fabricated these, the end user could clamp them down and reshape the tip without losing parallelism. This was especially critical in the days before mass manufacture of fasteners, as each one was essentially custom sized, so if you were a gunsmith tasked with fixing up whatever finely finished hand crafted double rifle wandered into your shop by way of London or Belgium or what have you, you'd often find yourself needing to grind custom sized screwdrivers to not risk marring the finish. Nowadays it's mainly retained out of tradition, but it's still nice to be able to custom fit tools to the job.
@NBSV1
Жыл бұрын
The good thing now is being able to get individual bits. That way you can hollow grind them as well as custom fit them to a screw without it being such an investment like a whole screwdriver. Having a hollow grind that fits the slot just right as well as being the full length of the slot really makes a big difference.
@eamonia
Жыл бұрын
Cool...
@morealias
Жыл бұрын
Nice. I love learning the backend stories on the "why is this done this way".
Yaaayy Tony! I'm so glad you like your gift! Thank you so much for the generous channel plug. Happy holidays.
@stanwooddave9758
Жыл бұрын
So, does this mean we the youtube viewer's will see a "Spin-Off," Becky versus the old-man TOT. (Sorry Tony, just had to throw you under the bus.) 😜😜
@waitemc
Жыл бұрын
Beep boop beep boop beep beep
@CM-xr9oq
Жыл бұрын
Very cool gifts! Excellent work!
@ptonpc
Жыл бұрын
"Merry Christmas Becky" *whispers* 'Totally a cyborg!'
11:01 Tony, you have to be strong now: band saw blades are meant to be changed while the saw is *_not_** running.*
@tonysansom
Жыл бұрын
Those plasters! 🤣
@Mr.Sparks.173
Жыл бұрын
Look, I may only have 0.4 hands left, but I still think turning the saw off is an optional step
@Vengetuen_Wraith
Жыл бұрын
@@ganamena2832 wtf was that
@Cancun771
Жыл бұрын
@@Vengetuen_Wraith Unrelated spam for his own moronic channel that had nothing to do with anything.
@Mr.Sparks.173
Жыл бұрын
@@Vengetuen_Wraith spam bot, that's what.
Tony your comic abilities and way with words is fantastic. The unspoken comedy of putting on bandaids when talking about the dangers of switching a blade but not talking about the injuries is incredible and why I will watch every single upload posted to this channel.
@chippysteve4524
Жыл бұрын
The reason they're called Bandaids is because they were originally developed as protection when changing bandsaw blades to prevent catching/transmitting BANDsaw AIDS.
@RoboSkyrat
Жыл бұрын
@@shawbros whoops, shit happens all fixed
Your presents are always some of the best, Tony. It's good to see you up and about coming out of your hide hole for secret Santa.
Man we are dying to see new content from you. Really, no channel can take your place for me, no one produces the type of content that you do.
@smallshoptalk589
Жыл бұрын
There is another.
@caseysmith1718
Жыл бұрын
@@smallshoptalk589 who?
@OlaMagnusLie
Жыл бұрын
@@caseysmith1718 None, that's who. Small Shop Talk's talking ox manure.
@Golgi-Gyges
Жыл бұрын
Inheritance Machining
@onefortheroad2291
Жыл бұрын
@@Golgi-Gyges inheritance machining is a good channel but This Old Tony it is not. A lot of the formula and ideas are lifted directly from ToT but it lacks the soul and humor of Tony. A good channel on its own, but kinda “borrows” too much to really be its own unique thing
Oh how I've missed you Old Tony! Thank you in advance for your wonderful content
@greeceuranusputin
Жыл бұрын
"Oh how I've missed you Old Tony! Thank you in advance for your wonderful content" It might be another year...
We're not worthy. THIS OLD TONY Christmas special. 30 minutes absolute awesomeness. Thank You!
We hope you enjoy your gift from Becky Stern. If you ever have any wire to bend, let us know. Happy Holidays!
There are channels that I see posted a new content and I react “cool, I’ll have to watch that later”. ToT posts and I immediately rearrange my schedule to watch it as soon as I can. It’s like a great movie you were excited to be released in the theater. The world needs more Tony
@r.h.b.4980
Жыл бұрын
I did just that was headed to lowes for some supplies to build my utility trailer conversion and saw ToT just released a new video and I sat down in my garage to watch it 🙃 glad I did. ToT is one of the greatest on KZread. Wish i was half as good.
@scottstacey1008
Жыл бұрын
Me too - EVERY TIME
@doublepenn5732
Жыл бұрын
I was like NFWho and hope it's just pee in the diaper.
@tomasjosefvela1
Жыл бұрын
I rescheduled my funeral..... it's o.k., i was going to be late anyway and I was surely going to forget my head... I'll show my self the door please and thank you.
@thomasstuart2936
Жыл бұрын
To be fair, the guy on the operating table wasn't getting any deader.
The band-aids popping up on your hands after talking about changing the bandsaw blade had me laughing hard. Really wasn't expecting that
They came out really nice! And watching LMNC basically moan when using them on the screws they where made for was priceless! I _really_ enjoy these Secret Santa videos! Thanx for all the great content! And happy holydays TOT! Greetings from Norway!
Merry Christmas to ToT, Mrs ToT, the tiny ToTs, and the extended ToT family.
Tony I cannot emphasize how much I love your videos.
Tony a good tip on cutting sheet metal on a bandsaw quietly is to put a thin piece of wood under the sheet metal and cut through both at the same time the wood will absorb the vibrations and greatly reduce the noise especially the high pitch ones. Also reduces burrs on the underside of the cut
@sophiophile
Жыл бұрын
It's a good tip, but I don't think it does anything except for the noise (doesn't improve blade life if you are cutting properly). And you know it's all gonna get hand finished, so burrs'll be gone no matter what. (I usually just abuse a burnisher to rub and cut them off)
I just love it when peer pressure or your mortgage payment forces you to make a video! Merry Christmas, Tony!
My dad is a gunny. A lot of those tools are just really handsome pieces of kit.
The most impressive thing about Sam is that he records, edits and uploads videos to KZread with nothing but a rotary encoder and a tesla coil
@taunokekkonen5733
Жыл бұрын
That was before he bought a brand new fax machine!
@neilatkinson174
Жыл бұрын
@@taunokekkonen5733 that was when he went to 4k footage
Oh.. How nice to receive a Christmas present from Tony like this on a Sunday evening. A new video to watch during the evening. Greetings from Sweden 🇸🇪
The scale milling sequence had me laughing my head off. Always such great content and humor.
So glad you folks do this, love your channel and love seeing the other makers that you exchange with. Merry Christmas to you and your family, and thanks for keeping us all entertained and educated.
Your sense of humor is so on point. Sharp wit and learning from the school of hard knocks has done right by you. In the hallowed halls of gift makers you have a strong grip on your craft and handle the pressure of the deadline really well. Thanks Tony!
There are some days where you feel like something is lacking, but then when you get a This Old Tony video, that feeling goes away.
Thanks, Tony! Always love your content. Merry Christmas to you and your family!
Those tech colabs are great! Really heartwarming.
Thank you, Tony. Your videos are always a treat, and I actually learn stuff. Not having a shop, I may never use any of that knowledge (except trigo...e.....y errr ummm shop math), but you never know. Happy holidays.
Yasss... this is Christmas gift that we need though not the Christmas gift that we may deserve!!! 😅😬😛 Thank you, Tony! You're missed!
@rubiconnn
Жыл бұрын
This is the christmas gift I both need and desire.
@alexisrivera200xable
Жыл бұрын
@@meatcanyonofficalI BOT SPAM DONT CLICK
I was already going through the third cycle watching old ToT videos and finally, there is a new one. Absolutely worth waiting for!
They turned out beautifully. Thoughtful present too. A very merry Christmas to you and yours.🧑🎄
"... wood, plastic, people..." 😂. That was my favourite little quip, but as always as ever, I am thoroughly entertained, wholly impressed, and have also gained some knowingledge I didn't have before 👉👉👉. Thanks Mr. Tony 🙏🙏🙏. Merry Christmas to you and the clan, and don't leave it so long next time, okay? We miss you in this time period 😉. 😎
Endless Love to you, old Tony! Merry Christmas to you and your loved ones!
It took me a few minutes to remember which of my other favorite makers had a custom screwdriver: Hand Tool Rescue.
Thank you for putting out another video!! The time between them is excruciating. Always looking forward to the next TOT vid. Wishing you and yours, Merry Christmas 🎄!!
It truly is a Christmas miracle when This old Tony puts out a video
This is again the highlight of the new best part of Christmas, thanks ToT, now to watch the rest of ‘em
Merry Christmas Tony. Thank you for the gift.
I have had so much fun following this ring. My day after boxing day treat. It's so wholesome to watch a group of diverse extroverts, all come together, and document it for us mere mortals to watch. Thank you and merry Christmas 👍
Finaly! I was wishing for secret santa video from TOT. And now it came true 😁 You really insipre me with your aproach to custom bults. Why go to the store and buy something, if you could just build it on your own, and ofcourse learn something in the proces. Happy holydays TOT! 🥳
So good to see you back That old Tony! Here’s to a happy holiday for you and yours!, and a 2023 filled ToT videos for us!??! Side note, had to come back and edit this. Friggin brilliant detective work. The fact that you put thought into a gift that is genuinely needed by the individual, and fills a unique need in their life just highlights why you’re so special, and why we all love you so much.
Merry Christmas ToT. Thanks for your part of 22. Hope 23 is a better one for us all.
it's great to see content from you. you really kill it and I love your rhythm, keep up the awesome work!
What an inspired gift for Sam! Love the comedic timing in your videos always!
Love the Tap Wrench Appreciation Day celebrations!
Thanks Tony, Your videos are always a gift! Great to see you back in the shop. Have a Merry Christmas.
Maybe the flat shape of the screwdivers you found on the internet provides more torque control because of reduced twisting of the shaft, and also prevents deformation of it. I use screwdrivers of smaller sizes a lot in my job, and I might or might not exaggerate with the tight fit. Worked out most of the time though. So I have experienced that a lot of force on a thin shaft is usually not that great, it bends and twist loosing a lot of force due to its flexibility. A downside to this may be that you won't be able to stick it into small holes when the screw sits inside it, the diameter is important there.
This video is probably the best Christmas present I'm going to get. Thank you very much. I've missed your content a lot
What a great gift. Always like your work. Thanks for the video. Merry Christmas tony.
Tony, re the warp-bend. You can use the temper and shim method. Clamp to an angle iron strong back, shim at the bend, over clamp past straight, temper oven cycle. It will relax the warp out. You can keep increasing the shim in several temper cycles and creep up on the right amount.
Christmas only comes once a year, so you’ve got to step up on the video production ToT. I love your work!! Merry Christmas!🎄🎁
I’m going to gift wrap my phone and put it under the tree so on Xmas morning I can watch This Old Tony whilst everyone else opens their crappy presents, Cheers Tony your the best 👍
TOT is a Christmas Gift in itself! So good to see you again! Happy Holidays to you and your family.
Merry Christmas to you and the family TOT
Oh ToT I have missed you bro, by far my most favourite channel, it’s not just the skill of making things for me, it’s the brilliant humour that is slipped in as well, “Sitting on the John, holding my uni-selector of course, what do I spy with my one good eye” 😂😂😂 “I couldn’t sleep with myself” and the bandaid covered fingers are all gold in my opinion. I really do hope you get back to a point of doing more videos, Merry Christmas to you and all your family. Cheers from Australia
I absolutely love the way tony makes his videos. The way he pulled out the steel out of his sleeve when he said he had an ace up his sleeve was brilliant and made me actually laugh not just blow air out my nose lol.
@andrewdynes5300
Жыл бұрын
BAOMN!
Meery christmas Tony! Always nice to see a video from you!
Hi Tony, Happy Holidays, nice to see new content!! Hope the new year brings out the TOT we all love to watch! Hang in there, we all love you!!!
This, in combination with the other makers is one of the most wholesome series on KZread ever year, I love it! Looking forward to watching the other videos.
@scootersfrog
Жыл бұрын
ill give ya another to check out on the artsy side check out @TenHundreds art collab projects
Merry Christmas Tony! Hope you and your family are doing well :)
I really love how you keep us super focused while just showing us the actual thing in front of you.
Merry Christmas, Tony and fam-looks great!
Look who's back! 😁🤩 your videos are always a gift for me. Merry Christmas Tony!
@ThisOldTony
Жыл бұрын
You too!
Tony, you we always be my favorite KZreadr of all time. Merry Christmas to you and your family, friends and pets.
This whole Secret Santa maker-mix is a great idea!
I don’t know what’s been keeping you from making more vids but just glad to see your creativity shine through again!
I was just noticing it's been a while since an Old Tony video. Glad to see you are still doing this.
Merry Christmas, ToT. Thank you.
Hey Tony! Great to see that you had a chance to get a video in. Thank you for sharing, as always. Hope you have great holidays with your family, and hope that Santa brings you more time for content creation in 2023.
As I get older, and apparently as Tony does the same, the diminishing joy of Christmas is offset by an obligatory ToT video. 😁
You made Sam a paint can opener and a pry bar! How nice!
What a nice winter, Christmas, cozy Sunday present from ToT 🤩 I've been waiting for this year's secret Santa version on tenterhooks just to see your video, Old Tony. Thanks for bringing joy to my life, This Old Tony. Peace and love from Syria ✌🏼
Merry Christmas and a Happy New Year Tony to You and Your Loved Ones. Cheers from Down Under
As I get older I'm running out of time so I find myself rarely watching youtube videos much longer than 15 minutes. However this one seemed sooo short! Thanks ToT, best compliments of the season to you and yours.
@creeperboy6453
Жыл бұрын
I'd like to order yogurt gelato with jam, thank you
I'm sure I shouldn't ask but, since this is the season for giving, perhaps you could put out more content? As I recall I used to watch your videos every Saturday morning. It just seemed like the perfect end and beginning of the week. Merry Christmas to you Old Tony.
@andrewdynes5300
Жыл бұрын
(British accent) Please sir, we want some more
The animations were awesome to demonstrate your point. Such a thoughtful gift too. Thanks for sharing this one with us.
Do you know, what I wish for this Christmas? More TOT uploads.
@richardj163
Жыл бұрын
Not just you, all of us too!
Have a wonderful Christmas and a very Happy New Year Tony!! Thanks for the video...made my whole week better !!
seemed like the perfect end and beginning of the week. Merry Christmas to you Old Tony.
Laugh hard at all the band-aids during the bandsaw talk! Great gift and hope to see another video soon!
So excited you uploaded a new video!! Please do more when you can! Those screwdrivers look awesome!
Really great to see you back, merry Christmas friend
They're beautiful!
Long time, no see, Tony! Thank you and happy Christmas! I wish you make much more videos in 2023)
Those are absolutely beautiful
thank you for the band saw information. it helped a lot to know what to buy :)
We love you Tony! So glad you’re still around. Merry Christmas to you and yours!
Oh man, the post blade change! Bravo!
absolutely love the plasters all over your hand after changing bandsaw blades. We've all been there! Merry Christmas ToT
11:01 had me rolling in stitches looking at all the bandaids. Love it!
Merry xmas to you and yours, Tony! May next year bring us more of your build videos (or else...!) 😁
Thanks TOT. Of all the YT channels I enjoy, yours is top of the list. Good to have you back, get to work making more informative and entertaining videos!
The humour and edit never fails...
Merry Christmas ToT. Keep working. Good luck!
Always a treat to see a new TOT video. That being said, for those who whine about a decline in his uploads; the man has a full time job, a family with children now of an age where even more time and resources are more in demand. I respect that family first attitude and will remain grateful for his efforts and content, past, present and whatever he can afford us in the future. Thanks, Tony!! All the best to you and yours.
@BeezyKing99
Жыл бұрын
@transmitterguy478 ... read this...
Always great to see you back Tony~
Your sense of humour is wicked. I love it.
Very nice to see a new video from you. Keep on!
I always seem to only get your channel in my feed during the holiday season when you do the secret Santa stuff. Guess I'll watch this then binge everything else you've made since last year.