Man's out here making poetry with woodworking videos

@infeelfurniture

10 ай бұрын

Thanks 😊

I am impressed by how easy you make it look to make these amazing tables. I know it is not as easy as you make it look.

Beautiful!

Good job everything is on point

Beautiful work...like always!

Absolutely beautiful work 👍

Отличная работа!!

Using the jointer to blunt the corners for the lathe tool is so clever !

Really nice!

This is sensational!

A joy to watch.

Nice tools nice work

Просто и изящно! Ручки топ🔥

Prestisyuso ang iyong pag kabuo at pag lagay ng stain .Mahusay na desensyo at ideya .Sana marami pa ganito klase ng turo galing sa iyo.Nanuod ako dito sa Philippines

Good Design

гарна робота, дарма нею незадоволений)

Beautiful ❤

Beutiful tables! Excellent video!

Классная работа.

Very beautiful

Inspired!

Congratulations on your excellent work. It was really incredible! God bless your life.

Супер, молодець.

非常好的视频，感谢分享！👍👍👍

Very nice design and neat work, thanks for sharing

@infeelfurniture

10 ай бұрын

Thanks for watching!

ELEGANTE, GENIAL

I like the modern look simple and elegant. Also great to watch a build video with nice background music 😉

@funkypunkypine

Жыл бұрын

Seriously! I'm so sick of woodworking videos with obnoxious rock music playing.

One, these look AMAZING Two, GOD I F***ING LOVE ASH

@infeelfurniture

Жыл бұрын

Thanks;)

Verry nice, perfekt work!

A wonderful Video, nice Work. Greetings from Vienna, Reini.

Great

Very nice and clean pieces.

@infeelfurniture

11 ай бұрын

Thank you 😊

Well done mate!🙏🙏🙏🙏

@infeelfurniture

11 ай бұрын

Thanks!

Bonjour J’ai adoré cette vidéo et le résultat obtenu est magnifique bravo, c’est la première que je commente mais je te regarde depuis un petit moment maintenant! Félicitations

so young and so talented!

@infeelfurniture

10 ай бұрын

Thanks for kind words 🙏

Ты молодец

Wow

Glad you're back! great work as always :)

@infeelfurniture

Жыл бұрын

Thank you 😊

I want to do this! It won’t be craftsmanship level but it will be close with a few changes. Might film it. Thank you

great work! I'd definitely avoid long sleeves around a lathe though.

Гарно!...Стильно...

@infeelfurniture

Жыл бұрын

А головне кругло! Дякую 🤗

👌👌

These are just beautiful! I'm also intrigued by your homemade router table. Any chance you'll post a video on how you made it or sell plans?

@infeelfurniture

11 ай бұрын

kzread.info/dash/bejne/poeTydyHc7LAo8o.html this video is on my channel, but unfortunately there is no detailed plan:)

❤

👌

Great work very nice but what about deformation of wood over time. ?

До речі, саме твої відео були, так би мовити, останнім поштовхом до того, що я почав організувати свою майстерню, трохи більше року тому.))) Найбільша проблема, яка мене стримувала, це приміщення. З початком війни було вкрай ризикованим винаймати окреме приміщення, тому міг розраховувати лише на власний гараж і прилеглу кімнату. Але потім побачив, на якому клаптику ти чудово справляєшся і робиш чудові речі!!! Тож всі сумніви тоді відпали, про що ні разу не шкодую. Тому моя повага за твої відео!!!! Так тримати!!!

@infeelfurniture

Жыл бұрын

Дуже приємно це читати!!! Дякую 🤗

I'm new to woodworking. What kind of wood did you use? Thank you for sharing such great contents!

В конце с креплениями ножек к ящику-НАКОЛХОЗИИИЛ!! ВСЁ ИСПОРТИЛ С ЭТИМИ ВИНТАМИ.

😲👍🏿

Love the work! so quick question, do you design the whole thing and make a blueprint?

@infeelfurniture

11 ай бұрын

Sometimes by myself, sometimes duplicate, most is my own design, but this nightstand - duplicate:)

I love your side tables. May I ask you what kind of finishing you use? By the way your router table fence micro adjustment is amazing.

@infeelfurniture

Жыл бұрын

Hi, in this case i used a product from American wood oil stain and Clear seal finish Thanks for watching!

What drawer pull handle bit do you use? Beautiful!

Great work! What was the glue you used to fix the front of the drawers with? I didnt see clamping - just a quick squeeze of the hand and they were set in place. Did you add superglue?

What kind of finish did you use, BTW looks incredible P.S. jig for the legs something what I never seen before, genies work

@infeelfurniture

10 ай бұрын

I use American wood oil, sorry for late reply 😅

I subscribe because of video graphics and background music

Nice job, you do this out of your head or do you have plans for the night stands? I would like to make them myself.

@infeelfurniture

10 ай бұрын

Thanks 😊 but unfortunately, I have no plans for this bedside😕

Que le pusiste como protector ala madera?

Какое масло для покрытия ты используешь?

Did you have a growth spurt after making your workbench and router table?

매우 아름다운, 나는 당신의 일을 사랑

@infeelfurniture

11 ай бұрын

정말 고마워 내 친구

I'm just starting to get into the hobby, but one of the first things I learned was never to wear long sleeves by the lathe--are those concerns overblown?

What product to apply at the end for the finish??

Beautiful, What kind of varnish do you use?

@infeelfurniture

10 ай бұрын

American wood oil, sorry for late reply 😅

@AlvaroVeraT

10 ай бұрын

thanks!@@infeelfurniture

Ширина ламели не должна быть больше ее высоты более чем в 3 раза. В остальном респект!

@infeelfurniture

Жыл бұрын

😁😁😁😃

@user-ze3uz3ex2o

Жыл бұрын

То же попадалось такое правило, но это если ты работаешь с дровами вроде соосны и ели, если с плотными породами то как бы ты в домике. Я разделочную доску сделал из куска дубовой доски, размер примерно 25х18, в дело не пошла из-за трещины, я думал она в трубочку свернется, а она как после фуганка, несмотря на трещину с треть доски и то что иногда по несколько дней в раковине лежит в воде

@user-vd4dh2wm7o

Жыл бұрын

Вот и ответ вам, и к тому кто смеется надо мной. У дерева есть внутренние напряжения, и они никуда не денутся (неважно аакой породы, метода сушки), если ты их не разрежишь на ламели, отфугуешь и склеишь. А ответ прост. Доска то твоя не в деле, а с трещиной)), может и не выгнуло , но треснула. Также смотри на сечение годовалых колец в дереве. Но если ты мне не веришь, возьми литературу, посмотри действительно знающих людей.

@user-vd4dh2wm7o

Жыл бұрын

@@user-ze3uz3ex2o этот ответ для тебя. Надеюсь и остальные задумаются и найдут себе правильную информацию.

@user-vd4dh2wm7o

Жыл бұрын

Также добавлю большинство тут из посетителей, действительно не знают о тонкостей столярного производства, поведения дерева.Да можно мебель делать и так. Можно и футбол играть плохой командой. Вот вам и сравнение. Смотрите профессионалов и сами растите до них.

What size router bit for the drawer pulls is this??

where did you get the ideas for this nightstand? What's the best way for me to get the dimensions/plans to build it? Thanks

Тумбочки гарнюні!!! Ясен топ, обожнюю з ним працювати. Але дивлюсь як без навушників працюєш, аж плакати хочеться.((( Я б мабуть вже оглух.

@infeelfurniture

Жыл бұрын

Та я ж у вакуумних, вони достатньо глушать шум, короче як бірюші працюють) Дякую!

@MrGriffiny

Жыл бұрын

@@infeelfurniture Оу. Я їх не помітив на відео)))). Я в навушниках Дніпро-М звик працювати. А їх дууууже важко не помітити.)))

Пожалуйста подскажи какую фрезу использовал для закругления наружных углов самого корпуса. Спасибо!

@raymondcape

11 ай бұрын

Ito po ay ang Router table bits

@user-uc6ge8to5r

11 ай бұрын

@@raymondcape размеры фрезы,радиус и так далее

@infeelfurniture

11 ай бұрын

Dimar r=16mm made in Israel

@user-uc6ge8to5r

11 ай бұрын

@@infeelfurniture благодарю от души! Желаю успехов в любимом деле!

Hey man.. I hope ur not still using that Radiator that's behind ur wood lathe.. hahaha!! Sorry but that would be funny as heck man with all that dust. I cleaned out my dust extractor/hoover this morning. Oh my lord the dust is so fine it's dangerous man.. How do u cope with that? I ended up with Conjunctivitis and it's horrific. I developed it and my thoughts are the dust caused it? I don't know if this is a thing in small dusty workshops but my nose has developed major issues too and it's not from snorting cocaine either.. heehee! I'm only joking pal. Watching u in this video I've noticed u have a good dust collection system? That's great man. Mine is pretty much a large hoover and I attempt to use it on everything. How often would u suggest a filter change on these Wet/Dry VAC hoovers. Mine is huge. hOW TO CONTROL THE FINER DUST IS A BIG ISSUE FOR ME. i DON'T KNOW WHAT TO DOC ABOUT IT.. Anyways keep up this great work. I really like these bedside tables.. What wood is this? Red Oak or something like that? I love the colou of the wood u used..

How much does a biscuit maker tool run ya and how often would you say you use it? It seems to pop up in every woodworking video I watch and it’s time to invest in one

@infeelfurniture

10 ай бұрын

this is a very useful tool, when I have it, I can find a use for it in almost every project! So yes, I recommend it!

@zpalladino

10 ай бұрын

@@infeelfurniture cost?

@infeelfurniture

10 ай бұрын

@@zpalladino I have a used one from Lamelo, from the 80s, it costs about $200-250

@zpalladino

10 ай бұрын

@@infeelfurniture thanks!

What type of wood?

Where are you from?

amazing

WHERE CAN BY THIS TABLE? Also， transfer to hongkong

@infeelfurniture

11 ай бұрын

Thank you for your inquiry, but I may not be able to ship to Hong Kong

Para saan ang iyong ginamit na spray can?

@infeelfurniture

11 ай бұрын

This is an activator for cyanoacrylate glue

Take up a collection and get this cat another light fixture

@8:11 Holy sh*t. Plz rethink this cut or some jig to clamp the piece from the top. We want you to keep your fingers for a long time my friend.

less intimidating Brotherhood.

Sorry man... The music killed me... Couldn't watch your video

Do you know where I can find jazz music without copyright?

@infeelfurniture

Жыл бұрын

In the description there is the name of the song, it is from the phonetics of KZread

Скол на корпусе чем шпатлевал?