Walnut Side Table with Sapwood Inlay
Тәжірибелік нұсқаулар және стиль
This video is sponsored by Harry's
www.harrys.com/michaelalm to get your trial set for only $3
This week I'm building this walnut bedside table with sapwood inlay. Sapwood is the outer few layers of a tree, and is usually a lot lighter than the heartwood which is the inner part of the tree. This side table is made entirely out of walnut, but I used the contrast of the inner and outer tree rings to create inlay that highlights the handles of the drawers. If you have any questions feel free to ask in the comments below.
Affiliate links for tools used in video
Mirka Deros Sander amzn.to/393sLoz
Mirka Dust-Free Sanding System amzn.to/3j2mo9T
ISOtunes Pro amzn.to/2I1Ov7x
Rockler Sure Foot Clamps amzn.to/3fskPj8
Rockler Bandy Clamps amzn.to/2CElUWq
Rockler Tool Pouch amzn.to/2AZECaC
Rockler Pro Lift Router Lift amzn.to/3fy85HU
Kutzall Rasps amzn.to/3fymmnI
Festool Domino amzn.to/3eudJcv
Festool Extractor amzn.to/3h0Pq7S
Festool Track Saw amzn.to/3fA85qE
Kreg Pocket Hole Jig amzn.to/38Z8L6r
Blum Undermounted Drawer Slides amzn.to/30cx5Ov
Handi Shims amzn.to/32xHJjA
1-2-3 Blocks amzn.to/2CHyu7l
Stanley Tape Measure amzn.to/3cghbaN
Magid Safety Glasses amzn.to/2wYO6AR
Saw Stop amzn.to/2Pxz2jU
Freud Combination Blade amzn.to/2TpuZHn
Glübot amzn.to/2TmH14t
Irwin Quick Grips amzn.to/3cfaqpP
Jet Bandsaw amzn.to/2TavHts
Pullsaw amzn.to/2I69ztC
Arm-R-Seal amzn.to/2Thq23i
Milwaukee M12 Drills amzn.to/2VtDBQ4
Check out my Amazon store where you can find all the tools I use in my shop, and help support my channel
www.amazon.com/shop/michaelalm
You can also support the channel by joining the Patreon!
/ almfab
Patreon members get exclusive Sketchup files of my projects along with a bunch of other rewards.
Shaun Boyd How to Install Blum Undermount Drawer Slides • How to Install Blum So...
David Piccuto/ Make Something Frame Sled • Video
Alm Fab T-Shirt: teespring.com/alm-fab-logo-t
almfab.com
Instagram @almfab bit.ly/alminsta
Pinterest /almfab / almfab
Facebook /almfab / almfab
Music: www.epidemicsound.com/
Пікірлер: 403
I’m just sitting here at the end of the video, just shaking my head in disbelief. This piece is absolutely stunning. Beautiful work!
@MichaelAlm
2 жыл бұрын
Thank you so much 😊
The inlay design on this project is a killer detail that really makes this stand out. It's given me inspiration for my work on my own bedroom, so thanks for that. Working on a horribly small budget but fortunately near where I live is a spot people use to dump furniture illegally. It's a great source of free fine quality wood as well as basic construction pieces.
Woof woof Winston….. your human has great skills 👌🦴🎾
I have been frustrated at simple mistakes i make daily in my startup. And seeing videos for techniques and such, perfect videos without mistakes , tend to mislead. Please don’t edit out those mistakes! You made my day and gave me reassurance! Subscribed! Thank you!!!
It turned out fantastic! Love how the sapwood banding wraps all around the thing.
I really loved the way this one came out. Might be my favorite non plywood pattern video.
Bravo to Ashley! She heard your distress, made sure you were ok and didn't need help, and then moved the camera to capture the moment.
Wow, this has to be one of my favorite builds of 2020 for sure! So gorgeous!
I absolutely love the modern look and feel of this.
Man that is one beautiful piece of cabinetry! ❤
Killer job Michael! We absolutely LOVE all your project videos!!
Beautiful piece. The inlay is a really nice touch. When I make mistakes like that, there is a lot more choice language involved. 🤬 Very glad you were able to save it. Thanks for sharing!
I saw the glue going on the wrong side and actually said "No!" out loud. We've all been there. At least it was early and you were able to watch it off! Beautiful piece!! Nice work!
Wow. This and the Murphy bed. Just gorgeous!
Such a beautiful piece!! The inlay is an amazing detail. Good work!
Couldn’t help but notice that nice Mercedes on the drive... my dream car. Awesome workmanship by the way! I love the fact the sides of the drawers are clean and without visible sliders.
Lovely job. Good to see someone not editing out his mistakes 🙂
Truly an incredibly beautiful piece Michael! Oh man, my heart sank when you realized you put the glue on the wrong side! Glad it worked out!
@MichaelAlm
4 жыл бұрын
Thanks Ethan!!
That quiet close drawer system is just 👌
Damn dude, I love your design work so much. Also, I feel your pain with that mistake. I made a HUGE 4’x8’ sheet of hexagon pattern plywood for a headboard (got the idea for you of course). At the very end of the build, I drilling holes for French cleats and the stop collar on my drill bit slips and I drill through the face of it. I screamed so loud that my wife heard me from inside the house 😂. I fixed it by cutting a strip of plywood, chucking it up in my drill and sanding it into a dowel to plug the hole. Thankfully matched pretty well. I’ll have have to shoot you some pics on Instagram seeing as you’re the inspiration for the build. Thanks again for making all this great content!
Really diggin’ this piece Michael!
What a soulful design and build. The glue was like, "nnnooooo!". Routinely a piece with such a insightful design and unique qualities aren't as thickset, it certainly speaks throughout to the quality and thought invested. Solid work.
You're fortunate to have a sink like that in your shop. Very nice project-the sapwood looks great!
The way you reacted when you realized your mistake , so ,so funny, and reminded me of a dear german friend . Shout out from romania .
Nice save on the glue on the wrong side, I have done that on my end grain cutting boards a couple of times, had the same reaction as you did. Love your builds
That’s a beautiful piece of art Men Your face reaction when u put glue on the wrong side. I was like OMG he’s human after all 💪 great job men .
Great save! Saying louder and louder "wrong side!!" It looks awesome and the inlays really does make it pop!! First time watcher and subbed! Your video and commentary is nice and relaxed! No over dramatisation BS! Really enjoyed it! Thanks!
Great design brother. Love it. And don’t worry about the glue mistake we all have been there.
That inlay looks awesome!
I love how you showed your glue mistake. Everyone has done that at least once. After rinsing it I would have probably used a card scraper to get every last bit of film off and then dried it. But that's good that you noticed it right away. Beautiful work!
Love the inlay. I like that you can still say it's an "all walnut" cabinet. Even the lighter wood is walnut!
this came out so great! love that inlay!!
It's simple and beautiful. Beauty is in simplicity
Beautiful build. Love the sapwood
Love the design. Great work!
Very nice build Micheal! 👍🏻 Thanks for sharing!
Beautiful design and good choice of wood. Bravo !
Nice piece. Great use of sapwood. Well done.
Before you've said the word Mistake, I spotted and tried to warn you but you didn't hear! Glad you could save it!
@MichaelAlm
4 жыл бұрын
Hahaha 🤦🏼♂️
@ocelliwoodworks7272
4 жыл бұрын
I did the same thing. I was like "um, that's not the side to put glue on", and then you kept adding more and more glue. Nice save, lucky you had the sink in the shop.
@Z-add
4 жыл бұрын
I'm glad he didn't listen. Now i know that i have to wet both sides of the board so it won't bow.
@AnthonyBowman
4 жыл бұрын
My teeth and jaws are still hurting from clenching so hard while he was doing that and then rinsing the glue off! Yikes!
@VikashVikaskumar-ze4hy
4 жыл бұрын
S
Unique idea! Nice job!
Beautiful work, as always. Man, I gasped when you had the glue mishap. Glad to know I'm not alone making those kind of mistakes. :)
Beautiful work....running that dado with just the miter edge against the rip fence scared the crap out of me!
20.46 Apart from the gaping hole between the drawer front and the carcass, brilliant job. Love the design.
@daveklein2826
2 жыл бұрын
Troll
Hello my friend. It's a great project. Very beautiful design. The side table with walnut inlay is very stylish and decorative. You did a good job. I watched with curiosity. Congratulations. See you. Great greetings. 👍💖
Gorgeous design and excellent craftwork.
Really fantastic work. Walnut is the GOAT.
Great job on that cabinet!
Great video Michael! And a great looking bed side table! The mistake with the glue, yes I had it once, but with a toy, so that's not that hard as on furniture! I'm happy that you were able to save it!
A true craftsman can fix all the mistakes, way to be awesome. I really appreciate that you didn't cut that part.👍
That’s a beautiful piece.
Wow! That. Is. Gorgeous!!!
Wow!!! That is incredible!!!
Michael, I’m really glad to hear you’re walnut doesn’t smoke anymore. So much better for his health. I’ll kidding aside great project brother
Buitiful piece of work! The real craftsman is who can to correct the mistake in time.
16:40 THANK YOU SO MUCH FOR THIS !!!
Beautiful Work!
Looks good. The sapwood inlay is a nice feature!
Wow, great video and project. Amazing that you thought that quickly to fix the glue “situation”.
@MichaelAlm
4 жыл бұрын
Thanks! Yeah just barely saved it 😅
When I saw you run the inlay pieces halfway through and turn them over I pictured in my mind me trying the that and it didn't go nearly as smooth I could see the pieces shooting though the shop maybe one sticking out of my leg you know. great work man love the inlay
It's Beautiful Michael!
beautiful design!
Wooooww, digga!!! Thats the most beautiful piece of furniture i've seen on YT for a long time! So nice..so inspiring! Thank u so much for this.. And the moment when u put the first glue drop on..whaaaaa.. Very nice Job! Thanks..
One word for you as always "you are a artist".
Beautiful work!
Very smart looking cabinet. Well Done.
I was watching and I was thinking hmmm I think he put glue on the face. but then nah he knows what he is doing. oh well, at least I am not the only one who makes mistakes. I love the handles. :) amazing work!
Nice built Michael! Thanks for sharing the video with us!💖👍👌😎JP
Beautiful cabinet. Thanks for sharing your process, including that super stressful glue fiasco. 😮😅
Outstanding looking build!
i love the honesty in your videos :)
What a beautiful job ! Plus i just bought your blades you advertise ! Thank you
BEAUTIFUL!!! Nice work ❤️❤️❤️
Stunning - Elegant Stylish Sophisticated
Congratulations for this piece of art you built :D
Exceptional!! Very beautiful.
By far my worst skill is carpentry so I really enjoy learning. I just subscribed to your channel, literally only because you were honest and showed me you are human. We all make mistakes, but it gives us a chance to learn and become better. Great build. Looks awesome. Maybe router out a spot for a wireless charger?
man i think this guy is the most innovative wood worker on yt, amazing work every video
Love the innovative design
Hey from Seattle (PNW, WHAAAT??)!! Loved this. Absolutely gorgeous!! As soon as I saw the mistake, before you said anything, I was like, “WRONG SIDE!! NOOOOOO!!!” Glad it all worked out!!
That is genuinely a beautiful piece
Awesome work Michael! 😍👌🏻👍🏻👊🏻
Nice work!
Very very very nice job!👍🏻👍🏻👍🏻
OMG you killed me with the washing of the board 😆 Great save!
Nice recovery on the glue mistake. Mistakes are part of the craft. :) I started a playlist of mine.
I love the design man
Stunning work dude. Omg! My heart did a somersault with that glue mishap! Thank goodness, all's well that ends well. Give yourself a pat on the back for this project.
@MichaelAlm
4 жыл бұрын
Hahaha! Thanks Rueben 😅
bom ver que não e só agente que erra ... Parabéns pelo trabalho
Good recovery.
Very badass. Nice work, sir! Cheers
Nice milling idea
Gran trabajo, se nota la calidad 🙌🏻
Excellent job!
It's beautiful!
I wish I had gotten into woodworking as a kid or a teenager
Nice recovery and great project 👍
Beautifully done. Glue in the wrong spot happens to everyone. Nice save.
Good job !
Beautiful
Holy cannoli! That is beautiful!