ABSOLUTELY BAD ASS

Clever little stand Dan 👍🏼 I like the addition of the drawers personally

@CafeRacerGarage

2 жыл бұрын

Thank you so much mate

Love the addition of the draws, great work Dan

@CafeRacerGarage

2 жыл бұрын

Thank you so much mate, was a fun build :)

I'm in the planning stage for my bike table, this has given me some great ideas, thanks Dan!

@CafeRacerGarage

2 жыл бұрын

You’re welcome my friend 😀

Very cool, and looks relatively easy to build. If I had the room in my garage I would definitely be building one of these.

@CafeRacerGarage

2 жыл бұрын

You could make one that folds down flat, just be sure to build it strong.

Perfect timing mate. I've been building one like this on paper for a while. Your vid helps a lot!

@CafeRacerGarage

2 жыл бұрын

That is amazing. I hope it all works out, planing definitely is a good place to start

You have some mad skills, Dan! Hope all is well there. 🏍👍🏍

That looks sick Dan. Perfect for my CG. Would you happen to have any plans or a cad or something you could share?

@CafeRacerGarage

2 жыл бұрын

Unfortunately I didn’t do any drawings of it I just built as I went which is how I do most things

Great job 💪🤙👍 I have to maneuver two bikes into a little garden tool shed 😂

Love this channel, I'm gonna be doing my 1st project next year on a 1982 motoguzzi v50 mk3, and will be using a few of your videos for reference and guidance 😀. Great channel and great projects. Thanks for sharing your skills

Hi, great Video. Thank you for sharing this!! Can you please tell the Height of the Table ? How did you find the pivot point?

Fantastic ... Thanks for that!!

Great timing! I was about to make a simple one and use my ramp but this one is so much cooler thanks so much!!

@CafeRacerGarage

2 жыл бұрын

Perfect, definitely recommend the tilt-top :)

@beamin03

2 жыл бұрын

@@CafeRacerGarage yes sir! That and I might add rubber or something to make it non slip I'm not planning on adding casters,the storage space is definitely a must!

Excellent job Dan, looks great mate, and now I have to go and buy two more tools LOL. Ride safe. Cheers

@CafeRacerGarage

2 жыл бұрын

Thank you so much mate, he definitely won’t regret buying these tools ;)

Well done Dan! And some very handy tips. You're a good man!

@CafeRacerGarage

2 жыл бұрын

Thank you so much mate, I grew up around woodworking from a very young age so stuff like this is super fun for me. I find working with timber to be very therapeutic and I might end up doing a bit more of it on the channel.

@johnDukemaster

2 жыл бұрын

@@CafeRacerGarage Good idea 👍

Pretty cool bench sir. Cheers 4 sharing.

@CafeRacerGarage

2 жыл бұрын

Thank you mate :)

Fantastic!

perfect, I'm about to start a K100 build so this will be good to keep me on task while I get some more funds together

Nice idea.

Looks great big fella. That top might be abit of a handful with wet tyres but hahah. The storage is awesome!

@CafeRacerGarage

2 жыл бұрын

Yes you are not wrong. It’s definitely not the perfect solution but it is a solution. 😮😆

@mattfranco8715

2 жыл бұрын

@@CafeRacerGarage my solutions rarely are perfect 😂. 🤙🏼🤙🏼

Nice work mate, initially when you said you were using pine I had my doubts, but it turned out great. Im really looking forward to the virago build as I am in the progress of my own '81 750 build.

@CafeRacerGarage

2 жыл бұрын

Thank you mate 😊

Nice build. I would be tempted to put 2 d clips on the side so you can use some ratchet straps to hold the bike as well when moving it.

@CafeRacerGarage

2 жыл бұрын

Thanks mate and yeah you do have a great point there, I do have a few modifications to do it but at the moment I’m using a rear wheel bike stand so that’s nice and secure as… Back wheel up

Essa ficou braba meu parceiro

Nice moto rack. We're about to build a new work bench. If we didn't buy locking swivel casters, we would probably take you idea.

@CafeRacerGarage

2 жыл бұрын

If I was to build it again I would definitely use steel for all the moving parts just for long Jevity.

Very nice! Thanks for sharing. Just one question, you trust those 2 bolts to carry the weight of a motorcycle while hinging? After prolonged use, are you not afraid one will snap?

@CafeRacerGarage

2 жыл бұрын

Thank you so much mate, Those bolts are 13mm or 1/2 inch I would be more worried about the integrity of the timber then I would about the bolts.

Looks 👍

Nice!!

Do you have a set of plans for this?

Rad dude 🤙

AMAZING WORK! I need to get me one of these eventually xD

@CafeRacerGarage

2 жыл бұрын

The tilt top is the way to go, 500mm off the ground is good if you are tall, get an old office chair to go with it for the lower stuff :)

@MotoMango

2 жыл бұрын

@@CafeRacerGarage Yeah, I use a little stool for working down lower :)

Thanks for the inspiration Dan. Can you tell me are you happy with the wheel chock, and if so, where did you get it? Thanks in advance.

@CafeRacerGarage

6 ай бұрын

No worries I got it from an automotive place called Supercheap

@wood2259

6 ай бұрын

I think I've heard of them 😂😂😂. Thanks mate.

Hi handsome. What a functional motorcycle lift. I love it.Would you consider selling it,or building one for sale? Thanks

@CafeRacerGarage

Жыл бұрын

I gave this away late last year

Couldn't help but notice you are in Queensland, I have a XJ600 SECA II UGLY, I have had some work done and have plenty of parts (no engine work needed), I was going to do the work myself, but time is an issue, can you recommend someone to complete my project, might make a good series, ugly duckling to a beautiful swan

Me saludas??

Do you have the blueprints?

Awesome. I am just looking to design my own bike table and i really like the idea of this design. I might go a bit more simple as I don't need the wheels and it can stay in one place. How hard is the drop back down with the bike on it? I am a bit worried about the weight.

@CafeRacerGarage

Жыл бұрын

Yeah you have to get a bit of a run up to get the bike on, but apart from that, it works perfectly It’s actually a World War II design

@StokedBuilds

Жыл бұрын

@@CafeRacerGarage Awesome. One last question..I'd like to be able to get a bike in from either end as I have a long garage and bikes can come in either end of that. Is your pivot point right in the center so it could swing both ways? Or should it be offset from the center?

I'd like the front wheel chock on a ratcheting rail lock it at the bottom of the ramp and ratchet up.

@madeleyinc

6 күн бұрын

??

Nice video, buddy. How’s Queensland, hope everything is getting better with these floods

@CafeRacerGarage

2 жыл бұрын

Thank you mate, yes I’m ok where I am but some people got hit hard

I like the sneak peak at 8:44. :) Edit: spelling

@CafeRacerGarage

2 жыл бұрын

Haha SHHHH 🤫

And why buy one when you can make a real sick looking fit for purpose one . As soon as you said about the screws I thought needs bolts .. great video as always Dan thanks

@CafeRacerGarage

2 жыл бұрын

Thank you Gary, yes it definitely needed bolts, if I was to build another one I would definitely make more steel parts especially the wheel mechanisms.

Can I get the measurements of the wood used?

@CafeRacerGarage

Жыл бұрын

I would love to but I gave it away on my Instagram you can see the guy I gave it to, he might be able to give you the measurements

Nice… so I just ordered 2 sizes of those aligning punches 🤣🤣👍🏼. Totally your fault 😬

@CafeRacerGarage

2 жыл бұрын

That's awesome, you wont regret it :)

Sweet now less carpentry more bike building daniel 😛

@CafeRacerGarage

2 жыл бұрын

Haha 😂

Good video but not great…. A lot of time on the build but …WAY..too little time on 1) getting the bike up and in place and releasing it from your hands….and…. 2) reversing the process / getting the bike back down…

@SOLDbyYOU

10 ай бұрын

And…. Not enough time spent showing the completed wheel mechanism.

@madeleyinc

6 күн бұрын

Because the basics are easily figured out by the individual, with half a brain i will admit.