folks, this is a Brownian generator. learn more about Yule Brown's inventions and remember that this man led the way.

PLEASE put flashback arrestors on this so it isn't a bomb

@bob7500

Жыл бұрын

He would just need to place another jar where all materials collect, using the same method here, then out to his last jar for collection as he has done. Spark arrestor complete. Safety 1st!

@theseoldhands532

Жыл бұрын

That’s what the water is for 😂

@ManneMannable

Жыл бұрын

Booooooring

@lpm287

10 ай бұрын

100%true I hate seeing all these videos with none so join doe comes along builds one and hurts him self because they left that part out.. good call even have a bubbler back up

@edpurwanto2721

10 ай бұрын

​@@bob7500❤😮 BB

Personally I would add a few flash arrestors or one way valves in the hoses to protect the generator from exploding if a flame goes backwards through them.

@-COBRA

Жыл бұрын

Yeah, with this setup it's more like "Making a Simple Hydrogen Generator Bomb".

@Fire90475

Жыл бұрын

It is a little bit safer by feeding the gas through water, as the water will most likely stop the flame from going backwards, if the hose is far enough from the top.

@yeetmcmeat

Жыл бұрын

@@Fire90475 yeah, but having to run it through water to use it is annoying. The best use for an HHO gen is a torch imo and water wont cut it there.

@Fire90475

Жыл бұрын

@@yeetmcmeat true

@paulfrost8952

Жыл бұрын

Good point. Do you have any ideas on how to make a flash back arrest?

Love this!! Pete McMannus did this first thing of my first chemistry lesson and I’ve been hooked ever since!!

Super projekt, bardzo prosty a za razem bardzo wydajny...

@maxwellAnderson-art

8 ай бұрын

This shows you don't understand physics or science or logic

@SJ72_Argo

8 ай бұрын

te nauki ścisłe na chuj się nadają...@@maxwellAnderson-art

For anyone wondering, it is safer to use drain cleaner than regular salt, because using salt (NaCl) will split into toxic chlorine gas during the electrolysis.

@sunsetindigochild3798

Жыл бұрын

Can you not use distilled water to take the chlorine out. ? As well as drain cleaning salt

@Fire90475

Жыл бұрын

@@sunsetindigochild3798 it was about adding the chlorine in form of kitchen salt, if you don't do that, the chlorine concentration will be pretty low nonetheless.

@alvincrosby1492

Жыл бұрын

koh potassium hydroxide at 15% by weight in pure distilled water say 600grms to one later water

@alvincrosby1492

Жыл бұрын

use 316 stainless rod and hardware, attach unit to vacuum side,3% is all u need .

@jimk8520

Жыл бұрын

Speaking of toxic, you’ll need to deoxidize the chromium in solution so you’re not dumping out hazardous waste when done.

Using SS threaded rod and with alternating stack of large and small SS washers increased the surface area and reduced the number of chambers required for optimal output. Using lye as an electrolyte gave excellent results. Nicely done btw.

@user-fr6jp2bh1j

3 ай бұрын

whats is lye as an electrolyte?

@raymondelder5004

2 ай бұрын

How did the sodium hydroxide perform versus the potassium ?

@spaides5121

Ай бұрын

it also puts chromium 6 in the water tho

@jankauza8694

8 күн бұрын

@@spaides5121 it is in the water

Excellent workmanship and an interesting project.

a great application of chemistry, top notch creativity, thank you for sharing it

Very informative video as always, I’m always very happy when I see you uploaded a new video! I actually rebuild a few of your projects and they turned out very well!

@maciejnowakprojects

Жыл бұрын

Thanks!

@tomburg2

Жыл бұрын

It is not informative video, it is untruthful video. It is not hydrogen, it is brown's gas. Brown's gas is dangerous, it explodes very loudly from very small spark. Hydrogen instead burns mildly.

@Felix_Oyeniyi

Жыл бұрын

Please I need some of the materials so I can do this and use it to light a bulb

@nirvaansinghtheartist

Жыл бұрын

how long will that mixture last and how much hydrogen will you get out from those four bottles

@tomburg2

Жыл бұрын

@@nirvaansinghtheartist It does not produce hydrogen, it produces dangerous and explosive brown's gas.

Excellent editing of the video to minimize the duplication of activities.

@maciejnowakprojects

Жыл бұрын

Thanks!

You can use cigarette filter as flashback arrester because HHO can ignite without a spark inside the tube. This makes a nice mini torch 🔥

From Pakistan with love Work on next step good and safe way to use . Also define safety measures for a common man

. Great design! It is identical to another process. It's called electroplating. This is when DC current is used to deposit a thin metal coating onto a dissimilar metal surface. This is not necessarily a bad thing but, over time, you will notice that the bolts that are connected to the negative terminal of your DC power source will begin to thin out and eventually disintegrate. This is because electricity, AKA moving electrons, have a negative charge and emanate from the negative terminal of any DC source, battery or mains powered, and migrate towards the positive terminal carrying metal ions from those negative going bolts with them and depositing said metal ions onto the positive going bolts. Even stainless steel is not immune to physics. It's just a little more resistant to the caustic effects of the potassium hydroxide. This trick won't restore damaged threads onto your bolts but one way to extend the life of your electrodes is to keep track of the running time of your unit. Then, at equal intervals, hours, days, weeks whatever, reverse the polarity of your power source. Being that your unit premixes the hydrogen and oxygen gases internally, you will not notice any change in it's function. If it isolated the two gases from each other, then the gas emanating from the vessels would also be reversed. Another way to extend electrode life. Potassium hydroxide is caustic. The alkali equivalent to the corrosiveness of acid. If you remove the electrodes from the solution when not in use and rinse them in plain water, this will stop any chemical reactions. If you buy 4 more plastic jars, you can use the extra lids to keep your electrolyte solution from evaporating. On a different note, being that the 2 gases are premixed within the HHO unit, itself, they are at the perfect fuel / air ratio for a very energetic explosion should a spark or flame source find it's way to the end of an open hose connected directly to the HHO generator. If this happens, it will travel, literally, in a flash like blasting "det cord" right back to those 4 caustic fluid filled grenades just bubbling away at making their own explosive. They will then be showering their maker with a nice, hot, caustic, blinding bath. In essence, literally biting the hands, (and face), that feeds them. As a service to your viewers, I would advise them to build a flash arrester for your unit AND USE IT!!! A simple flash arrestor can be built out of a plastic bottle. Gatorade or Powerade for example as they are very sturdy, 2 pieces of hose and some water. 1) Drill 2 holes in the top of the bottle cap the size of the hoses. 2) Pull a LONG HOSE through the cap to reach 3/4 of the way to the bottom of the bottle. 3) Pull a SHORT HOSE through the cap to reach only 1 to 2 inches inside. 4)Use silicone caulk to seal the hoses to the cap and let set to cure. 5) Fill the bottle 3/4 full of water. DO NOT cover the end of the SHORT HOSE with water inside the bottle. 6) Connect the LONG HOSE to the HHO vessel. 7) Use the SHORT HOSE as the gas source. As the HHO generator produces gas, it will travel through the LONG HOSE and bubble up through the water exiting the bottle through the SHORT HOSE. If a spark finds it's way to the end of the SHORT HOSE, the gas will only burn for whatever the length of this hose, into the flash arrestor and stop at the water's surface. You'll want to use a plastic bottle for the arrestor to allow for temporary expansion during an accidental detonation. A short "POP" in a plastic bottle may make it jump but the same "POP" in a glass bottle will make a bloody mess.

Thats very good simple HHO generator 👍👍

Thank you for your simple instruction

Do u need to ever change the water or add more drain cleaner?

this is creating a mix of hydrogen and oxygen. (I believe it is called browns gas but correct me if I am wrong!) you need to collect the gas from the anodes and the cathodes separately using a divider to be able to get pure hydrogen and pure oxygen.

if you place a partial divider (from the lid down to the liquid level) between the anode and cathode and use two hoses from each jar, you will produce separate the oxygen and hydrogen

@nevernether3368

Жыл бұрын

Could also add a water inlet to make filling easier.

@philipkudrna5643

Жыл бұрын

That‘s what I thought as well! Filling valves and separate gas collectors would have been the next level!

@amidaleahmad1324

Жыл бұрын

By sepration of oxigen and hydrogen then explosion will not happen dangersly .😍👌

@juaffle

Жыл бұрын

Couldn't you just separate the anode and cathode into different jars and connect them via a middle wire ?

@nevernether3368

Жыл бұрын

@@juaffle works way better with a connected body of water.

How much more/less efficient are the bolts over plants? Comparing gas generation per volt or amps

Excellent works, very good.

Beautiful set up, looks clean

@vincecox8376

Жыл бұрын

When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance

@chadrowlett893

Жыл бұрын

My thought is to treat it like a capacitor and hit it with the correct frequency....and yes (what you said)

@chadrowlett893

Жыл бұрын

....and (said frequency) needs to be a sharp pulse for a superior catastrophic dielectric failure of the molecule to highly increased effects

@lebergerdesphotons4565

3 ай бұрын

@@vincecox8376 talk is cheap. I hope you'll go beyond that and share.

Cool project. good video!

In fact, I give you 200% marks. Bravo. I'm watching live from Ghana, West Africa. I've been really taught well

@immanueltakyi-appiah6427

4 ай бұрын

My Ghanaian brother I have done it ooh

@supersjaak123

Ай бұрын

Now make Ghana a hydrogen energy prosperous country!

Macieju jaka jest wydajność takiego generatora HHO?

ciekawe co dzialoby sie gdyby do stalowego cylindra wpompowac sam wodor bez tlenu, wlac troche wody dodac trocin uszczelnic i podgrzewac. mozliwe ze drewno, wodor i woda zaczelyby reagowac i moze cos w rodzaju palnej cieczy mogloby powstac. to moglby byc ciekawy odcinek. Pozdrawiam!

That's very interesting, the next thing that I would like to know is how to separate the hydrogen from the oxygen.

Nice job man

Maciej.. that is so cool!! Polish Power all the way!

Why were we taught things too complex to teach practical mechanics using science? Education had never led us to think, only memorize. Thank you.

Unique videos as always 👍

Dzień dobry. Jakie napięcie jest podłączone do tej wytwornicy i jak często trzeba wymieniać wodę i elektrody ? :)

Thanks Bro. Now i know how to make a Motor out of it

Hello Is it possible to measure how much gas output from your reactor is?

we can use bolts to make hydrogen generator, that's awesome

Świetny pomysł. Dużo mniej skomplikowane i tańsze niż tradycyjne rozwiązanie z płytek

I love your system. It is very simple and works great. Thanks for the video!!!

LOVE YOU PEOPLE KEEP UP THE GREAT WORK !!!

Great work

Pretty impressive work, Maciej! Fantastic indeed! 😃 Stay safe there with your family! 🖖😊

@tomburg2

Жыл бұрын

What impressive? It is not hydrogen generator as is written in title, it is brown's gas generator. Brown's gas is dangerous, it explodes very loudly from very small spark. Hydrogen instead burns mildly.

The fact that you know how to do this in your backyard is amazing. Thanks for sharing

How is the efficiency compared to dry cell?

I have a question about the wiring, You just need to hook cables on the far end plates? how do the rest get the electricity? As you can see I have no idea about electrical circuits. Thanks.

Very Nice . Now you need a storage system

How much power does that draw for the Hydrogen you get? I'm thinking of designing a unit to use 5-10 kilowatt input and see how much H2 I can get per day

Nice and simple 👏🏽

Great Video // This in series wiring config would be more voltage required for optimum output. Alt parallel connection would require less voltage and pull more current(Amps) which might be better because you can maintain 12V and add more batteries in parallel adding Ah. Since the current is the flow and not voltage. Also in series the system has a higher resistance from container to container. IE if used in automotive or RV application. Also I would make the tubes about 2 inches put the T's center nipple in 2 3 and 4 and run slightly bigger tubes from 1 to 2 to 3 to 4 the out down the center. plus add a fifth jar with only water for flash back protection. Just some thoughts. Also Agree with @Mark Durbin

@ronmartin7253

Жыл бұрын

Good points. But this design ignores *surface area and spacing* so completely thats its a disservice... this is strangely like a Joe cell which is for something else. I hope ppl get Wiseman's info before making something similar to this that will have too low a cap on its gas output to energy in ability

@csbeaver

Жыл бұрын

@@ronmartin7253 agree

@andybilakshow260

Жыл бұрын

Also talking 'series', When using multiple cells, cell 1 hh/O output should be piped to the bottom of cell 2 through a fine screen to thin the electrolite (instead of multiple BIG bubbles). I also think there should be a separator. Do this through all cells in the system. Perhaps the last cell in the system will draw the least current by having higher numbers of free h & O bubbles.

@tygrisek38

Жыл бұрын

Good video please what kind of plastic is it?

What metal are the threaded studs made of? Doesn't get corroded? What about distilled water?

How would you utilize this unit or is it just for show ? How would you put spark arresters in line ? Thanks.

I used old time tooth cleaning powder for electrolyte , it builds up on the electrodes to protect them . Mine was made with bike spokes & rubber bands in plastic pipe . It would generate by just being in the sun .

@neveralonewithchrist6016

Жыл бұрын

Very cool

Fantastic and simply made. Now how will we use the gas? Thank you very much!

Going to make one for my truck thanks.

Well done girl. Great job. 🤠🍀

That's good for a basic demo however a single coil electrolyzer only produces Orthogydrogen which is volatile and burns hot causing embrittlement in aluminum block engines (if you're thinking of supplementing your fuel efficiency). You need to build a reactor that has dual coils at right angles to produce both Orthohydrogen and Parahydrogen (burns slower and steadier, and balances the combustion behavior of the Orthohydrogen in the electrolyzer/reactor). Otherwise you have to treat your aluminum block engine with a heat treatment like Ceramizer so you don't pit your cylinder walls or burn through your head gasket. Then the issue of what electrolyte to use.... if you use potassium hydroxide (lye), then you create toxic sludge that has to be flushed from the reactor every so often. I tried, but creating an organic electrolyte costs big $$, more than I had in my R&D budget.... still... it's a fun experiment, and that guy who created the HHO welder version did an impressive job. Good Stuff! 😎👍

@originalscottfree

Жыл бұрын

Aluminum block engines must have iron sleeves, maybe you are referring to aluminum heads? I think HHO maybe a viable solution for 2-stroke or even rotary engines though.. Haven't given it much thought. ¯\_(ツ)_/¯

@Juhsga

Жыл бұрын

Good information and I'll have to read more about it. Hydrogen embrittlement makes sense, didn't know about Orthohydrogen and Parahydrogen, only HHO. Very interesting!!!

@vincecox8376

Жыл бұрын

When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance

@1gramps4julian

Жыл бұрын

@@vincecox8376 you still have to generate a BALANCED blend of Orthohydrogen and Parahydrogen gasses.. otherwise you end up with engine embrittlement (on aluminum heads & gaskets... then you still have to deal with creating a biodegradable organic electrolyte... NO MATTER HOW MUCH VOLUME YOU GENERATE...

@anioaktree8911

Жыл бұрын

Look up pistol shrimp... Yes shrimp. It is one of the most fascinating creatures on this planet. Also do some research on The different types of helium isotopes (how they behave in respect to hydrogen and The changes in properties and structure under different environmental influences such as temperature, light, and pressure, etc...), magnetic fields, and the semiconductors gallandium and Indium tin oxide (paying close attention to their electrical qualities when in a gas form) also when doing this don't limit yourself to only collecting energy from one source. Think hybrid in which electrical energy is taken from multiple, cooperative and agreeing materials. Perhaps you can rid yourself of decay waste through some kind of evaporation process in which materials can be re-harvested and reintroduced to be used a second time. Allowing less waste and a higher efficiency?... We talk about collecting electrical energy from nature but I don't think anybody ever stops and looks at how nature does it, because she does it very well, with minimal waste. She shows us how through some of her magnificent creatures. Maybe look into using hi/lo crossovers to introduce a sound wave to the hydrogen? I'm willing to bet there is a frequency you could produce that will create a vibration which might move the hydrogen particles fast enough to create a vacuum I mean who doesn't like a system in their car and how awesome would it be if your music powered your car? Double whammy passing the sound wave through the water would muffle it so we wouldn't need those stupid little trunk dampers! just use your hydro-generator. Okay so now I'm getting into jokes but I really want to ask somebody "how many miles per song will your car do?" 🤣 Do you think in this hypothetical situation that the genre of music you listen to would affect your fuel efficiency and mileage? Now keep that mental picture and makes it with people's already really shitty driving and go 😂😂 Anyway evaporation process is probably your friend in all this too because in reality the fuel that runs your car is only flammable in a gaseous state. All right anyway I've said too much and you probably stopped reading a long time ago as my boyfriend says with his caring sidebar 🤣🤪 You probably didn't have as much fun reading this as I had writing it. But if you want to talk about it some more just go on a forum and ask all the physics and quantum mechanics majors. You might have to remind them to speak more clearly and slowly if you're not into the whole quantum physics jargon.

Excellent, how large would one be to power a generator, or can this be stored for long periods of time, from an apparatus the size you have shown.? Cheers.

@AdrianGtz

Жыл бұрын

I believe this setup can power a generator

Best video thanks for sharing 🌸🌸

In indonesia we put the hose to motorcycle/car air filter when the motorcycle turn on it produce gas to air filter and can make the fuel consumtion less and more economical. *before you do it please use pure distillation water ,it will make the remaining calsium dust from the evaporation of water that is not pure distilled water.

Good build i enjoyed this video. Just a though, but May be consider subjecting the electrolyte to external forces such as magnetism, or inside an electo magnetic field, ultra violet light, a vacume during opperation. There is a home scientist in Australia who is getting very interesting results with laser lights aimed directly into the electrolyte with out using toxic hydroxides. He is getting good returns too. Just a thought. Love your work.

@vincecox8376

Жыл бұрын

When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance

It is a perfect system and effecient good .i like it.

looks solid. have you ever tried welding steel or other metals with the output? would it make gas quickly enough to melt steel pieces together?

Nice video like your details 👌

Hi, I hope you are doing great. Thank you for your very easy to understand and very detailed DIY videos. I was wondering have you ever routed the hydrogen gas into an empty brand new propane tank and substituted the propane with hydrogen gas? I was wondering do you think that type of propane tank conversion project is possible and safe with your expertise in making DIY generators? I was wondering did you already take on that project? And if so, can you share the link to your video. In case you haven't tried it. Would you be willing to try it and make a video of the steps involved like you do? Thank you for your genuine contribution in educating people in this amazing area of DIY projects. Hope you prosper in your endeavors. Thanks, Kim

@ara8692

11 ай бұрын

dont do this with a hho or combined output generator. only attempt this with a split output generator where you have a pure hydrogen pipe also before you attempt this get yourself a vacumm pump and see if the tank is airproof. then fill it a little with hydrogen and set the hydrogen that is in the tank a fire. this should use up all the oxygen currently in the tank. now it should be ready to filll and store long time

@eugenethompson1903

11 ай бұрын

Sounds like this would torpedo that tank..lol

@ara8692

11 ай бұрын

@@eugenethompson1903 I have no idea what the terminology means PLS explain

Put a flashback arrestor if you don't want the whole thing to blow up.

Hi there just wonder what current to expect drawing from battery? I built a small one using caustic soda but my amps are 12 amps

Fantastic 🔥🔥🔥👍👍

Nice work

Seria magnifico que lo hagas en un automobil para que ya no use gasolina. Saludos

Bro what do you do with the nasty chemicals after the bolts corrode to death best to use nickel plated

You have two plus and two minus in the jars on the outside, the upper terminals do not have continuity, how did you do it?

@Jewelrymaker

Жыл бұрын

The water carries the voltage to each jar.

Prova a farlo mettendo le barre filettate il più vicino possibile aumenterà la produzione di idrogeno, Aggiungi anche un "bubbler" per ridurre il rischio di fuoriuscita della soluzione elettrolotica. Ottimo lavoro

but it is not only hydrogen but also mixture of hydrogen and oxygen. It would be better if you had used two separate tank to collect hydrogen and oxygen. Anyway the video is too good :)

Nice awesome concept

Do prądu podłączone są tylko dwa ostatnie sloiki?

cutting board plastic or would abs or pvc board work?

Are all the parts you used in stainless steel?

Does it make enough to run a small lawn mower or weed eater

How can this work when the 2 smaller plates are connected at each end and there in separate bottles. The 3 larger plates are not connected to anything.

Hi! Is that regular water, or distilled water? Could you explain to mw why pottasium hydroxide is better than sodium hydroxide? I'm asking because I just watched a short video comparing the the two on how fast it would corode an alluminum ball and the sodium hydroxide was much stronger, the aluminum in water sodium hydroxide solution turned black way faster.

Could you use this to power a small generator?

We make the Future ! Dom

Looks cool, but what can this be used for?

clean and tidy design.

Does the electrolyte leave a coating on the electrodes? I'm curious. Love this design

@Nickademus77

Жыл бұрын

It's corrosive. It'll eat the electrodes over time.

awesome thank you.

woow mas potente que la gasolina!!! y es barato!!, necesitamos ese polvito blanco!!! es facil y se puede adaptar en un motor gasolina 👍👍👍

Very cool project, you should increase the surface area of the electrodes with flat inox surfaces intersected with one another: This will make your generator a lot more powerful , increasing by an important factor the production of gas. Also a double chamber bubbler (filter) would be optimal for protection of the main chambers, check bubbler on yt and google. Maybe you already know these things but better be the annoying kid than not saying anything. Good luck from Italy 😛

What inverter and power wattage are you using? Can we see the draw and more detail so we can make the same thing?

What battery are you using to power the generator?

Nice 👍

What if we only wanted the oxygen? Can we give it a positive charge and leave out the negative? Or does it require both to do anything at all?

HHO go boom!

How do you get power to the to the 2 inner jars if you only gave power to the the 2 outer jars if you connected to the longer bars i could see but you didnt

@HEADCUTTER

22 күн бұрын

The jar probes are connected by those flat bars he put on during assembly, that saves running wires to every one of them. Jumper bars I think they're called?

Is there a thermal reaction during the electrohydrolysis of water? That is, do you need to take flasks made of heat-sensitive plastic or not? Thank you!

@richardjohnson8237

Жыл бұрын

Mate don't even bother it is pure fantasy.

Made something similar as yours but tryed to use home power electricity. It blew a fuse. Can I use home electricity or only battery electricity?

I have done this but if you try what TNT has done and try graphite foil resistance will go down and efficiency will go up. I plan on doing this method at a later time

Can it be used to subside the petrol or diesel fuels

What would you different to increase the HHO output gas volume Maciej ??? I like the idea with four jars side by side. Maybe more experiments with HHO would be nice.

@williamedwards6519

Жыл бұрын

I would 1st, glass jars don't yield under high temperature rather they are a great source of thermodynamic dispersion and worst case scenario knock the generator off the table of the ground and it'll break the jars. Second larger diameter hoses, smaller diameter thread stock and closer proximity to one another. Here we have current going to you high load capable basically fuel rods. Because those thick m24 rods can handle high amperage can sustain my average pull on it just because they're so thick, we're wasting energy. Smaller rods much closer proximity any little little gap between them creates high volume gas. 4. One Way gas check valves on the gas outline from the jars. 5. Adding a buck board, a PWM + polarity switching. Once you have stabilized increase production rate, you can have a heating problem. Next step adding a liquid cooler such as one from a computer system a water clean computer system, that has a pump and an external radiator morning fans.. replace when we check valves with a bubbler between the generator and the outline that but there's also going to have a a secondary type line the line facing in a pump out of it through the radiator and return the electrolyte back to the bubbler. And the bottom bubbler will feed a liquid inlet line into the four generators.

@victoryfirst2878

Жыл бұрын

@@williamedwards6519 Thank you Sir for giving me such a detailed answer to my questions. I am in the process of making me an HHO generator. Have been checking out information for the generator using different techniques and materials. Have you considered using graphite plates with I do believe urea solution based liquid can increase output a few more times output. Do not remember the exact number ?? Good day to you Sir also. vf

I understand that the current goes in one side and comes out the other but how does the current reach the other end when the metal strips are not connected

Witam niesamowity projekt, jakich użyłeś prętów gwintowanych ze stali nierdzewnych czy ocynkowanych

@ElektrokulturaCzyToDziala

Жыл бұрын

stal nierdzewna :)

First time I built one I failed to add a flash arrestor and ignited it within a foot of my face, all I heard after the explosion was a ringing for a solid minute.