I've never seen someone put so much time and effort into making molds. The results speak for themselves. WOW!!!

Looks amazing, would love to see a version with a clear acrylic holder instead of a wooden one to show off the cube even more

Multi-metal casting AND a cute pupper? Perfect video 10/10

THE SUSPENDA SLURRY IS BACK!! WOO!!

Another great video! You pay such close attention to detail, I love that. The end result is always such high quality. Seflishly, I would love to see you make a custom designed chess set out of metal. I've always thought chess sets have a beauty to them and you come up with such smart designs. I'd love to see what you can do!

@The_Dr_Fate

Жыл бұрын

chess battle advanced covered in metal

@madmachine5244

11 ай бұрын

You could also make the board out of three different metals. Aluminum for the base, the squares out of copper and brass, and finally for the dividing lines either aluminum or pewter. Also you could make a checker board as well.

@theillusorylife

11 ай бұрын

@@madmachine5244 That would be amazing! A lot of work though. Plus I'm not sure he's read the comments haha

@asht6415

8 ай бұрын

Jiih

@asht6415

8 ай бұрын

🎉❤😊😊😊😊

Your videos make the process look much faster than it actually is! What parts of the casting process are the most time-consuming? Admire your commitment and discipline to learning the craft, and also in documenting it so dummies like me can enjoy it! Thanks so much for the content!

@anzaca1

Жыл бұрын

Mold-making is easily the longest part.

this is beautiful! looks like a dream to fidget with, and i bet those pieces have a satisfying weigh to them.

Really enjoyed seeing you include the woodworking elements as well as the electric furnace. Great work!

As usual, another epic video that showcases your hard-won skills. The integration of the metalworking and woodworking components complemented one another nicely, and I can't remember the last time 15 minutes passed by so quickly!

Penny is such a good helper. ❤

Love multi metal builds! What an awesome puzzle!

Im so excited to see how this turns out!

This was SUCH a GREAT project!! At first I didn't think it was a good idea, but in the end I TOTALLY AGREE with you keeping the surfaces of the metal in a matte finish.... Yes glossy and mirrored would be great to look at, but it would be COVERED ion fingerprints by the time anyone gets done solving the puzzle.... And seeing it all glossy isn't very inviting to play with because everyone will be worried about fingerprints... but leaving it matte says "PICK ME UP AND PLAY WITH ME!!!" and thats EXACTLY what you want with a puzzle! FANTASTIC WORK!!!! and you go to show off the smaller kilns you9 have AND some of your woodworking skills (personally I would have made the walnut a dark glossy finish because of the matte cube, but it's YOUR 'Alumix Cube" lol ) - You REALLY make me want to make/buy a kiln and start having fun LOL - I just don't have all the tools to finish up the melts... or the patience LOL - 7 HOURS?!?!?! WOW!!! :) Good Job!

Another great build! Very cool.

So cool with all the different metals used for the pieces.

Trabalho incrível mano. Parabéns 🇧🇷

Watching you making yourself a new Saw would be very interesting, just like all of your videos!

I remember these in wood in the 1960s, sold under the name of Cuboids. It was a great puzzle.

Lovely build! And this is why cast metal puzzles are so expensive!

Cool thanks for getting back at me.

Just wanted to let you know that this puzzle cube some of your best work!

U R one crazy artist. U would certainly make Fine pieces of Jewelry !

I love metal puzzles. And Robinson Foundry!

Excelente trabajo!!!

It's incredible, quite a collector's item. You did the most difficult thing (melt the piece) and it was more difficult for you to assemble the puzzle 😝

I love the wood basement, great work man

Love it 👍 Great precision

Penny can fly. I got a shih’tzu, my first dog, three years ago. She surprised me by how athletic she was racing around. I hadn’t realized shih’tzu are in agility competitions. Awesome surface finishes. Very fidget friendly looking.

This kind of reminds me of the dovetail cube clickspring made a while back. Sick video!

Outstanding craftsmanship

Amazing craftsmanship.

your content is always delightful to watch!! keep up the work!!

The molds look like Russian castles

@rotten-Z

4 ай бұрын

More like a bunch of russian soldiers in the cold after an attack on ukrainian positions

My favorite part of this build 4:19 😀

Great work! But I think it will be easier to mill such cubic forms rather than cast them so precisely and mill it anyway at the end :)

That is totally awesome!! Keep em coming!!!!

Hi! I love your videos. You’ve inspired me to try my hand at lost PLA casting. I even built my own small foundry! I know you cover this in a few videos, but I was wondering if you would possibly make a video explaining how to properly set up a mould and how to determine what direction a Part should sit? I know you add runners and vents and all sorts of things. My projects seem to be fairly complex shape wise and I am having trouble figuring out what direction they should be poured from and what direction would make metal reach every nook and cranny so to speak. Thank you for the awesome videos!

This is called a Soma cube, I do believe. I had a plastic one back in early 70s. There are a series of different objects you can make from these blocks. Wish I had the equipment to make one myself. It was a nice trip down memory lane to see you work creating something made from plastic so long ago. They are referred to as a a solid dissection puzzle.

Your vidioes are allways so educational and fun to whatch keep up the good work!

Beautiful work.

You sir, you are a true master!

Awe I love Penny I have two jack russels of my own…. Great dogs!!!!

As much as I like seeing these amazing videos, I would also like to see more of your Jack Russell doggy in your videos. He/she is gorgeous, just like my one. Please show-off your dog much more than a split second. keep up your excellent work. Thanks.

Have you ever looked at that casting ceramic under UV light? You could film the dipping part in blacklight!

Thats really funny my jack russell doesnt stop moving ever.

Looks great again, man! If you sand in circles instead of straight lines, you won't get such deep grooves in the workpiece. That's why oscillation sanders excist

Very nice, thank you for sharing it.

AWESOME ❤

One word for easy finish..... sandblasting!!!

I still have our Soma cube from the 1970s.

Very cool project! I enjoyed it.

Very very creative and beautiful that's a very exciting

I think things like Polycast are probably best suited to beginners, because experienced people like RF have more to lose by putting time and energy into learning the intricacies of a new material than they do by continuing to work with something they know inside and out

Very impressive !!!!!!!!!!!!

That aluminum pour was clean

Great video! Do you have any ideas for how to avoid the porosity issues in the aluminum pieces in the future?

Technology for the win

Now do a Rubik's Cube. Indestructible! (but it has to be movable/working, obviously)

Gonna get one made in Gold, Rose Gold and Platinum

Looks good!

looks awesome!!

Can’t believe you did all this only to put them in a mill… coulda done that at the start and saved days 😂

Very cool project and video showing the process! When you used the wet sandpaper and granite block for sanding, how did you keep the sandpaper flat like that as you moved? Is there a particular brand you use that has adhesive on the back?

The amount of precision, preparation, and detail you use. The obsession with getting every aspect perfect. This is truly autism porn hahaha and I'm hooked.

dude, this is ssssso awesome

Looks Amazing Great video

What model is your belt sander? Looks like a cool setup! Love all of your projects!

The thing with puzzles like this is that once you have figured out how to solve them you never really forget. At some point it just gathers dust or you get rid of it.

@jaysgood10

11 ай бұрын

Try this mister no imagination kzread.info/dash/bejne/p5V_l9iMhbS5gdo.html

Jack Russel Terriers are the best medium-small dogs, you can’t change my mind on that

I know the liquid aluminum is molten hot, but I so desperately want to touch it. It looks like it’d be so satisfying

@OmniversalInsect

Жыл бұрын

Try searching for gallium

Beatiful as always

I would totally buy one of these

I like your work, go from 3d print pla to metal, great, I was wondering if you could print a structure of a brushless motor that is put on the drones both where the winding would go and where the magnets would go, there are many stl of Those structures of that engine, do you think you can demonstrate that it can be made of metal?

I'm an apprentice machinist by trade, and I am both impressed and puzzled. I don't get to forge my own base metal, so the entire process is interesting. It really makes me curious about how quickly a standardized block mould could be used to produce blocks to recycle some of our scrap on site. Unfortunately, due to the amount of parts my shop needs to produce, it isn't really viable since all of us are high skill workers. To make enough money to cover our salaries we can't spend time molding then machining rough stock down to size for every job, when we can just order from the suppliers something already roughly the right size. As for my puzzlement, in my experience, a handheld angle grinder with a cutting disk would have been a better option than the hacksaw for saving time, since you were going to grind down the marks left with a belt sander anyways. Also, since you have a milling machine, why didn't you use a 45º debur tool to prep those chamfers? The only spots that type of tool can't reach are the inside of those interior corners, which you could then finish with a hand file. Aside from that, the finish you decided to use is the mark of a gluten for punishment. It looks great, don't get me wrong! I just hate the amount of work that goes into it when a milled finish looks just as shiny. Then again, I always liked the curves left by face milling so that's probably just preference. It does look good though.

@robinson-foundry

8 ай бұрын

Thanks! The process I used was mostly for the sake of entertainment. If I did it solely for myself I would have just entirely machined the pieces. As for the chamfers, the cast parts weren't very symmetrical so getting them square in the vice would take forever.

Hi and many greetings from germany.... its so great, what you have made there!!! I love it! Do you sell this kinf of handcrafts? I am impressed! Jörg

Only thing i can say is maybe some buffing of the metal parts to really smooth them off?

what would interest me do you have corrosion issues? I imagine the aluminum will look quite bad after some time due to galvanic corrosion, maybe galvanizing would help. Also the copper should develop patina which can add character but you're going with a polished finished so it might don't look so nice anymore after couple of months.

Great work. 😄😄

Tangram square, done in the same materials. Would complement the cube as another geometric puzzle.

If you heat the molds together with a crucible with metal, and then pour the metal into a hot mold, then the smallest details of the mold will be imprinted on the casting. Even fingerprints, if left when creating the mold

You should make a copper frame to hold the sand for you 2-half sand-casting projects. This way you don't burn the wood every time, and eventually risk it breaking when you pick it up. It would be a useful project to do... imho :)

late night upload, nice

Would be nice highly polished

That is a nice little tip that for some reason never occurred to me at 13:53 purposely leave the mixing stick and remaining epoxy next to the part your epoxying (I usually clean it up right after applying while waiting for the part to cure) so that you can use it to tell when the epoxy is cured. (I usually have to poke at the epoxy with something or try to lightly move it to test. Neither ideal, lol) So simple an idea. Never know ehat little tricks you might pick up just watching how someone else works! Thanks

Awesome

Are you preheating the ceramic shell before pouring? This is crucial to be able to capture the detail in the model.... granted there is no detail for these but I mean in general, do you preheat?

I don’t know how similar of a suggestion it is but It is a series of interconnected parts. I have mentioned it before, but gosh golly gee willackers, I really do think you could take a mean crack at the Gingery metal shaper. You’d probably have to to a send cut send order for the machine ways but 3d printing the casting molds would be beautiful.

So something I'm curious about is if the Polycast filiment leaves no ash, does it still emit harmful fumes when it is vaporized like the PLA does? Did dyou ask about this and test it? Bceuase if you don't have to do the melt-out first and can just fire to 1500 right off the bat that would be great.

Cool Vid!

very cool

How does the diligent not dissolve more in the vapor? What makes it smooth, not disintegrate?

Your Content Reminds Me So Much Of Grant Thompson (TKOR). Nonetheless, Great Work!!

@da_beaver

Жыл бұрын

Rip to him

good work

this is a soma cube. popular in the 1970s. one of the whole points of the cube is that it can be configured into many different shapes, not just a cube.

HI I would like to ask a question❓ what do you do with the old petra bound after casting? And how much does it cost THANKS

Hey! I wanted to make one like you did but I couldn't find all the things to buy to make it

I love the fact that molten aluminum doesn’t even look real and also the fact that it kind of looks like silver when it’s in its liquid form

That’s very impressive, how did you learn?

😮 welcome back

You could do a metal Rubik's cube. :D