Making a knife handle, Wooden knife handle
Тәжірибелік нұсқаулар және стиль
Making a knife handle, Wooden knife handle
G'day Everyone and welcome back to the channel.
Today I am making a Bushcraft Knife, Timber knife handle, Knife making, Wood knife handle, how to make a knife handle, Diy knife making
Enjoy and Thanks for watching
Also, sometimes I link Amazon Affiliate links in the description. Shopping from these links supports our channel with a small commission without any additional cost to you! So Thank you for using these links!
Equipment I use
Australian Links
Cleco clamps amzn.to/3l6pL2I
Cleco Pliers amzn.to/3iREI6a
G flex Epoxy amzn.to/3zPYAh3
Lansky Diamond stones amzn.to/3CNEVAn
USA Links
Cleco clamps amzn.to/3x4kpri
Cleco Pliers amzn.to/37bDiP1
G flex Epoxy amzn.to/2LNCY1g
Lansky Diamond stones amzn.to/3xPzNZ6
Any questions that you have about custom knives or smithing feel free to contact me via:
Email
mailto:darren@downunderfarmandforge.com
Webpage
downunderfarmandforge.com/
Facebook
/ downunderfarmandforge
Disclaimer:
The use of Power, gas, fire, electrical tools and devices can be dangerous, please seek professional training before undertaking to do so.
Any tools or techniques shown hers are purely as I do it and for illustration purposes only, they are not professional training and should not be considered so.
Пікірлер: 128
Gotta admit, I had low expectations at first, but damn did that turn out beautiful and impressive!
@DownunderFarmandForge
9 ай бұрын
Thank you kindly, glad I could impress
excellent video. no bs just what it says in the title PROPS !
@DownunderFarmandForge
18 күн бұрын
Thank you
Great grain on that fabulous looking wood 👍🏼👍🏼😎
@DownunderFarmandForge
Жыл бұрын
Cheers Mate, I love Tasmanian Blackwood
Holy shit man fix that bandsaw! Gave me chills
@DownunderFarmandForge
9 ай бұрын
This is a cheap convertible band saw, so doesn't do vertical perfectly. I have an adapter kit for it but no room for it once it is off the standard base. Gets the job done until I have a larger shop to work in
@gregmoore2073
Ай бұрын
the drill press frightened me, but for real, those shaky hands using power tools is the scariest part of all!
Beautiful knife.
@DownunderFarmandForge
Жыл бұрын
Thank you
nice job man, it’s better than anything I could do
@DownunderFarmandForge
7 күн бұрын
Cheers mate, practice is all it takes
What a gorgeous knife! Love how the wood is worked and treated to highlight its beauty!
@DownunderFarmandForge
Жыл бұрын
The wood is the the highlight of the knife in this one for sure.
Beautiful knife
@DownunderFarmandForge
Жыл бұрын
Thank you so very much
Damn that’s nice
@DownunderFarmandForge
7 ай бұрын
Thank you very much
Nice handles
@DownunderFarmandForge
Жыл бұрын
Cheers mate
Браво
@DownunderFarmandForge
9 ай бұрын
Благодаря ти
Go on then, have a like 👍
@DownunderFarmandForge
5 ай бұрын
Thanks
Beautiful wood
@DownunderFarmandForge
4 ай бұрын
It sure is!
That’s beautiful Type of wood is that Semper Fi my Friend
@DownunderFarmandForge
Жыл бұрын
Cheers mate. It is Tasmanian Blackwood
@andnowi
5 ай бұрын
@@DownunderFarmandForgewow, I'm going
That's a nice job.
@DownunderFarmandForge
6 ай бұрын
Thank you! Cheers!
It's beautiful then turkish walnut
@DownunderFarmandForge
Жыл бұрын
It is a really pretty timber
Cool!
@DownunderFarmandForge
Жыл бұрын
Thanks Lori, working on some micarta
Very cool
@DownunderFarmandForge
8 ай бұрын
Thank you
Turn out beautiful. But yeah, I'm worried about your bandsaw
@DownunderFarmandForge
18 күн бұрын
Metal cutting bandsaw with a free hanging motor, does the job but not what it signed up for, all good
u made it look to easy .
@DownunderFarmandForge
Ай бұрын
Lot's or practice and it becomes fairly easy
That bandsaw scared the shit out of me!
@DownunderFarmandForge
11 күн бұрын
Camera angles can be deceiving, that and I have spent a lot of time using it so what seems like a tricky task with dangerous hand position is actually the safest way to use the tool for the job.
@Edwards7084
11 күн бұрын
You did a fantastic job nevertheless, a good looking blade that turned out to be, keep up the great work. What wood type was that btw?
@DownunderFarmandForge
11 күн бұрын
@@Edwards7084 spalted Blackwood it is a Tasmanian timber.
Gorgeous
@DownunderFarmandForge
Жыл бұрын
Thanks Jenn
Damn, that bandsaw is chugging like it wants to throw a band…lol! Nice wokr
@DownunderFarmandForge
6 ай бұрын
Joys of a muti position band saw, will cut vertical and horizontal but is not great at either, me pushing how much I can twist it in the cut to get around corners doesn't do it any favours either, but it struggles on through. Thank you
@davidswitzer5743
6 ай бұрын
Well that makes sense! Great work regardless and helped me on my first handle.
Really well made knife and video!
@DownunderFarmandForge
Жыл бұрын
Thank You kindly
Bellísimo trabajo amigo saludos
@DownunderFarmandForge
Жыл бұрын
Muchas gracias amigo
Wow nice looking knife Darren, Great work
@DownunderFarmandForge
Жыл бұрын
Cheers Brother, Jake giving me work for the trip as usual, 4 for him this time.
Bad knufe, cool
@DownunderFarmandForge
Жыл бұрын
Thank you
Heyyy man nice video i was just wondering what kind of glue you use when u put the two pieces of wood together with the knife
@DownunderFarmandForge
5 ай бұрын
G flex Epoxy amzn.to/2LNCY1g this is my go to glue
how long did this take to make (beside the scary way you made it, the blade and handle ended up so Beautifull)
@DownunderFarmandForge
11 күн бұрын
Normally takes me a couple of days start to finish on 1 knife, but they are not full days. nothing scary in how it's done, just lots of practice with my tools.
Probably need to change the rubber on the bandsaw wheel, a bit of electrical tape would do the job
@DownunderFarmandForge
2 ай бұрын
There is no rubber on the bandsaw wheels, has always been a direct metal to metal connection from new.
Is that just a belt grinder for the wood?
@DownunderFarmandForge
7 ай бұрын
No Adjustable speed setting on the belt grinder so it will do both steel at high speed and dial down to to timber at low speeds, I can turn it down even more and do leather on knife sheathes as well.
14inch automatic switchblade in stainless
@DownunderFarmandForge
Жыл бұрын
Switchblade are illegal to own here in Australia, all my work at this stage is in fixed blades
Is it just me or are your hands shaky? Hope your doing alright
@DownunderFarmandForge
Жыл бұрын
I was suffering fairly badly with thyrotoxicosis while filming a lot of these short videos, so yeah the hands were pretty unsteady at that time. Managed to make it through without grinding myself any more than normal, and thanks to a great doctor and Endocrinologist am almost back to normal Thyroid levels now. Thank you for noticing.
Whatch out for the drill i Ve Lost One finger like this
@DownunderFarmandForge
Жыл бұрын
I am always careful with all the tools, even if it doesn't look it. I find the the best compromise between speed and safety, fully safe would be clamping it down with 2 clamp or using a fence, by clamping it in place with my hand it is reasonably safe in that it can not build the momentum for a swing around (helicopter) but if the hands are not as callused as mine yes it might give you a tear if it grabs. 30 years as a tradesman working with tools I know what I can get away with with a small risk, that is why all my making videos have a disclaimer that these are for entertainment not education.
What kind of machine did you use to cut the wood ?
@DownunderFarmandForge
3 ай бұрын
Table saw to split blocks to scales and my metal cutting bandsaw to trim the scales to handle shape
nail
@DownunderFarmandForge
Күн бұрын
????
Hi, wondering if you could tell me what kind of drill press and bit you use to make the holes for your handle. additionally, what's the least expensive way to make a good hole in the handle if one can't afford a drill press?
@DownunderFarmandForge
Жыл бұрын
Lol affordable isn’t really the way I do it, drill press is a must but honestly mine is pretty much the cheapest at the hardware store my bits on the other hand are pure carbide drill bits in 1/4 and 1/8 inch, that is the expensive part. Drill press is pretty much a required item as it will keep everything straight, hand drills work but any angle change will wreck the line through the scales and knife. My drill press cost about the same as 2 sets of good scales so worth the money. Cheapest drill Brit’s go masonry drill bits wit carbide tips and use a drill sharpener or if you are good a grinder to put a metal cutting angle on the top, these will get the job done, other options are lots of HSS drill bits, sharpening often, and there are a couple other better bits around as well. Carbide is the best as it will even cut hardened steel. Other than that make sure the steel is annealed, that will help with cutting and make it easier to drill
@HydraPlz
Жыл бұрын
@@DownunderFarmandForge a very thorough answer, Thank you! I really appreciate the detail. very much excited to subscribe and see what else you have going on.
@DownunderFarmandForge
Жыл бұрын
@@HydraPlz thanks for the subscribe, always happy to answer questions. Not much point me showing people how to do things then not backing it with the details.
What are the materials needed to make a knife? I need a list
@DownunderFarmandForge
Ай бұрын
Hardenable steel, glue, your choice of handle material and pin material. these are the basics for the material required.
@James_Henriquez
Ай бұрын
@@DownunderFarmandForge ah ok thanks I will try it some day!
Рукоять можно было сделать красивее!
@DownunderFarmandForge
Жыл бұрын
Как бы вы это сделали?
@user-zl3gl4rv7e
Жыл бұрын
@@DownunderFarmandForge не могу выложить фотографии своих ножей!
@DownunderFarmandForge
Жыл бұрын
@@user-zl3gl4rv7e Этот дизайн основан на некоторых отличных ножах и хорошо лежит в руке. Во что бы то ни стало, напишите мне, если хотите.
@user-zl3gl4rv7e
Жыл бұрын
@@DownunderFarmandForge я делал ножи на заказ точно по форме руки заказчика делал рукояти,использовал дерево венге,мирбау, макоре ,махагони,Касипа,платан,белый клён,делал форму рукояти чтобы показать всю красоту структуры древисины!
@DownunderFarmandForge
Жыл бұрын
@@user-zl3gl4rv7e Большинство моих ножей изготавливаются по индивидуальному заказу, чтобы соответствовать руке каждого человека, иногда я получаю такой заказ, где кто-то должен дать 3 ножа другим людям, которых я не знаю, поэтому я не могу спроектировать их руку. Но я всегда получаю комплименты независимо от того, предназначены ли они для одного человека или нет, о том, как мои ножи подходят к руке. После сотен ножей у меня ни разу не было жалоб на подгонку руки, так как я трачу много времени на правильную форму рукояти, независимо от того, в каком стиле она сделана. Некоторые стили, подобные этому, я бы не стал делать для себя, но они соответствуют дизайну ножа, но все стили рукояти должны хорошо подходить для руки для работы, для которой предназначен нож.
that poor bandsaw
@DownunderFarmandForge
Жыл бұрын
I’m a little lost with this comment, how is my metal cutting bandsaw suffering from cutting timber🤷♂️
@humanbeanchikin
Жыл бұрын
@@DownunderFarmandForge it just sounds sad
@DownunderFarmandForge
Жыл бұрын
@@humanbeanchikin cheers, it screams a little but one heck of a little machine
Please tell me if painting is better than oiling? Which one should I choose for my knife handle?
@DownunderFarmandForge
Жыл бұрын
I would not paint on a handle, paints tends to rub the hand and cause blistering with use. This is what I use to finish the handles kzread.info/dash/bejne/pZuNo5uLkbzRo6w.html
@maxgeorge5376
Жыл бұрын
Sorry , it's not paint but wooden polyurethane.
@maxgeorge5376
Жыл бұрын
Which one should I use polyurethane or oil.
@DownunderFarmandForge
Жыл бұрын
@@maxgeorge5376 personally I would go oil or a wax/oil mix over polyurethane. Polyurethane sits on the surface and same issue with hand rub as a paint, plus any scratch then opens a path for moisture, which will go in a surface scratch easily but struggle to get out the same scratch after it works through the wood with capillary action. Oils and wax/oil combos tend to soak through to more depth which means a better protection over time. Stabilised timber which I use for most my handles has less of an issue than a normal piece of timber, but I still apply a finish of polish before sending each knife to the client.
@maxgeorge5376
Жыл бұрын
@@DownunderFarmandForge thank you very much for your precious answer, your knowledge utterly helpful .💞
The glue is…?
@DownunderFarmandForge
11 ай бұрын
G flex Epoxy amzn.to/2LNCY1g
Does the pins even do anything when you don't peen them?
@DownunderFarmandForge
4 ай бұрын
Still blocks lateral movement, doesn’t need to be peened for that. I prefer them un peened as you can apply them at glue up and grind the handle to shape with them in there, also peening pins is about fastest way to split wood with the burl timber I normally use
What is the name of the metal you use to fit in the wood?
@DownunderFarmandForge
11 ай бұрын
The pins on this one are Copper, 1/4" 6mm hollow to the rear and solid to the front. I just buy them as bar stock.
Buttelfly wooden handle
@DownunderFarmandForge
8 ай бұрын
Thank you
Hello, what glue did you use? To glue wood together ?
@DownunderFarmandForge
Жыл бұрын
This is my preferred Glue G flex Epoxy amzn.to/2LNCY1g
@EliasStribrny
Жыл бұрын
@@DownunderFarmandForge thank you
How are the shorts working for you?
@DownunderFarmandForge
Жыл бұрын
Trying to keep them in line with my content more now and reasonably well, harder to catch attention and hold it in the shorter time as the people that generally watch them are after quick fulfillment
@gardeningperth
Жыл бұрын
@@DownunderFarmandForge Very true. The challenge of making one in less than a minute.
@johncxvii12
Жыл бұрын
@@DownunderFarmandForge you could offer a link in the short to a full length video.
@DownunderFarmandForge
Жыл бұрын
@@johncxvii12 hey John I don’t have the full length on this knife done yet. Because they are so short trying not to clutter the shorts. Here is another handle that is just wood with no bolster. How to make a knife handle with wood kzread.info/dash/bejne/nKd4rNGGmbmrp8o.html
Jenis kayunya apa ya😞
@DownunderFarmandForge
10 ай бұрын
Kayu hitam Tasmania
н да.
@DownunderFarmandForge
Жыл бұрын
Хвала вам
Кур воровал?
@DownunderFarmandForge
Жыл бұрын
мой дизайн
Я таки дыко извняюсць.... А шо за сталь на сверле,если так каленку сверлить...ааа???
@DownunderFarmandForge
Жыл бұрын
the drill is carbide
ногти что у раптара
@DownunderFarmandForge
Жыл бұрын
Спасибо за просмотр