Wow, this is fascinating! A very lightweight but strong box! Coroplast is an amazing product. I never knew how to bend it till now. That is marvelous. Wonder how much those heating elements cost? You are a genius to have conceptualized this box and built it. Very well done! Very inspiring. Thank you!

from South Africa, always humbling to watch an artest creating

That was a lot of work. Love the finished product.

That's amazing!. Thanks for sharing.

you sir are a master craftsman with plastic!

LOVED this! Thanks so much for sharing it with us

Whoa! This is phenomenal!!

Very, Very Nice!!! Budget friendly and lightweight. Fantastic build.

@stevemazz3121

5 жыл бұрын

Did you say budget friendly... the tools and materials used for jigs, heat, forms, plastics, etc. would cost well over $1000 dollars.

@sweetgeoaries

5 жыл бұрын

I have no idea how he did the inside, you need Lots of tools and other material, too complicated. I guess this box costs like a million dollars in the end, too much work!!!!!!

Wow- ingenious. Great job!

Can you please tell me exactly what type of rivets these are or better yet provide a link to them? Thank you!

Well done sir

would you please let me know from where can get the heaters? is it 220V. and the hangs and other accessories. regards

How did you make those first big cuts so straight? & How did you know where to bend the plastic?

looks very good and seems tough enough, however how many kilos can it carry? It's large so it fits lots of pots.. but cast iron is a no no

Why did you "stamp" the rear vertical corners like a hinge rather than bending them? Also, what dimensional allowances do you make at the corners to get the final inside or outside dimension you are striving for?

Very nice. One question, shouldn't the doors shut under the top portion so that the water doesn't run into the box, or down the corrugated portion inside the doors?

where can I get some of those nylon plastic rivets?

What do you use for heating element?

What I like about this kitchen is that it is super light weight. Wooden kitchens are waaay too heavy.

should have used magnets for the cabinet's doors, i think that would be better

Pure Genious! I am trying to put together a camping system for a Honda element and something along this scale would be perfect. I am not tooled up to do such a project and will have to hire it done. Boxes like this would be perfect and would hold up to moisture! If i run into a snag or have questions at a leter date would it be possible to get suggestions from you so that i may have a fantastic camp set up?

@mjremy2605

Жыл бұрын

Build it out of wood. Look at the Australian system of extension slides that stretch outside. Look at Drifta. This little box will not be suitable for your needs. You need a kitchen install. Do your research on KZread. You don't need to ask anyone. Its all there. Get familiar with power tools and do it yourself too. Too many women are afraid to try using power tools. Cooking, sewing, knitting, child rearing is much harder than building with wood or plastic. Just do it. GENIUS, not GENIOUS.

where can I buy the plastic? Would like to build large tower garden system for high pressure aeroponics.

@ShopperPlug

2 жыл бұрын

@@CampingKitchenBox Thank You.

Very interesting. I didn't know you could build something like that with corrugated plastic. How did you make the straps with the side release buckle's?

@mjremy2605

Жыл бұрын

You have to sew in the side buckles, unless there is a way to heat seal them in. KZread should have videos. Sewing that thick webbing requires a commercial sewing machine or heavy duty one. Any dry cleaner should be able to sew these for you. The other way is to loop webbing into the buckles till they are secure, without stitching. Here is a video: kzread.info/dash/bejne/Zax2mpiFnZrccto.html

ผมว่ามันเยอะไปครับ ถึงขนาดทำที่หิ้วที่จับวุ่นวาย คือ มันไม่น่าจะใส่อะไรได้มากมาย หนักขนาดจนต้องหิ้วกันขนาดนั้น เพราะกล่องแบบนี้ มันไม่ได้แข็งแรงมากมายอะไรเลย

WOW NICE JOB,,,,DO YOU SELL THE BOXE'S ,,,,,IS THE SHEET'S CORFLUTE ,,,,,

Excellent video! When you say that you stamp the hinge, what does this mean? can you explain the process please? What is underneath the line of the hinge when you press down, on the Corrugated plastic, with the wooden block? Hope you can help Once again thanks for a great video

@PiotrModzelewski

9 жыл бұрын

***** Hey, I've got one question 4u too. Do you know any alternative way of heating the plastic to stamp a hinge in it? I need to stamp ~5 foot long hinge into 5mm thick plastic. Also i have a question about durability of that type of hinges. How strong are they? Did they ever broke on you? Tranks for this vid and have a nice day!

@mjremy2605

Жыл бұрын

He heats up the plastic sheet in one area in a straight line. When very soft, he presses down with a tool that compresses the corrugation inside and flattens it in one thick line. Now it is easy to bend that area, without compromising structural integrity. It is not cut on one side. It is intact, compressed, but flat not thick, so bends easily like a knee joint. This becomes a piano hinge if you will. You can improvise your tool of choice. Use a rounded stick or rounded metal object to press down. What is underneath is a stiff surface like metal, wood, stone - any stiff countertop will do.

Question in your plans that you have for download do you tell where to buy all the components and how/where to get the heater? I think this is a great project for our Troop to build as we could use 5 of them Thank You

@CampingKitchenBox

20 күн бұрын

Yes, The plans should give you all the information to build the box. If it is for a scout troop, contact me through the website I will set you up.

Where do you get those nylon rivets? Amazon only seems to have ones for car door panels.

@craigduddles5650

6 жыл бұрын

Also have these... maybe the kind he uses: www.amazon.com/gp/product/B075X25Y7Q/ref=ox_sc_act_title_1?smid=AINDWXLSWW3YN&psc=1

How to make the heat bender?

They use heat to bend in this case - although only 6 mm

What if you don’t have a heat bender?

how much weight can the box hold if the box was mounted to a wall or roof? I would love to install head in my van to carry canned goods

@mattl7886

6 жыл бұрын

For Caned goods, I recommend building with ply wood and routing out sections to reduce weight, or build with Alecubond (Brand name of PP plastic sandwiched between two sheets of aluminum.)

what size plastic rivets do you use?

@xxmightyonexx

8 жыл бұрын

+Franklin Feliz Great video CampingKitchenBox! What did you do the initial cuts with? What type of knife was that? Will any do?

Now where did I leave my plastic heat/bender? Everyone has one of those right?

@aphorismforthebrain

4 жыл бұрын

he's showing you how he made it, not telling you that you can or should.

Isn't going to take much opening and closing for those "living hinges" to crack and your doors to fall off. Might as well put real hinges on it. Otherwise, cool project.

@russelmoody4613

7 жыл бұрын

CampingKitchenBox

@mjremy2605

Жыл бұрын

I don't think so. The Coroplast was not cut. It was compressed making it very strong. Its not a brittle material.

Get a second camera for hand work perspective.