Making a brass worm wheel. This worm wheel is supposed to drive a home made power hack saw that I'm building. I hope to come back to that subject later...
Жүктеу.....
Пікірлер: 124
@BITTYBOY1213 жыл бұрын
Sky's the limit when you have a lathe, a mill and a good melting furnace ! - Fantastic work - Well done. 10/10 👍👍👍
@tompas11A3n52KkX
3 жыл бұрын
Thank you!
@BITTYBOY121
3 жыл бұрын
@@tompas11A3n52KkX You're very welcome. All the very best of luck with your projects. 👍
@dumbo8003 жыл бұрын
Gear cutter, here. Color me impressed. I've never seen an actual homemade hob that was actually homemade. Most folks usually go for a tap on its side when possible. Keep in mind, hobs are not exactly a worm with gashes. There is extra room at the tooth tips to add clearance in the root. Still, I'm damned impressed.
@tompas11A3n52KkX
3 жыл бұрын
Thank you very much. This was something of an experiment to see if it could be done this way and obviously it worked. I am by no means a professional in machining but simply an amateur who tries his hand on this and that.
@chrishayes5755
2 жыл бұрын
@@tompas11A3n52KkX well done. subscribed to see what u come up with next!
@tompas11A3n52KkX
2 жыл бұрын
@@chrishayes5755 Thanks much appreciated.
@aubreyaub6 жыл бұрын
My metal band saw, is just about due for the same treatment. Thanks for the proof that this way does work.!
@tompas11A3n52KkX
6 жыл бұрын
And thank you for watching and comment.
@djberg34837 жыл бұрын
thats so rad, from scrap to function, i love it. just got into playing around with a foundry, and the mission of this year is to put a mill and lathe in the shop. i cannot wait to start really making my own what ever i need!
@tompas11A3n52KkX
7 жыл бұрын
Thank you. Yeah something like "from wheat to bread" so to speak. Good luck with your foundry and to get some machinery. Don't forget to put up some videos of your work.
@thisissoeasy6 жыл бұрын
A thing of utter beauty! Respect!
@tompas11A3n52KkX
6 жыл бұрын
Thank you very much!
@gopichandbhardwaj13992 жыл бұрын
Good Sujetion 👍
@tompas11A3n52KkX
2 жыл бұрын
Thank you!
@richarddupont84312 жыл бұрын
I have to agree sky's the limit when you got to lathe and a milling machine and a furnace
@tompas11A3n52KkX
2 жыл бұрын
That's true.
@colleyenow55074 жыл бұрын
I appreciate you people for your creativity ,keep up
@tompas11A3n52KkX
4 жыл бұрын
Thanks Colley!
@captainedc7 жыл бұрын
quite impressive! Truly a lost art. You have my respect. Great job.
@tompas11A3n52KkX
7 жыл бұрын
Thank you!
@joudymambu9608
7 жыл бұрын
captainedc trimakasih atas contoh pengLamannya bisa kami pakai joudy
@vijayvohra4008
6 жыл бұрын
captainedc
@marchm786 жыл бұрын
Great video and good idea on the coffee can 🥫😝
@tompas11A3n52KkX
6 жыл бұрын
Thank you! I usually take what I have at hand and use that to suit my purpose and the coffe can in this special occasion just suited me fine. :)
@marchm78
6 жыл бұрын
tompas11 That is awesome please continue uploading videos 😁
@shadrin4996 жыл бұрын
по английскому в школе была двойка.))) не могу я на нём говорить. Ваше видео оч мне помогло ещё в феврале. именно с помощью Вашего видео я восстановил оч дорогой редуктор одному хорошему человеку. вечерами,после работы,есть немного времени. хочу сделать печь как у вас.
@tompas11A3n52KkX
6 жыл бұрын
приятно, что мое видео было полезно для вас.
@dr76153 жыл бұрын
Nice job! Nice hob..
@tompas11A3n52KkX
3 жыл бұрын
Thanks.
@fco.javierguerrero64195 жыл бұрын
SALU2 MI AMIGO YO SOY TORNERO FRECISTA POR MUCHOS AÑOS PERO JAMAS TUBE EL GUSTO DE GENERAR UN ENGRANE O CORONA FELICIDADES POR TU S CONOCIMIENTOS BENDICIONES DESDE MONTERREY MEXICO 👍👍
@tompas11A3n52KkX
5 жыл бұрын
Muchas gracias!
@josemariasainzdelamaza63345 жыл бұрын
Me fascina la mecanica y estos videos me proporcionan gran informacion practica ...Gracias .
@tompas11A3n52KkX
5 жыл бұрын
Gracias
@thepresentage73816 жыл бұрын
Great work....
@tompas11A3n52KkX
6 жыл бұрын
I did put a lot of job into this. Thanks for comment and watching! The tin can inside diameter was 6 inches and the finished gear outer diameter are 5 inches.
@christophe60797 жыл бұрын
Hello, I'm very impressed , good job .
@tompas11A3n52KkX
7 жыл бұрын
Thank you and thanks for watching. :)
@dimitar4y7 жыл бұрын
Aw, was hoping to see if it has any backlash!
@tompas11A3n52KkX
7 жыл бұрын
The backlash is adjustable. Maybe I show that in another video. Thanks for watching and comment.
@MyHeap7 жыл бұрын
Great video but I have one question. On your worm wheel blank, I see that you have cut the face concave. This is obviously to give the worm tooth more area to run in. I am guessing that the bottom of the concave surface is equal to the OD for the pitch you are cutting, OD = (N+2)/PD. This means that the outside diameter must be increased to compensate for the worm diameter. So my question is thus: How did you determine what additional amount to add to the worm wheel diameter to compensate for this? Did you take the difference of the chord distance to the center of the worm using a chord length the same length as your worm wheel's width. For example, lets assume the following, the worm diameter is 1 inch, and the worm wheel width is .375 inch. A chord measuring .375 inch on a 1 inch diameter circle would be 0.460 from the center of the worm. .500 (radius of worm) - .0460 (distance of chord to center of worm) = 0.040 inch added to the OD of the worm wheel. Is this what you done? I am really trying to figure out how to calculate this stuff. Many thanks for your time. Joe
@tompas11A3n52KkX
7 жыл бұрын
Hi Joe, actually I used the pdf-document I’m linking to below. The worm wheel has 60 teeths and the module is 2.0 Thanks for watching. www.mekanex.se/wp-content/uploads/snaeckhjul-skruvar.pdf
@MyHeap
7 жыл бұрын
Thank you for the link, although I will have to translate with Google I think. At any rate, great video! Joe
@carolwisniewski6954
7 жыл бұрын
tompas11 b
@richarddupont84312 жыл бұрын
I melt a lot of aluminum but I haven't done brass copper or cast iron yet
@tompas11A3n52KkX
2 жыл бұрын
Try it.
@josegalote53543 жыл бұрын
BOM DIA PROFESSOR TONPAS 11 O SR É UM ARTISTA E GRANDE PROFISSIONAL QUE DEUS JESUS MULTIPLIQUE SEUS CONHECIMENTOS OBRIGADO PELA AULA BEM EXPLICADAS.
@tompas11A3n52KkX
3 жыл бұрын
Muito obrigado
@kirkgeahlen55322 жыл бұрын
I was curious why you ran the cutter before you did the Hob I would have thought that the Hob would have just cut its own path like it doesn't when you do it with a tap?
@tompas11A3n52KkX
2 жыл бұрын
A little help doesn't make it worse.
@ganeshbhojane6523 Жыл бұрын
Super 😊😊😊😊😊
@tompas11A3n52KkX
Жыл бұрын
Thank you!
@josegalote53543 жыл бұрын
SERVIÇO MUITO BONITO DE MESTRE DEUS JESUS MULTIPLIQUE SEUS CONHECIMENTOS OBRIGADO PELA AULA BEM EXPLICADAS.
@tompas11A3n52KkX
3 жыл бұрын
Muito obrigado!
@shadrin4996 жыл бұрын
Cкажите,у меня имеется кг 5-7 бронзовой токарной стружки,есть ли смысл и толк пробовать вашим способом переплавить во фланей с нар ф 160,вн ф 100. Высота сколько выйдет. Или бронза из этой стружки будет шибко мягкой? На видео ваша бронза была визуально ну оч прям хорошего качества. оч плотная и без пор. Вы сыпали присадки?
@tompas11A3n52KkX
6 жыл бұрын
Я не могу по-русски, но я все равно попытаюсь ответит с помощью Google. Конечно, вы можете попытаться расплавить эти чипы Не думайте, что они будут мягче, чем сейчас. Я добавил немного буры в расплав. Благодарю вас за интерес. Это имело смысл? вы можете говорить по-английски?
@TramecGetriebe6 жыл бұрын
Nice work!
@tompas11A3n52KkX
6 жыл бұрын
Thank you! Vielen Dank.
@razumikhinjones62835 жыл бұрын
Daaaaamn, you really hobbed that worm wheel brah
@tompas11A3n52KkX
5 жыл бұрын
Thanks a lot.
@popibrazil7 жыл бұрын
Very good!
@tompas11A3n52KkX
7 жыл бұрын
Many thanks and thanks for watching too.
@barry-qr5hi6 жыл бұрын
Brilliant !!!!!
@tompas11A3n52KkX
6 жыл бұрын
Thank you!
@sasa-vd8ie7 жыл бұрын
wow!!!!! beautiful
@tompas11A3n52KkX
7 жыл бұрын
Thank you sir.
@tahirhaciyev915
7 жыл бұрын
Salvatore Ferrarello
@tannguyenduy5946
6 жыл бұрын
,
@aboahmadaboahmad35139 ай бұрын
لما هذه السرعة العالية في تفتيح الترس؟؟؟؟
@mauricecotton78855 жыл бұрын
Sir you inspire me 😀 I have a lathe and a mill and not much else including money lol My only problem was the cost of the melting as in the burner and fuel and something to melt the brass in. I had assumed that I would have needed to spend over£100 and more on burner parts refractory cement gas/fuel etc just to make only 20kg of brass and aluminium ingots. Do you think it would be worth me building a furnace? And how much do you think it would cost me to build? Ps I have a blower fan and plenty of steel containers/scrap. Gas tanks ready cut
@tompas11A3n52KkX
5 жыл бұрын
I'm glad that I inspired you. Would it be worth bulding a furnace? Yes! Because I don't live in your country it will be extremely difficult for me to answer your question about the cost. Anyway thanks for your comment and thanks for watching.
@mecanizadosgrela73806 жыл бұрын
congratulations, interesting homemade tool. What material was made of?, tempered the material?, thank you.
@tompas11A3n52KkX
Жыл бұрын
I wish i know...
@Speeder84XL7 жыл бұрын
WOW - riktigt snyggt ju. Precisionsjobb. Speciellt spåren där och när man skär ut dom 1 efter 1 sådär (som man ser efter 9:00 i filmen). Jag såg ingen utmärkning på arbetsstycket i förväg, men det kanske fanns (för det räcker ju med några hundradels mm fel, om man gör samma fel på varje spår - så blir det ju bara skit av alltihop).
@tompas11A3n52KkX
7 жыл бұрын
Tack för att du tittade och kommenterade. Uppskattas! :) Meningen är att detta snäckhjul och snäckskruven ska ingå i drivningen av en kallsåg som jag håller på och konstruerar, men just nu går det lite trögt...
@gordonfrank7 жыл бұрын
Was it difficult making a furnace that would melt brass? Assume you're powering with propane?
@tompas11A3n52KkX
7 жыл бұрын
Making the furnace for melting brass and alu was not that difficult. I used two metal tins and between them and in the bottom I used refractory cement and also on the lid. No I'm not using propane, I use a 50/50 mix of diesel and waste oil for the heating. Thanks for watching.
@Mudduck-bw7qb7 жыл бұрын
On the brass driven part why can't it be made of tougher metal as where i need a few made for a few mini tillers ? How much do you charge to make the brass gears ? Thanks for your time
@lovotcore6946
6 жыл бұрын
worm drives do a lot of rubbing, steel on steel would have galding problems where the two parts essentially try to friction weld together, brass on steel not so much, also the wheel has much more surface area than the worm, so it is best to minimize wear on the worm, brass won't wear out a steel worm very quickly.
@miguelcastaneda72365 жыл бұрын
looks like a Brown and sharp lead cam worm gear ...just saved around 350...500 $...if you were to make out of two pieces bolted together...for the higher end $ ..thats how company makes one to adjust for backlash
@tompas11A3n52KkX
Жыл бұрын
Thank you!
@moonpup62627 жыл бұрын
nice work!
@tompas11A3n52KkX
7 жыл бұрын
Thank you!
@ernestjoyner15537 жыл бұрын
do you still have all your fingers ??pretty close to the tool...
@tompas11A3n52KkX
7 жыл бұрын
Yeah, I still got 10 fingers when I was counting them the other day. :) Thanks for watching.
@DJM1LOVE7 жыл бұрын
art
@tompas11A3n52KkX
7 жыл бұрын
:) Thank you.
@TinkeringNerd6 жыл бұрын
It’s a nice! :-)
@tompas11A3n52KkX
6 жыл бұрын
Thank you very much!
@criticallook51627 жыл бұрын
Nice! What is the purpose of the holes in the hob? :
@tompas11A3n52KkX
7 жыл бұрын
This part actually came from a cars towbar or is it called a trailer hitch. I'm not sure. In swedish it's called a "dragkrok" Anyway the holes have no purpose at all, they where there from start so to speak. Thanks for watching and comment. :)
@criticallook5162
7 жыл бұрын
tompas11 Ahhh, _re-purposing_ - no need to relegate it to the trash bin. Good for the pocketbook. :
@tompas11A3n52KkX
7 жыл бұрын
Yeah free metal is good metal. :) And this piece was also good quality steel and was after I had machined it hardened.
@calvinbrown32136 жыл бұрын
the question is where did you get a metal coffee can. their all plastic here.
@tompas11A3n52KkX
6 жыл бұрын
Yes nowadays they are plastic, but the one I used was old, from the sixties. I only got three left that is that big. (1 kg coffee) Thanks for watching.
@shadrin4996 жыл бұрын
отлично!!!
@tompas11A3n52KkX
6 жыл бұрын
большое спасибо!
@johnmichael1583 Жыл бұрын
جيد جدا
@HP_rep_mek8 жыл бұрын
Snyggt!
@tompas11A3n52KkX
8 жыл бұрын
Tackar och tack för att du tittade. :)
@MichaelJeffers753 жыл бұрын
Tiltrotator?
@tompas11A3n52KkX
Жыл бұрын
Maybe.
@user-sj6ub8gq5m2 жыл бұрын
رائع ❤
@tompas11A3n52KkX
2 жыл бұрын
Sorry but I can't understand your language.
@user-sj6ub8gq5m
2 жыл бұрын
@@tompas11A3n52KkX wonderful
@tompas11A3n52KkX
2 жыл бұрын
@@user-sj6ub8gq5m Thank you
@rabindarakumar29955 жыл бұрын
Gear box bandana hai address send?
@tompas11A3n52KkX
Жыл бұрын
Maybe...
@govindvarma99656 жыл бұрын
govind varma technical Ingenyar VARKSOP
@tompas11A3n52KkX
Жыл бұрын
Mmm I do also think so.
@dennisdanich71905 жыл бұрын
Making the hob, showing the setup, would have made a great video, turning the blank was a ho hum, and BRASS instead of BRONZE
@tompas11A3n52KkX
5 жыл бұрын
Yes you got a point there. Thanks for watching.
@babavishwakarma7576 жыл бұрын
a
@tompas11A3n52KkX
Жыл бұрын
b
@businesstourMV3 жыл бұрын
Here you can see real globoid worm gear: @
@tompas11A3n52KkX
Жыл бұрын
No I can't.
@businesstourMV
Жыл бұрын
@@tompas11A3n52KkX BUSINESS TOUR
@tompas11A3n52KkX
Жыл бұрын
@@businesstourMV OK
@user-qs6nn5jv6i3 жыл бұрын
Чорнову обробку не показав.
@tompas11A3n52KkX
Жыл бұрын
???
@anworulislam15015 жыл бұрын
faltu work,,,,, parle full diben
@tompas11A3n52KkX
Жыл бұрын
Great!
@SirWilkins6 жыл бұрын
The brass you melted and pour in the tin can is not the starting point of this build, because the billet you work with is bigger than the tin can. But the finish gear has maybe the same mass as the brass in the tin can, could you not use it and then melt it down? for so pretend that this was the start of the build, not the end? All the lying and pretending pisses me off!
@tompas11A3n52KkX
6 жыл бұрын
I can tell you that you are dead wrong. The brass I melted and poured in the old coffe can is actually the material i made the worm wheel from.
Пікірлер: 124
Sky's the limit when you have a lathe, a mill and a good melting furnace ! - Fantastic work - Well done. 10/10 👍👍👍
@tompas11A3n52KkX
3 жыл бұрын
Thank you!
@BITTYBOY121
3 жыл бұрын
@@tompas11A3n52KkX You're very welcome. All the very best of luck with your projects. 👍
Gear cutter, here. Color me impressed. I've never seen an actual homemade hob that was actually homemade. Most folks usually go for a tap on its side when possible. Keep in mind, hobs are not exactly a worm with gashes. There is extra room at the tooth tips to add clearance in the root. Still, I'm damned impressed.
@tompas11A3n52KkX
3 жыл бұрын
Thank you very much. This was something of an experiment to see if it could be done this way and obviously it worked. I am by no means a professional in machining but simply an amateur who tries his hand on this and that.
@chrishayes5755
2 жыл бұрын
@@tompas11A3n52KkX well done. subscribed to see what u come up with next!
@tompas11A3n52KkX
2 жыл бұрын
@@chrishayes5755 Thanks much appreciated.
My metal band saw, is just about due for the same treatment. Thanks for the proof that this way does work.!
@tompas11A3n52KkX
6 жыл бұрын
And thank you for watching and comment.
thats so rad, from scrap to function, i love it. just got into playing around with a foundry, and the mission of this year is to put a mill and lathe in the shop. i cannot wait to start really making my own what ever i need!
@tompas11A3n52KkX
7 жыл бұрын
Thank you. Yeah something like "from wheat to bread" so to speak. Good luck with your foundry and to get some machinery. Don't forget to put up some videos of your work.
A thing of utter beauty! Respect!
@tompas11A3n52KkX
6 жыл бұрын
Thank you very much!
Good Sujetion 👍
@tompas11A3n52KkX
2 жыл бұрын
Thank you!
I have to agree sky's the limit when you got to lathe and a milling machine and a furnace
@tompas11A3n52KkX
2 жыл бұрын
That's true.
I appreciate you people for your creativity ,keep up
@tompas11A3n52KkX
4 жыл бұрын
Thanks Colley!
quite impressive! Truly a lost art. You have my respect. Great job.
@tompas11A3n52KkX
7 жыл бұрын
Thank you!
@joudymambu9608
7 жыл бұрын
captainedc trimakasih atas contoh pengLamannya bisa kami pakai joudy
@vijayvohra4008
6 жыл бұрын
captainedc
Great video and good idea on the coffee can 🥫😝
@tompas11A3n52KkX
6 жыл бұрын
Thank you! I usually take what I have at hand and use that to suit my purpose and the coffe can in this special occasion just suited me fine. :)
@marchm78
6 жыл бұрын
tompas11 That is awesome please continue uploading videos 😁
по английскому в школе была двойка.))) не могу я на нём говорить. Ваше видео оч мне помогло ещё в феврале. именно с помощью Вашего видео я восстановил оч дорогой редуктор одному хорошему человеку. вечерами,после работы,есть немного времени. хочу сделать печь как у вас.
@tompas11A3n52KkX
6 жыл бұрын
приятно, что мое видео было полезно для вас.
Nice job! Nice hob..
@tompas11A3n52KkX
3 жыл бұрын
Thanks.
SALU2 MI AMIGO YO SOY TORNERO FRECISTA POR MUCHOS AÑOS PERO JAMAS TUBE EL GUSTO DE GENERAR UN ENGRANE O CORONA FELICIDADES POR TU S CONOCIMIENTOS BENDICIONES DESDE MONTERREY MEXICO 👍👍
@tompas11A3n52KkX
5 жыл бұрын
Muchas gracias!
Me fascina la mecanica y estos videos me proporcionan gran informacion practica ...Gracias .
@tompas11A3n52KkX
5 жыл бұрын
Gracias
Great work....
@tompas11A3n52KkX
6 жыл бұрын
I did put a lot of job into this. Thanks for comment and watching! The tin can inside diameter was 6 inches and the finished gear outer diameter are 5 inches.
Hello, I'm very impressed , good job .
@tompas11A3n52KkX
7 жыл бұрын
Thank you and thanks for watching. :)
Aw, was hoping to see if it has any backlash!
@tompas11A3n52KkX
7 жыл бұрын
The backlash is adjustable. Maybe I show that in another video. Thanks for watching and comment.
Great video but I have one question. On your worm wheel blank, I see that you have cut the face concave. This is obviously to give the worm tooth more area to run in. I am guessing that the bottom of the concave surface is equal to the OD for the pitch you are cutting, OD = (N+2)/PD. This means that the outside diameter must be increased to compensate for the worm diameter. So my question is thus: How did you determine what additional amount to add to the worm wheel diameter to compensate for this? Did you take the difference of the chord distance to the center of the worm using a chord length the same length as your worm wheel's width. For example, lets assume the following, the worm diameter is 1 inch, and the worm wheel width is .375 inch. A chord measuring .375 inch on a 1 inch diameter circle would be 0.460 from the center of the worm. .500 (radius of worm) - .0460 (distance of chord to center of worm) = 0.040 inch added to the OD of the worm wheel. Is this what you done? I am really trying to figure out how to calculate this stuff. Many thanks for your time. Joe
@tompas11A3n52KkX
7 жыл бұрын
Hi Joe, actually I used the pdf-document I’m linking to below. The worm wheel has 60 teeths and the module is 2.0 Thanks for watching. www.mekanex.se/wp-content/uploads/snaeckhjul-skruvar.pdf
@MyHeap
7 жыл бұрын
Thank you for the link, although I will have to translate with Google I think. At any rate, great video! Joe
@carolwisniewski6954
7 жыл бұрын
tompas11 b
I melt a lot of aluminum but I haven't done brass copper or cast iron yet
@tompas11A3n52KkX
2 жыл бұрын
Try it.
BOM DIA PROFESSOR TONPAS 11 O SR É UM ARTISTA E GRANDE PROFISSIONAL QUE DEUS JESUS MULTIPLIQUE SEUS CONHECIMENTOS OBRIGADO PELA AULA BEM EXPLICADAS.
@tompas11A3n52KkX
3 жыл бұрын
Muito obrigado
I was curious why you ran the cutter before you did the Hob I would have thought that the Hob would have just cut its own path like it doesn't when you do it with a tap?
@tompas11A3n52KkX
2 жыл бұрын
A little help doesn't make it worse.
Super 😊😊😊😊😊
@tompas11A3n52KkX
Жыл бұрын
Thank you!
SERVIÇO MUITO BONITO DE MESTRE DEUS JESUS MULTIPLIQUE SEUS CONHECIMENTOS OBRIGADO PELA AULA BEM EXPLICADAS.
@tompas11A3n52KkX
3 жыл бұрын
Muito obrigado!
Cкажите,у меня имеется кг 5-7 бронзовой токарной стружки,есть ли смысл и толк пробовать вашим способом переплавить во фланей с нар ф 160,вн ф 100. Высота сколько выйдет. Или бронза из этой стружки будет шибко мягкой? На видео ваша бронза была визуально ну оч прям хорошего качества. оч плотная и без пор. Вы сыпали присадки?
@tompas11A3n52KkX
6 жыл бұрын
Я не могу по-русски, но я все равно попытаюсь ответит с помощью Google. Конечно, вы можете попытаться расплавить эти чипы Не думайте, что они будут мягче, чем сейчас. Я добавил немного буры в расплав. Благодарю вас за интерес. Это имело смысл? вы можете говорить по-английски?
Nice work!
@tompas11A3n52KkX
6 жыл бұрын
Thank you! Vielen Dank.
Daaaaamn, you really hobbed that worm wheel brah
@tompas11A3n52KkX
5 жыл бұрын
Thanks a lot.
Very good!
@tompas11A3n52KkX
7 жыл бұрын
Many thanks and thanks for watching too.
Brilliant !!!!!
@tompas11A3n52KkX
6 жыл бұрын
Thank you!
wow!!!!! beautiful
@tompas11A3n52KkX
7 жыл бұрын
Thank you sir.
@tahirhaciyev915
7 жыл бұрын
Salvatore Ferrarello
@tannguyenduy5946
6 жыл бұрын
,
لما هذه السرعة العالية في تفتيح الترس؟؟؟؟
Sir you inspire me 😀 I have a lathe and a mill and not much else including money lol My only problem was the cost of the melting as in the burner and fuel and something to melt the brass in. I had assumed that I would have needed to spend over£100 and more on burner parts refractory cement gas/fuel etc just to make only 20kg of brass and aluminium ingots. Do you think it would be worth me building a furnace? And how much do you think it would cost me to build? Ps I have a blower fan and plenty of steel containers/scrap. Gas tanks ready cut
@tompas11A3n52KkX
5 жыл бұрын
I'm glad that I inspired you. Would it be worth bulding a furnace? Yes! Because I don't live in your country it will be extremely difficult for me to answer your question about the cost. Anyway thanks for your comment and thanks for watching.
congratulations, interesting homemade tool. What material was made of?, tempered the material?, thank you.
@tompas11A3n52KkX
Жыл бұрын
I wish i know...
WOW - riktigt snyggt ju. Precisionsjobb. Speciellt spåren där och när man skär ut dom 1 efter 1 sådär (som man ser efter 9:00 i filmen). Jag såg ingen utmärkning på arbetsstycket i förväg, men det kanske fanns (för det räcker ju med några hundradels mm fel, om man gör samma fel på varje spår - så blir det ju bara skit av alltihop).
@tompas11A3n52KkX
7 жыл бұрын
Tack för att du tittade och kommenterade. Uppskattas! :) Meningen är att detta snäckhjul och snäckskruven ska ingå i drivningen av en kallsåg som jag håller på och konstruerar, men just nu går det lite trögt...
Was it difficult making a furnace that would melt brass? Assume you're powering with propane?
@tompas11A3n52KkX
7 жыл бұрын
Making the furnace for melting brass and alu was not that difficult. I used two metal tins and between them and in the bottom I used refractory cement and also on the lid. No I'm not using propane, I use a 50/50 mix of diesel and waste oil for the heating. Thanks for watching.
On the brass driven part why can't it be made of tougher metal as where i need a few made for a few mini tillers ? How much do you charge to make the brass gears ? Thanks for your time
@lovotcore6946
6 жыл бұрын
worm drives do a lot of rubbing, steel on steel would have galding problems where the two parts essentially try to friction weld together, brass on steel not so much, also the wheel has much more surface area than the worm, so it is best to minimize wear on the worm, brass won't wear out a steel worm very quickly.
looks like a Brown and sharp lead cam worm gear ...just saved around 350...500 $...if you were to make out of two pieces bolted together...for the higher end $ ..thats how company makes one to adjust for backlash
@tompas11A3n52KkX
Жыл бұрын
Thank you!
nice work!
@tompas11A3n52KkX
7 жыл бұрын
Thank you!
do you still have all your fingers ??pretty close to the tool...
@tompas11A3n52KkX
7 жыл бұрын
Yeah, I still got 10 fingers when I was counting them the other day. :) Thanks for watching.
art
@tompas11A3n52KkX
7 жыл бұрын
:) Thank you.
It’s a nice! :-)
@tompas11A3n52KkX
6 жыл бұрын
Thank you very much!
Nice! What is the purpose of the holes in the hob? :
@tompas11A3n52KkX
7 жыл бұрын
This part actually came from a cars towbar or is it called a trailer hitch. I'm not sure. In swedish it's called a "dragkrok" Anyway the holes have no purpose at all, they where there from start so to speak. Thanks for watching and comment. :)
@criticallook5162
7 жыл бұрын
tompas11 Ahhh, _re-purposing_ - no need to relegate it to the trash bin. Good for the pocketbook. :
@tompas11A3n52KkX
7 жыл бұрын
Yeah free metal is good metal. :) And this piece was also good quality steel and was after I had machined it hardened.
the question is where did you get a metal coffee can. their all plastic here.
@tompas11A3n52KkX
6 жыл бұрын
Yes nowadays they are plastic, but the one I used was old, from the sixties. I only got three left that is that big. (1 kg coffee) Thanks for watching.
отлично!!!
@tompas11A3n52KkX
6 жыл бұрын
большое спасибо!
جيد جدا
Snyggt!
@tompas11A3n52KkX
8 жыл бұрын
Tackar och tack för att du tittade. :)
Tiltrotator?
@tompas11A3n52KkX
Жыл бұрын
Maybe.
رائع ❤
@tompas11A3n52KkX
2 жыл бұрын
Sorry but I can't understand your language.
@user-sj6ub8gq5m
2 жыл бұрын
@@tompas11A3n52KkX wonderful
@tompas11A3n52KkX
2 жыл бұрын
@@user-sj6ub8gq5m Thank you
Gear box bandana hai address send?
@tompas11A3n52KkX
Жыл бұрын
Maybe...
govind varma technical Ingenyar VARKSOP
@tompas11A3n52KkX
Жыл бұрын
Mmm I do also think so.
Making the hob, showing the setup, would have made a great video, turning the blank was a ho hum, and BRASS instead of BRONZE
@tompas11A3n52KkX
5 жыл бұрын
Yes you got a point there. Thanks for watching.
a
@tompas11A3n52KkX
Жыл бұрын
b
Here you can see real globoid worm gear: @
@tompas11A3n52KkX
Жыл бұрын
No I can't.
@businesstourMV
Жыл бұрын
@@tompas11A3n52KkX BUSINESS TOUR
@tompas11A3n52KkX
Жыл бұрын
@@businesstourMV OK
Чорнову обробку не показав.
@tompas11A3n52KkX
Жыл бұрын
???
faltu work,,,,, parle full diben
@tompas11A3n52KkX
Жыл бұрын
Great!
The brass you melted and pour in the tin can is not the starting point of this build, because the billet you work with is bigger than the tin can. But the finish gear has maybe the same mass as the brass in the tin can, could you not use it and then melt it down? for so pretend that this was the start of the build, not the end? All the lying and pretending pisses me off!
@tompas11A3n52KkX
6 жыл бұрын
I can tell you that you are dead wrong. The brass I melted and poured in the old coffe can is actually the material i made the worm wheel from.