Nice job! Love that you through in some math to analyze the performance. 🤙

I've never seen a fire extinguisher with that large of an opening. Replace that silly little valve with a two inch ball valve and use a pneumatic actuator to open it and you will be blowing holes through car doors.

Hi ! Be very careful using compressed air doing anything ! The Schrader valve can actually be your death sentence ! 😢

@johnshipley1389

3 ай бұрын

High pressure injuries?!

@christopherfoster3744

3 ай бұрын

@@johnshipley1389 Hi ! Yes, It is just a piece of brass with a rubber o- ring that can shoot out like a bullet !

You've built the speargun from the Poor Man's James Bond. It was a large book from the 80's, showing lots of DIY "devices."

@Mika_357

10 ай бұрын

Sounds cool, definetly gonna try to get my hands on that book!

@yadjekim

10 ай бұрын

@@Mika_357 The Weaponeer is a more useful book, by the same guy, Kurt Saxon. Now days, having it will probably get you put on a list. 40yrs ago, it was a cool book of improvised devices. Anyway, stay safe!

Arc welding galvanized steel, like this pipe, damages your lungs with zinc oxide. This has to be done carefully.

very wise to not weld the tank. Simple but effective.

impressive, well done

Un gusto Amigo... Me gusta tu creatividad, sigue asi!!! Un abrazo desde URUGUAY

I thought the compressor was going to explode with so many pumps hahaha nice toy

You should use a fan when welding bro. That is some toxic smoke you're inhaling

Wife: honey when are you going to come in for dinner? Dude: soon as I’ve finished building and testing my fire extinguisher cannon I’m making for KZread….. wife: I think we need to have a talk

Nice build

@Mika_357

Жыл бұрын

Thank you! It was very fun!

I like that idea for a portable tire inflater. Fill it up . Throw it in the trunk.

Ótimo invenção

Get it to fire 10 mm Steel Bearings rather than Potato Wedges then you will be talking 👍

imagine what could you do with a compessor instead of a bike pump

@winstonchurchill6506

7 ай бұрын

seen one in the workshop doh

Doing a few changes you can power up upgrading the airflow

Yeah good

imagine getting shot by a 1kg metal rod going 70 mph

It sure sent that pipe a long way ! Did you get it back?

@Mika_357

Жыл бұрын

After a bit of searching in the long grass I eventually found it, yess!

Brother home many psi a fire extinguser can handle

Pumping it up with a bicycle pump was hilarious. At Harbor Freight you can get an electric tire pump for 10 dollars. will a golf ball fit in it?

@Mika_357

Жыл бұрын

I usually pump it up with my shop compressor which goes to about 9 bars. I only use the bicycle pump for pressurizing it to 13 bars afterwards, but even that sure is a good workout ;D. Whether a golfball will fit depends on the barrel you're using. But with the pipe I used it actually fits!

jetzt mit 150 bar und gezogenem lauf

👍🏽

You'd be able to shoot the rod extremely far is the barrel of the air cannon was only a little bigger then it

Идея хорошая

What about using a co2 extinguisher that's full.

Prática mente no dejo ber ni aprender nada todo lo hizo a la carrera

Pero si eres un niño, apenas un muchacho

How many psi did you pump it up to?

@Mika_357

Жыл бұрын

I did 13 Bars wich is around 190psi, this was the maximum I was comfortable with

@alotl1kevegas860

Жыл бұрын

@@Mika_357 Thanks for the quick reply. I'm building one of these out of a small oxygen tank from a cutting torch. It should handle 200psi with no problem, if yours held 190. Thanks again!

@Mika_357

Жыл бұрын

My pleasure! In my case I was concerned about the car tire valve, it was only Rates for 10 bar max.(145psi)

what your neighbors saying?

Get your head outta the fume path! 🚩🚑

valve is Tir valve??

@Mika_357

Жыл бұрын

Yup it‘s a Tire valve!

A grenade launcher perhaps

Valve is too small.. not dumping your tank fast enuff😢

Poxa caiu aqui no Paraná 😭

Are you german?

@Mika_357

Жыл бұрын

Yes, I am!🇩🇪

@perfektsusanno9579

Жыл бұрын

@@Mika_357 Haha same