"See how dirty it is" Holding out of the shot....

thanks now i can keep my dad race car track keep going for many more years

@TRXperienced

5 ай бұрын

Excellent! Thanks for watching!! Happy Racing and God Bless!!!

To clean the brushes and springs 100% clean and easier, roll the brushes on the sticky side of masking tape ends folded over to lay flat on a hard surface. Place the spring on an un-bent piece of a paper clip to roll it across the tape and dont forget to press the spring side of the brush on the tape as well. You can hold another piece of the piece of tape and press the arm side of the brush to the tape to clean that. If wanted you can drill just the right size hole to the exact depth needed in a piece of wood or something(pencil end eraser maybe?)even grab the brush with tweezers to place in the hole) to hold the brush instead of fingers to press the piece of tape to the brush. Something similar to hold the complete armature to clean the comm.

@TRXperienced

3 жыл бұрын

Awesome! Thanks for sharing and I will try your techniques!! Happy Racing!!!

Enjoyed your How to on the Tyco Chassis . I also Subbed you, Thanks Again

Yup thanks help to me been I’ve problem front stuck out both brush then I saw your video found it will fix try

Great video thanks for the help Mark

@TRXperienced

5 ай бұрын

Hi, thanks for watching! Happy Racing and God Bless!!!

great video I concured my first 440 rebuild including adding level 8 traction magnets

@TRXperienced

Жыл бұрын

Hi Kevin! Glad to hear that!! Happy Racing and God Bless!!!

That capacitor is to inhibit interference with radio and television signals. Not needed.

Tyco 440/440X2 are really easy once you have done it a few times. Narrow chassis is easier than the black wide chassis. Wide is more of a challenge removing and reinstalling the motor assembly. A lot more force to spread it enough. You'll think it's going to break but I have never broken one. I have a technique for every aspect of the process. Quick and easy.

@TRXperienced

Жыл бұрын

Hi Jeff! Thank You for watching and for your comments! Happy Racing and God Bless!!!

My tyco cars back wheels are spinning but the car is not moving very well on the track. Is it the tires?

@TRXperienced

11 ай бұрын

Hi, it sounds like your tires are old and dry! Try putting on a new set of silicone rear tires. That should improve it significantly!! Happy Racing and God Bless!!!