Make Your Rc Body Indestructible
Ойын-сауық
Donate To Great Ormond Street Hospital for Kids donate.gosh.org/
Get Your Merch Here! teespring.com/stores/kevs-merch
Join the BEST Community on the internet! - kevtalbot.clickfunnels.com/optin
My Main Channel - / @kevintalbottv
My Instagram - / talbotkev
My Facebook - / kevintalbotvideos
My Business Channel - / @kevtalbot5356
📕The Traits & Habits the Successful have - kevtalbot.clickfunnels.com/75...
Kev's 11 step eBay Blueprint (FULL Course) - kevin-talbot.teachable.com/p/...
Kev's RC Basher School - kevin-talbot.teachable.com/p/...
Banggood Stuff:
Desert Racers
WLtoys 12428 1/12 - Get it here: www.banggood.com/WLtoys-12428...
WLtoys 10428 1/10 - www.banggood.com/WLtoys-10428...
HBX Transit - Get it here: www.banggood.com/HBX-12895-11...
Crawler Wheels:
www.banggood.com/4PC-1_9-Inch...
www.banggood.com/4PC-1_9inch-...
www.banggood.com/4PCS-One-Pac...
Small RC's
Wltoys A959 - www.banggood.com/Wltoys-A959-...
HBX Rampage 18859E - www.banggood.com/HBX-18859E-R...
Wltoys A969 Rc Car 1/18 2.4Gh 4WD Short Course Truck www.banggood.com/Wltoys-A969-...
Big RC's
JLB Racing CHEETAH STD - www.banggood.com/JLB-Racing-C...
JLB Racing CHEETAH 120A - www.banggood.com/JLB-Racing-C...
ROVAN 1/5 Baja www.banggood.com/Rovan-Baja-1...
SERVOS
Power HD DW25LV Get Servo Here: www.banggood.com/Power-HD-DW2...
JX BLS-HV7032MG www.banggood.com/JX-BLS-HV703...
JX DC6015 DC Digital Servo www.banggood.com/JX-DC6015-DC...
Lipo
ZOP Power 11.1V 5000mAh 3S 60C Lipo Battery XT60 Plug www.banggood.com/ZOP-Power-11...
ZOP Power 14.8V 5000mah 50C 4S Lipo Battery www.banggood.com/ZOP-Power-14...
ZOP Power 14.8V 5000mAh 4S 60C Lipo Battery XT60 Plug www.banggood.com/ZOP-Power-14...
Пікірлер: 196
I kinda like how he acts so clumsy and throws stuff around; and then whenever he is working on something you can tell he's a good craftsman and a bit of a perfectionist. Those two things usually don't happen in the same person.
@dazofthemoo1531
9 ай бұрын
Yes. And a great bloke. Keeps it real. Nothing flashy or for show. Just a genuine good bloke. Heart of gold. Great role model. (My kids love Kev). A National Treasure.!
I’ve found that to get 60% of the body done in a few min is to run three long strips of drywall tape side by side straight down the middle from the front bumper to the rear bumper. Then all you have to work on is the sides. It also helps to use a hot glue gun to tack down areas that don’t wanna stick.
Hi Kevin, I just wanted you to know that I did use 3M spray adhesive instead of shoe glue, and it absolutely works. Two coats, and the body is so much tougher, and much less weight than shoe glue. I spray part of the car, then rub it in, then spray more, and rub that in. You can only rub it in for about 10 sec. then it gets too tacky. I put my fan blowing on it while using my heat gun to help dry it. After 5 minuets, I gave it the second coat. So much easier and quicker than smashing shoe glue into the drywall tape. I used my heat gun on every piece of drywall tape to help it mold and stick to the body. I did use hot glue if an end was coming lose. I've done two cars in two nights after work. The Rustler and the TRX 4X4. Still need to do another Rustler, E-Revo 2.0, MAXX, and then my new XMAXX. The next one I do I'll try to get it on my KZread page.
@Ltoxic13148
3 жыл бұрын
It's hold together well still?
@robertwren2289
3 жыл бұрын
@@Ltoxic13148, yes, I've even had them in the snow this winter, and it's holding up as if I just put it on. It's now on all my Trucks. it fixed a rip I had on my Rustler.
@adebisi1094
2 жыл бұрын
Drywall tape holds the body togeather after it has cracked. Shoegoo and tape doesn't prevent cracking.
All your vids r usually helpful kev. Even the ones that show us what not to do. Great job
Keep doing what you do Kevin. You owe them nothing 👍👍 Thanks for your channel by the way.
Love watching your RC videos! Honest car reviews! Entertaining Bashing! Wonderful RC Tips and tricks👍 Keep up the good work Kev👍👍👍
Great howto - thanks for taking the time to share the process, and I particularly enjoyed the fact that you show the challenging parts as opposed to a "clean" edit where it looks easy and simple. I would think that a spray adhesive such as 3M 77 or 90 applied to the body before the drywall tape would prevent it from lifting. I've never tried this exact process but have used it with very good results in other applications and it works very well.
@goforbroke2
3 жыл бұрын
That’s exactly what I just did, the 3M super 77 worked perfectly.
@kenjlee
2 жыл бұрын
Thanks bro I just happened to have both. Saved me $20 I was going to order 3M ribbon tapes just to save the hassle. Your idea was even easier to perform. Big thanks.
I did the same with my RC body shell. I applied the tape then applied a dot of super glue on the corners of the tape. Make the glueing process easy.
I use super 77 spray adhesive. Lay out your mesh drywall , a VERY light spay of the super 77, apply to inside of body, then apply your shoe-goo.
We use this process but usually after a crack or break develops and is best way I’ve found to repair. Something use gorilla tape. Tho works well but in racing we have to watch weigh but I can see for bashing protecting whole body is good ideal
@More Kevin Talbot thanks for the help and I’d really like to see you try again on the vinyl wrap again it was a good effort
Loved you comment on leeches and give and take.It's 100% true.
In more ways than one, an excellent 'waffle', thank you!
Glade I found this video watched a tons of your videos in the past but not all of them love that you try to inform RC users about the cheapest ways of doing things and it’s all in good fun that’s the thing we all need to remember about from time to time
Kev this was super motivational!
Doing good keep the video coming!!
I just got a body for my Traxxas Revo 3.3 and I’m going to be painting it and using this type of drywall tape to make the body firm and then instead of using sugar I think I’m going to use a two-part epoxy with a few lite coats.
Love the videos with your buddies and bashing the best 🍺❤️
when I ran Nitro I use to do this all the time and if I get a body I really like for my crawlers I do it to them as well]
Have you try to use bedliner inside the boddy? I dont know how its work, but nice if you maybe could make a video about that product? Love your videos by the way.
Did my maxx yesterday. Holly fumes. Gonna use gorilla construction adhesive clear in the future almost no smell and it comes in a calk gun like tube. Wish I would have done this like I did my big rock. Stinky maxx for weeks here we go.
You're awesome I love all your videos
Hello from SouthTexas love your channel regularly I love content. I’m Eric I’m a newbie at this I just bought an Arrma Kraton 4s blx what charger is decently with out breaking the bank. Thanks for your channel I’m learning little by little.Thanks
What about Barge Cement?... industrial shoe glue....it's what leather makers use making like gun holsters, saddles, shoes etc...it's extremely strong but not sure if lexan or polycarbonate bodys can take the chemical contact of the glue
Alternative supplies - Gorilla tape and Flex Seal spray.
@Greatgadgetsgear
3 жыл бұрын
How did the flex seal spray hold up?
@everythingispose-able2543
3 жыл бұрын
@@Greatgadgetsgear It works great for me. I have it on several bodies.
@Greatgadgetsgear
3 жыл бұрын
Thanks I’ll give it a shot. Right now I’m trying plasti dip rubber coating.
@everythingispose-able2543
3 жыл бұрын
@@Greatgadgetsgear That should work great if it adheres well. Or are you literally dipping the whole body, which would seal it all around.. ? That could work great... but would need decals or paint or you would have a plain solid color... which could be OK depending on the vehicle/purpose i guess...
@Greatgadgetsgear
3 жыл бұрын
Just spraying it in over the drywall mesh
@more Kevin talbot maybe try a sticky hairspray before the tape just a thought, love the content and thanks for the vids
Fiba tape an e6000 gr8 an e6000 cheaper glue very good and you can buy e6000 spray glue i use that lot quicker to apply just pop outside in garden an do there on sunny day an leave outside to dry
We used the same but with out the glue ..also used a air dryer to get it to mode better ...on our new rc wltoys 144010 we got today 07.11.23 that we seen on Claire's channel (TALBOT Tested & Approved!! Wltoys 144010) that u couldn't damaged it we used Gorilla tape and used air dyer to get in the cracks and corners plus ordered the DUMBO RC X6 Transmitter with three X6DC Receiver Gyro just getting back into rc after 40 plus years because of your channel and Claire's and one or two others that u hang out with
Could you use spray on glue, maybe a few coats over the dry wall tape, quick and easy?
@thatdudesme2
3 жыл бұрын
Contact adhesive is needed
use scotchcast. it is the bandage that is used for cast when you break a bone
How can I help people? I like that message that shows your true colors. Nice video thank you
There must be some sort of spray on rubber / foam that would be quick to apply and do a similar job.
@outcastfpv7655
6 ай бұрын
Water proofing stuff they use under tiles would probably work.
i feel like kevin can do some mean Mr.Bean faces
Line it with fiberglass (a small Bondo kit will line several bodies).
Im just having a go at this now. Looking for a brush to use…
Has anyone tried spray in truck bed liner? They aerosol kind you can get at the auto parts store. Seems it’d be a lottt easier to apply
@nathanielrose1014
2 жыл бұрын
Have you tried this yet? I have a few cans and just bought an x max with a cracked body and I want to try it.
Hi Kevin have u ever used that stuff flex seal to reinforce the nobody’s if so does it work good love your channel
Well kev just tried with the xmax tape not sticky enough I’ve ripped it all off n guna try it again tomorrow with the orange stuff supper sticky it says . I hope so 🤷🏼♂️👍🏻😎
You probably could use flex seal that would probably toughing it up
The biggest issue with doing this is the dirt that sticks to the inside of the body from all the drywall tape and shoe glue! That s*** does not come off!
I knew if anyone was going to cover this it would be the Time Lord Talbot.
I looked for that really sticky dry wall tape today. And after shopping all around I came out with white not sticky at all tape lol
Hi kev you have inspired me so much to make something of my life love your channels 👍
Is the brake cleaner for wax and grease remover if so windex with ammonia works great
Hi love the video
hi its Chris FROM LAS VEGAS any how im doing my shell right now as well but im using epoxy brushing over gorrilla tape its 2 part resin hardener mix its my first time trying this
How about the fans on the motor of the xmaxx having problems any fixes
Use gorilla tape its faster and works great. I've had the same body shell for years and bashed it quite a bit.
What happened…….. oh no Mr. bill 😂😂
That’s the best way I’ve found as well! I use a really thick layer where the shocks hit the front!
A friend of mine owns a Linex shop in Gresham,Oregon I will run that by him ... might be a bit heavy? So he said he has sprayed one added a lot of weight,I been using T Rex duct tape ... if you can't fix it duct it!
I spent the money and coated my xmaxx body in line-x truck bed liner. Forget the shoe goo and sheet rock tape.
@maikolrodriquez
4 жыл бұрын
How? it's only done professionally afaik. And my local supporting shops won't do it for any less than the price of a WHOLE truck bed.
@speedfreak8200
4 жыл бұрын
A friend of mine has a linex shop in north portland,or. I will run that idea past him,thx for tip
@Greatgadgetsgear
3 жыл бұрын
They sell spray cans of line x bed liner at auto parts stores and amazon.
@bagim948
2 жыл бұрын
@@Greatgadgetsgear I'm searching for LineX all over the internet but no avail. Can you kindly find me a link?
@Greatgadgetsgear
2 жыл бұрын
@@bagim948 Didn’t use line-x ask tow guy he did
Could you use fiberglass resin instead of shoe glue? Ty
Would this method work on a cardboard helmet? I am trying to make it a little bit stronger and dont want to use resin and fiberglass. The base would be cardboard, on the outside I would use what you call Bondo to make it smooth and i need something stronger on the inside. I tried paper mache and its just too much work, i tried fiberglass and its gets messy and at the end its to costly. I am searching all kind of methods
43:15 for the shoe goo application.
I would love to see the 8's conversion of the Maxx, I am curious about where to find the steel axles that will work with the wide Maxx kit.
Awesome work, how can i buy one of these in Australia, please let me know
Hey Kevin I have a question kind of off the subject of your video I have a Arma fireteam and I was wondering where you got your truck body from I'm dying to put something different on I love I love the RCA I just not a big fan of the guns in the guys please let me know
Will I hurt the X Maxx if I put the optional gearing in and leave it in
Oh man you making hard work of that 🤣🤣 e6000 spray glue lots quicker
Kev I am also doing this it’s awesome I broke my slash body in 16 pieces 2yrs ago and still now running same overkill body. I saw lots video and worst I saw was put lots of glue lmao mesh flot 1st try 1st bad. 2nd body I did it like you doing it and was amazing. However I decided try another way on a 3rd body both same product. Try it and maybe doing a video from it cuz so much easier and never saw one this way. So here it is : clean body than small sections at time Shoe Goo light amount 1st not need be perfect and wait 2-5min before you apply the mesh. Let dry all body and now this mesh is stuck to body and just perfect to apply Shoe Goo the amount you desire and won’t move or float. I do apply the 1st light glue with gloves so can feel just put enough to make mesh site on glue. Will help you with corners and faster process to apply it. Cheers
hi Kev..i done this but i destroy 2 bodies with shoeglue and its kind of reacting with the paint and the plastic...what im doing wrong ?
Would it be to excessive to put three-four layers of that tape
I have a 3d printer. It is a must have tool. You can print things and sell them. You will see that it makes a lot more profit. 70 pennys for a £20 part!
@princeofegypt4046
3 жыл бұрын
What model 3d printer are you using?
@VLena_art
3 жыл бұрын
@@princeofegypt4046 creality ender 3 of course. The most popular printer ever!😁
@VLena_art
3 жыл бұрын
@@princeofegypt4046 its 180 dollars, so that's why everyone has one. I don't recommend the anet 3d printers. They are fire hazards.
Someone really needs to make thin gauge metal RC bodies that dent. Maybe with easily replaceable body panels that simply attach with magnets
@schpreck
4 жыл бұрын
That happened several years ago, they where handmade and super expensive tho
@perspectivemeditation7648
3 жыл бұрын
@@schpreck strong magnets may interfere with the electronics, such as receiver, esc and maybe even brushless motor. not an expert, just a thought.
Probably should have asked this first lol but any chance the heat from the motor and esc will start the shell on fire with all that glue???
I scanned the comments.... didn't notice mention of it. He is using Fibatape brand drywall tape. I heard him say several times that he doesn't know. its literally printed in the cardboard roll, on the inside of the tape. I had to scan for both sides, but its clear it says fiba - tape.
3M spray adhesive JOB DONE IN 30 SECONDS
How many Milliliters is the shoe goo?
What the reinforced aluminium tape?
What about rip stop tape or the cloth very stick tape u tape up hocky sticks,bats clothe repair etc? Anyone tried this. I know u cant even tear it off sometimes even on like denim or a tent etc. this is a painstaking task but helpful task im sure. Just wondering.
Excellent advice on running a business!
That’s the wrong stuff to use if it’s coming of . Try fibre glass on the roll n then your sho goo 😎👍🏻🤙
I'm thinking of using epoxy on mine...I have about a gallon left over from a kitchen remodel...might add a bit of weight but epoxy is strong as hell.
@khalifazarulizwan5196
4 жыл бұрын
I think that will only make it brittle. You want it to have some flex to absorb impact.
@robanderson4137
4 жыл бұрын
@@khalifazarulizwan5196 epoxy isn't brittle it is hard but flexible...
@reneschmidt9367
4 жыл бұрын
Epoxy doesn’t bind to well to Lexan. :-(
Do this to my bodyshells for racing, makes a massive difference. Strengthens it, protects the paint and protects it from nitro fuel/oil
Kev don’t reach up and scratch your nose. Lol
I told my uncle about the website banggood he was like what kinda sex website is that banggood but then i showed him and now he keeps buying rc stuff from there lol
I’m building a stampede 4x4 and I’m putting a 6s in my stampede 4x4
how to you prevent the glue from making constantly lumps?
@giulianobertello84
2 жыл бұрын
I’m on my second body & shoe goo and it’s a nightmare to spread the glue without incurring into lumps and then it becomes a mess
What do you think of the Associate Pro 4 SC10 Short track truck?
@mikeschultz2108
2 жыл бұрын
It has a pretty strong body, but I still cracked mine eventually. Overall a great entry level truck though. Plenty of power, and handles good on the track.
RTV silicon gasket maker seer that on its under side
Word of advice: do *not* use Shoe Goo 2 as it does not stick to the body well, and dries much thicker, and is therefore much heavier than Shoe Goo 1. I did 2 whole bodies in Shoe Goo 2 and was able to peel them off in one piece. Shoe Goo 1 is also half the price of 2 if you buy the 110ml tubes. Also, do not mix Shoe Goo 1 and 2 on the same body as they do not stick to each other at all.
I used the drywall tape, and sprayed flexseal on it. Worked great, way quicker and easier than shoe goo. Maybe not quite as strong, but close.
@bostonkiter1010
4 жыл бұрын
How is that combo holding up ?! thanks
@earlmauger3961
4 жыл бұрын
@@bostonkiter1010 very well. It does Add a little way more than just the shoe goo and tape but the durability was a fair trade off. It's not like I'm doing speed runs with them or anything
@earlmauger3961
4 жыл бұрын
@@bostonkiter1010 If you wanna make it really durable at look a little better do the tape and shoe goo with a light Coat of flex seal
Have you tried spray adhesive?
What brand dry wall tape is that?
Nice
If you use a hot glue gun to do the joins the little bits won’t come loose 😄
I love the senton
Hi kelvin what tape is this?
what glue is you use?
I see a Hobbywing box😎
Go over the YIDAJIA ROCK CLIMBER
How much weight does the Shoe goo add?
what about carbon wrapping the whole interior🤨
Hey there is a 8x8 wltoys
The glue on the drywall tape is weak...I think I might want to hit the body with a spray adhesive before laying down the tape.
@afallenstar4u
4 жыл бұрын
You don't need to. The shoe goo locks it in through all the holes in the tape. I've been using it for 10 years and I've never had any of mine come back up. This is a super old trick that's been around for forever and works super well. Just do in a well ventilated area bc the shoe goo stinks and is harmful if you inhale to much of it and can burn your eyes as well. Also spray adhesive could keep it from sticking properly so I wouldn't waste my time on that.
How much does the weight increase with ?
why not just fiberglass the body?
Try a tooth brush to put in done
compare the 6 by 6