Make Your Paint Slick - Shine Armor Review | 1995 Ford F150
Автокөліктер мен көлік құралдары
Shine Armor reached out to me on Instagram and asked me to review their Graphene Ceramic Spray. This is my review/experience using the product.
#fordf150 #obsford #shinearmor
🚧 Links:
👉 amzn.to/3yOOlet
⏰ Time Stamps:
0:00 Intro
0:33 Paint before ceramic coat
1:14 Applying the ceramic coating
1:40 Dry for 1-2 minutes
1:50 Important info
2:01 Buff ceramic coat
2:38 Visual results
2:53 Slick test
3:21 Taped off section comparison
4:04 Conclusion
Welcome to The Minute Masters KZread Channel where I (Stevie) show you how to repair and upgrade all Ford F series trucks and Broncos from 1980-1997. So hit that subscribe button and be ready to resurrect your baby!🤙
🚨🚨🚨Want to wear cool Minute Masters merch click this link👇
minutemasters.bigcartel.com
🔥Subscribe here: / theminutemasters
Links to my favorite product producers:
- desolatemotorsports.com/
- www.bubbarope.com/
- donttellmywiferacing.bigcarte...
- www.bajahidretrofits.com/
- capritools.com/
The project is my 1995 Ford F150 XL 2wd 8 foot bed.
🛍 As an Amazon Associate I earn from qualifying purchases.
Пікірлер: 38
You know you hit the big time when a company sends you free product to try on your channel. Stay humble my friend.
@TheMinuteMasters
Жыл бұрын
That’s the plan! Thanks man! I will🤙
Hey Steve. Just bought a '95 F-150 XLT today and am realizing what a wealth of knowledge your channel will be for me. Have a good weekend man. I'll see ya around on KZread for sure.
@TheMinuteMasters
Жыл бұрын
Thanks Nick!🤙 I appreciate it. I’ll see ya in the comments some time then.
I really appreciate all the videos you make! I'm finally getting my truck back after being without it since October. There's still going to be some work to be done though. Hopefully I'll find what I need here 😅
@TheMinuteMasters
Жыл бұрын
You’re welcome man!🤙 Just in time for the warmer weather.
@BLueFeaTHeRedOliVeS
Жыл бұрын
@@TheMinuteMasters unfortunately I have to fix the issue I'm having with the A/C before it gets TOO warm 😂
@TheMinuteMasters
Жыл бұрын
@@BLueFeaTHeRedOliVeS Yup, do it while the weather is mild.
Just finished a ceramic coated long tube header install on my 95 4x4……it’s sweeeeeet
@TheMinuteMasters
Жыл бұрын
How’s that? That’s on my long term build list.
@greattribulation1388
Жыл бұрын
@@TheMinuteMasters I’ve never had headers go on that easily, perfect fit, they come with collector reducers and everything. I could feel a difference in the low end torque.
@TheMinuteMasters
Жыл бұрын
@@greattribulation1388 what brand are they?
@greattribulation1388
Жыл бұрын
@@TheMinuteMasters headman elite ceramic coated. Probably the best option. All the others I read about required frame or header “mods”
Good job Stevie good job
@TheMinuteMasters
Жыл бұрын
Thanks Francisco!🤙
Great video man, as always! Btw I have a question for you: I have a 1985 F150 with the 302 V8 EFI and for some reason it stalls while prolonged idling after reaching operating temperature and starts to surge like its not getting fuel after turning it off and starting it back up within 30 minutes. Any idea why? I've already replaced both front and rear fuel tanks and fuel pumps, the high pressure inline, changed the fuel filter, replaced the EGR, and changed the MAP sensor. I'm really stumped on this one and really need some help. The truck will drive perfectly fine from cold at highway speeds but I have to leave it turned off for 30 minutes at least before I drive it again or it'll start surging for fuel.
Hey where can I get quality bushings.
@TheMinuteMasters
Жыл бұрын
What bushings are you looking for?
Electric fans with low amp draw could be helpful
What is the paint color code on your truck? Thanks
@TheMinuteMasters
Жыл бұрын
JA - Bright Sapphire Metallic
@breezy_777
Жыл бұрын
Thank you! I’ve been looking for a truck this color anywhere online and couldn’t find one until yours
@TheMinuteMasters
Жыл бұрын
@@breezy_777 they’re hard to find because the color was only used in 1995.
@breezy_777
Жыл бұрын
@@TheMinuteMasters do you know buy chance how many were made total?
@TheMinuteMasters
Жыл бұрын
@@breezy_777 That’s a good question. I don’t know for sure, but I don’t think it was treated like a limited edition color. I think it’s just a color they tried for one year and then discontinued it.
The other parasitic draw that I have on my 97 Ranger 4x4 3.0v6 is the 4wd that I have only used a few times but I have been hauling all that 4x4 hardware around for over 26 yrs. Lol. If you want to save money on operating costs of a vehicle over a long period of time don't buy options you really don't need!
@TheMinuteMasters
Жыл бұрын
So basically don’t 4wd swap my truck?
@markcollins457
Жыл бұрын
@@TheMinuteMasters I purchased my truck new off the lot the end of 96 and a lot of expensive repairs have been on the 4x4 system that on the 97 model year(like mine) it was the last year for the twin traction beam front suspension on the Ranger. Lol just venting
@TheMinuteMasters
Жыл бұрын
@@markcollins457 I see! Lol What issues did you have?
That won't work on my paint. I need to repaint my truck. It's got one of those 10 foot paint jobs. It looks good 10 feet away but once you get close it looks like shit.
@TheMinuteMasters
Жыл бұрын
I’m with you! I might still try to buff the clearcoat that’s there to see if I can take some of those blemishes out. Summer project.
PLEASE HELP ME I HAVE A 95 F150 5.0 .. DO YOU KNOW WHERE THE MAP SENSOR IS ?
@TheMinuteMasters
Жыл бұрын
I’m could be wrong but the 95 F150 should have only a MAF sensor and not a MAP sensor.
@louisianaherb2803
Жыл бұрын
@@TheMinuteMasters I appreciate you sir.. can I cashapp you if i need help & info
@TheMinuteMasters
Жыл бұрын
@@louisianaherb2803 if you want to pay me, KZread has the “super thanks” option at the bottom of videos. If you want to message me directly, I use Instagram for that.
@louisianaherb2803
Жыл бұрын
@@TheMinuteMasters yes sir
Application error for sure
@TheMinuteMasters
Жыл бұрын
Ok, help me out. What’s the proper procedure? The directions were brief.