Hi Crystal. I'm just missing your videos. Hopefully everything is ok. God Bless ❤

@whooptyloopyacoop7903

Ай бұрын

Miss her videos too! Hope all is well 🙏

We have an embroidery business with 3 of the Ricoma CHS2-1508 machines and a few Melco and Ricoma single heads for customizations. We use 75/11 needles for basically everything including 3D puff hats. We also run our puff hats around 650 spm and slow down to 600 for smaller detail. If your hat is hooped correctly and your presser foot adjusted to the correct height, you should never have needle breaks. When you hoop your hats, make sure you’re pulling tension to get the panel as flat against the hooping station as possible before clamping it in. If done correctly, you don’t even need the clips for structured hats. Also, only use foam specifically made for 3D puff embroidery. Craft foam might be less expensive but if you’re hooping correctly and your digitizing is good and you’re still breaking needles, it’s your foam. Craft foam doesn’t break away as easy and is too dense. 90 needles should be reserved for thick leather like on saddles, etc…

Wow these hats came out amazing! 🤩

So much fun to watch - never knew how that was done! Thanks for another informative video!

@YouCanTotallyMakeThat

8 ай бұрын

Glad you enjoyed it!

I am just learning about machine embroidery so this was fascinating to me. Thanks CrystalAnn!

@YouCanTotallyMakeThat

8 ай бұрын

Glad it was helpful!

Yes, more videos please...I have a PE800 that I have yet to use for for over 1 year now...I will start by watching videos on this machine and go from there

@YouCanTotallyMakeThat

7 ай бұрын

You got it lots to come

Wow...I would love to own a machine like that...Goals!!

I would Iove to see more Embroidery videos! You do lovely work 👍

@YouCanTotallyMakeThat

8 ай бұрын

Thank you! Will do!

Awesome video. Thank you!!!

@YouCanTotallyMakeThat

8 ай бұрын

Glad you liked it!

SO cool!! I am definitely interested in an embroidery machine now

@YouCanTotallyMakeThat

8 ай бұрын

Yay! So happy to hear that 🎉

Do you have a craft room tour or a work space tour video? Id love to see your space ❤

Nice video, I need help to order a blink hat

Super cool ❤ the hats 🧢 came out awesome 🤩 love them. Thanks for teaching us love. Stay blessed bestie 🥰 p.s. I hope you didn’t hurt your eye at the end 🙏🏽

@YouCanTotallyMakeThat

8 ай бұрын

Thank you so much 🤗 I didn't thank goodness it was too funny not to share as well as a lesson learned ❤️

Love the video❤. Recently purchased the EM1010. Would love more videos. Thanks

@YouCanTotallyMakeThat

8 ай бұрын

Yay! How exciting what’s your favorite thing to embroider

Hi Crystal, I hope you can answer my question... I have a printer epson ecotank et-8550 and a heat press von Vevaro . I used Sublimation paper 120g of brand A-Sub . I tried printing on a polyester pillow and a polyester sweater but it doesn't work. the color don´t trasfer. I used a temperature of 350°F for 40 seconds. What is the Problem?

I like to see more videos like this ,I Just got the mt2001

Please do a video on doing an embroidery look patches without embroidery machine. Thanks

Thanx! I would love some tips on the density or stitch count for Puff style hats. I use a brother 6 needle and brother software so I may not be using the same term for Ricoma. But basically how thick should the stitch out be ??

@YouCanTotallyMakeThat

8 ай бұрын

I’m not to sure as I had someone digitize mine I’ll see what I can find out

Hi CrystalAnn: Love your videos especially on sublimation and Cricut. Are still doing videos on Design Bundles?

@YouCanTotallyMakeThat

7 ай бұрын

Thank you happy to hear that and I'm not at this time

Great video though I can’t afford that machine. Single needle video would be nice sometime.

Wow they look good. Where did you get the hats from? Thanks for always teaching us

@YouCanTotallyMakeThat

8 ай бұрын

The team had ordered them on amazon here is the link amzn.to/3QpVDgP

Are you ok I have not seen any new videos in months, hope you're ok, please let me know, ty

How do you change the numbers on the machine without going back into the digitizing software?

@YouCanTotallyMakeThat

8 ай бұрын

I will try and make a short on this soon stay tuned

You are great. I learned so much from you for such little time. I just bump into your vlog. I was about to purchase a 10 needle RICOMA embroidery machine, but too scared. I just purchased a Brother Luminaire XP2 embroidery machine last year for almost $20k. I have been garment sewing for almost 53 years but pretty new to embroidery. Is this a good brand? RICOMA? Thank you.

@YouCanTotallyMakeThat

7 ай бұрын

Yes it is and I love it that is awesome 53 years is amazing

Hi @YouCanTotallyMakeThat ❤ the video - where did you purchase the hats?

@YouCanTotallyMakeThat

7 ай бұрын

The team had them but you can get them on amazon amzn.to/40S2yEn

@Nickie0715

7 ай бұрын

@@YouCanTotallyMakeThat thank you

80/12 Titanium is enough. great video

@YouCanTotallyMakeThat

7 ай бұрын

It sure is!

hi crystal. thanks for ur awesome tips. CAN U PLS CLARIFY FEW DOUBTS - 1. is there any way to use any white or any colored htv vinyl, which is not specifically sublimation vinyl. Because i saw few very cheap heat tranfer vinyls (generally used for vinyl printing on t-shirts) but sublimation vinyls are way costlier.. 2. or can u find a way in which i can print on dark t shirts with sublimation but without the vinyl or any other super cheap way to save on margins while selling

@YouCanTotallyMakeThat

8 ай бұрын

I would invest in some poly T spray a little goes along way spray all your shirts as you get them in so they are ready to go. I get the 16oz this will give you the most natural sublimation look and feel www.dyepress.com/poly-t-plus-sublimation-coating-for-cotton-cotton-blends/

Thanks for sharing CrystalAnn

@YouCanTotallyMakeThat

8 ай бұрын

You are so welcome

Hi crystal hope all is well its so unlike you to ne gone this long please let us know you ok

Hey crystal any chance you can let us know who digitize for you?

@YouCanTotallyMakeThat

7 ай бұрын

I tried to use 3 different ones the one that finally got it right after back and forth was digitizing ninjas

Do you have to join to watch your videos???because I haven't seen you for over 5 months and you were going to come on the next day.

I dont have an embrodery machine but I love how it turned out.

@YouCanTotallyMakeThat

8 ай бұрын

Thank you glad you liked it ❤️

CrystalAnn are you alright? Send you a Hug and lifting you up before our Creator…

What is the name of the Machine Ma'am??

@YouCanTotallyMakeThat

8 ай бұрын

This one is the Ricoma MT 2001 8s

Are you aware that there's an incredible song with your name?

Is crystal OK I noticed she lost weight. I hope she is well miss her videos

Hi crystal, i am fan now ... thanks a lot for this video and ur parchment paper hack.. u r simply awesome.... I am repeating this question just to get ur attention, sorry but u are so cool 😊 Just few questions about parchment paper hack - 1. does this work on dark clothes too? Like on 100% pure cotton black color.. 2. does it produce t shirt prints durable enough to sell on amazon with good customer feedback. I mean does it fade or bleed after washing 40 or more times. If i use best sublimation ink and epson l1800 printer

@YouCanTotallyMakeThat

8 ай бұрын

Yes it's good enough to sell outlast wash after wash it does not work with darks you would need to layer it onto of white HTV