I love how you explain the steps and include why those steps are essential. You are a great teacher!

@ricomatv

6 жыл бұрын

Thank!

@json707

3 жыл бұрын

I agree he should be in all the videos ... very well spoken.

@creolepie

3 жыл бұрын

🎯

“The _________ Itself” 😂😂😂 homie is hella nervous. This is a great video itself. Rather informative. 👍🏾👍🏾

@katherinaroberts4859

4 жыл бұрын

Man YESSSS LOl

@natanyofsho

3 жыл бұрын

Itself itself itself!!!! Lol

@TheTonyDuxx

2 жыл бұрын

🤣🤣🤣🤣

@noelarios9410

2 жыл бұрын

Was jus thinking the same.

@THEDOPEGAME

Жыл бұрын

Essentially…

the ending part of using heat technique was really a nice thing to learn.THANK you

Awesome video. Gives me the confidence to try this out.

You did a great job. Thanks for the tips.

I love this! You just answered one of my personal life mysteries! Thank you! 💖

@ricomatv

Жыл бұрын

You're so welcome!

Thanks, you are good at explaining brother

All of my favorite hats have the puffed looked and have always loved the look and wondered how is was done. Recently I started hand embroidery to pass the time and wanted to see if I could ever accomplish that level of detail. This video is great and explains everything, I don't have a machine but now I understand the effect.

@ricomatv

3 жыл бұрын

Thanks for watching and for your great feedback!

@gusmartinez9454

Жыл бұрын

bzm IV mvo kb( m8😅 kvpobovb bcc66zxC😮😮

Just followed these simple instructions and it turned out fantastic!

@ricomatv

2 жыл бұрын

Great to hear!

Great work my friend. Efficiently explained and great editing.

@ricomatv

3 жыл бұрын

Thanks for watching!

Great lesson, 10x for sharing. I will do appreciate if you share your experience in digitizing for 3d puff embroidery? What should be the stitches density, do we need to put underlay, if yes which one is better - edge, parallel, zigzag... Thanks in advance...

You do a great job explaining the process. Thanks

Great job bro.

Wow! Amazing tutorial. You did a great job!

@ricomatv

Жыл бұрын

Thank you so much! We are so glad you liked it! Let us know if you have any other suggestions for videos :)

This video was really nice IT SELF !

Excellent. Very well explained. Thank you!

@ricomatv

2 жыл бұрын

Glad it was helpful!

Great Video, I can't wait to give puff embroidery a try!

@ricomatv

3 жыл бұрын

Make sure to post your creation on social media and tag us so we can see it!! Thanks for watching!

Excellent tutorial, thanks!

@ricomatv

3 жыл бұрын

Glad you enjoyed it!

Good explanation of the foam embroidery letters. Hard part is having the Puffy alphabet that is digitized for that type of embroidery.

@ricomatv

3 жыл бұрын

Agreed. Thanks for watching!

I absolutely luv this….God Bless you Guys

@ricomatv

Жыл бұрын

It was a pleasure! Let us know what else you would like to see.

very informative video thanx bro

you did a great job explaining thanks

@ricomatv

4 жыл бұрын

Thanks for watching!

Hi Manny! Just was I was looking for! Ty! 🤩

@ricomatv

3 жыл бұрын

SO happy it was helpful!

fantastic tutorial. thank you

@ricomatv

3 жыл бұрын

Glad it was helpful!

This is stunning!

@ricomatv

5 жыл бұрын

Thanks! Glad you like it.

I appreciate you guys so much! Thankyou for giving REAL tips and process in your vids. You guys are THE BOMB

@ricomatv

4 жыл бұрын

You're welcome!

Thank you for the video! How long does it take to make one cap as in the video?

Very Interesting, I have a brother now. I will be doing more research on the rooms brand. Thanks. I used a hair dryer on my puffy cap, worked well.

@ricomatv

6 жыл бұрын

A hair dryer is a great idea :) Make sure to visit our website to learn all about us: www.ricoma.us/ Let us know if you have any questions! Also if you haven't joined already, we'd love to have you in our facebook group "Embroidery and Custom Apparel Mastery" where you can join fellow embroiderers and share all your projects or ask any embroidery questions you may have: facebook.com/groups/embroiderymastery/

@suecollins3333

6 жыл бұрын

I understood that we have to use the puffy foam because the other does not work and is flameable. Is that not true

Mate this is the best, Thank You so much for doing this.

@ricomatv

2 жыл бұрын

Thanks for watching!

Very informative, thank you

@ricomatv

3 жыл бұрын

Glad it was helpful!

You are amazing and thanks for sharing ❤

@ricomatv

Жыл бұрын

You are so welcome! Thanks for watching!

actually, the video itself is essentially very cool. thanks a lot :)

@AndreaMarie123

5 жыл бұрын

Каори Но actually, you’re comment itself is essentially, the funniest! 😂😂

@11media46

4 жыл бұрын

hahaha

You rock, great video man

im not even a small business owner, but im fascinated by these machines

@ricomatv

4 жыл бұрын

If you're interested in learning more about our machines and how they can help you start your own business, contact our product specialists here -> Ricoma.com/us/contact-us

So... how do we digitize properly for design in Chroma? Or is Plus or Luxe required in order to do this?

Great video

Dope Video and very informative !!

@ricomatv

3 жыл бұрын

Glad you liked it! Make sure to subscribe to our channel to see more videos like this!

very good!

The Ligter to the Hat was tellem reallest clean’up technique by far!💯

nice thanks

I see puffy hats with much higher puff. I is there any difference than just the foam to create it?

I like the video and hoping to watch more cause am just a begner

Great video thank you

@ricomatv

3 жыл бұрын

Glad you enjoyed it!

We need a video on adjusting the presser foot ASAP, towards 3D Puff, before my MT arrive 😬 Thanks 👍🏽

@ricomatv

6 жыл бұрын

It's on the list of videos we are shooting. We'll move it up and hopefully have it in the next couple of weeks :)

@wilmercb

6 жыл бұрын

¡Esutpendo! Looking forward! 👍🏽

@wilmercb

6 жыл бұрын

Ricoma Embroidery Machines Any idea when the video on how to adjust the presser foot for cap embroidery would be ready? 😬👍🏼

how different would it look from the em1010 to the commercial vs?

Love this channel🙏🙏🙏

@ricomatv

2 жыл бұрын

We appreciate that!

Oh I did sign up to learn more but was asked what type of machine I have. i dont have a ricoma. I have a brother single needle right now. If I should get large, I will be looking to upgrade. So that's y I wanted to learn more on it.

@ricomatv

6 жыл бұрын

Sorry for the confusion, the machine selection is actually for you to select which machine you would like to see demonstrated.

thank you for your incredibly well done precise videos! i was wondering if you might be able to help me with ?'s on ricoma machines? if so i'd love to hear from you.

@ricomatv

3 жыл бұрын

Hi there, thanks so much for watching! You can ask all of your embroidery-related questions in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

Love this! Can you do 3D puff on a sweat shirt?

@ricomatv

6 жыл бұрын

Hi Michael, it would be the same process as embroidering 3D puff on a beanie, which we have a video on: kzread.info/dash/bejne/aICMuMuQkc_Zf7Q.html , but we will put your request on the list for future episodes!

Great video!

@ricomatv

5 ай бұрын

Glad you enjoyed it!

Wonderful... thanks for the information. What embroidery machine would you recommend, for someone now starting out doing custom hats? Thanks.

@ricomatv

4 жыл бұрын

Either our TC1501 or our MT 1501!

Thanks for the video. Can I use temporary adhesive spray instead of tape?

@ricomatv

4 жыл бұрын

Yes, absolutely!

Hi.nice way you explained.can we use craft foam.what size of needle and what type of thread (weight).

@ricomatv

4 жыл бұрын

Yes you can use craft foam for more tips on thread and needles, watch this video -> kzread.info/dash/bejne/iGWBlMGafMS0h8Y.html

Great video - does it matter what .MM puffy foam you use? I see that it comes in 2mm, 3mm and larger?

@ricomatv

4 жыл бұрын

It simply depends on how pronounced you want the effect to be. All are fine.

@manny- How do i aadjust the presser foot to the height of the foam?

@ricomatv

6 жыл бұрын

Hi, we are going to be making a video on this subject in the coming weeks. In the meantime if you own a Ricoma feel free to call support and have a tech walk you through the process: www.ricoma.us/tech-support

Awesome vid! I am having a hard time. How thick is the foam that you’re using? I have 2mm and I think it’s too thin .

@ricomatv

4 жыл бұрын

3mm foam is the best option!

I want to see if you guys can do a video doing embroidery on the side and the back of the hat please I’m looking to buy the MT1502.

@ricomatv

4 жыл бұрын

Hello we have some videos on this kzread.info/dash/bejne/a2aWzquugqq8lLQ.html kzread.info/dash/bejne/dmSqmNiudqfVh8o.html Hope it helps

im looking for a embroidery machines for shoes, shirts (hoodies), hats and patches (puffy, 3d, chenille style and normal), can u tell me a few good machines i should google for? thx

Sub to your channel...love this bro!

Did the presser foot high was adjusted after the blue thread before you do the 3d foam? How to adjust the presser foot? Great video.

@ricomatv

4 жыл бұрын

Reach out to our support team to learn how to adjust the presser foot.ricoma.com/US/contact-us

thanks

@ricomatv

2 жыл бұрын

You're welcome!

Thanks!

@ricomatv

Жыл бұрын

You bet! Thanks for watching :)

Utilise, itself, essentially, basically, themselves

Amazing video. What machine would you recommend for hat embroidery? Nothing huge but a normal standard machine would be preferred. Cheers

@ricomatv

2 жыл бұрын

Hello! For our starting embroidery machine we recommend you looking into our EM-1010. Check it out below! ricoma.com/US/machine/em-1010

You are amazing good job

@ricomatv

3 жыл бұрын

Thank you so much 😀

Getting me em1010 next week. Can't wait

@ricomatv

11 ай бұрын

How exciting! Make sure to join our Ricoma Connect group > facebook.com/groups/RicomaConnect

Does the Ricoma EM-1010 do the 3D stitch? If not, what machine model can accomplish it? Looking around to buy a embroidery machine.

@ricomatv

6 жыл бұрын

Hi Dawna, the EM-1010 is able to do 3D embroidery. If you are looking to do 3D embroidery as a business we recommend our 1501-TC or MT-1501 as they are our commercial machines and are equipped with bigger motors and can handle larger orders. Our EM-1010 is more of a hobbyist machine, so if that is what you're looking for then it will get the job done. If you'd like to find out more about our machines fill out the form on the following page and someone will gladly answer all of your questions: www.ricoma.us/contactus

Type of needle?

Very nice Good Teacher .. But pls what is the thickness of the foam

@ricomatv

4 жыл бұрын

Check description!

I’ve learned burning from inside the cap is better to avoid burning the front

@ricomatv

3 ай бұрын

Hi! Thank you for sharing this with us. Both methods have their advantages, and the choice depends on various factors including the material you're embroidering on, the design complexity, and personal preference.

it would be cool if you guys show the process on the digitize process

@ricomatv

3 жыл бұрын

There are some videos on that here: kzread.info/dash/bejne/iGWBlMGafMS0h8Y.html

I lake work in the machine the embroidery I love

What kind of stich do you useon foam?satin stich or fill stich?

@ricomatv

6 жыл бұрын

Satin :)

You explain everything in detail. However, the items you embroidered are caps. You’ve encouraged me to make a purchase of an industrial embroidery machine.

@ricomatv

5 жыл бұрын

Glad to hear that. Reach out to us if you want more information on our machines. www.ricoma.us/contactus

Question, what if you are doing a business logo on a cap that has 3 different colors? The how would you go about matching the foam color for that? If that makes sense, thank you!

@ricomatv

3 жыл бұрын

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

Si hablas espanol also tambien en espanol I love embroider machines this logo is pretty

I’ve also seen two different depths of foam; a thinner version and a thicker version. Which do you use?

@ricomatv

Жыл бұрын

Hi Carole, we used the regular foam that we purchased from Walmart.

Looks great. Is it a special foam or is it craft foam that you can get at Michael’s?

@ricomatv

3 жыл бұрын

Nope just regular foam from Joan Fabrics!

how thick do you do the layer (satin below the puff)?

@ricomatv

6 жыл бұрын

Hello MK Buddy, great question. You want to have to satin below the puff overlap where the puff will be about 15%-20% to avoid gaps between the puff and the regular satin stitch underneath because the thread contracts when stitched. Hope this answers your question.

Is there any other adjustments that need to be done? I am having thread breaks only when using 3mm foam on a structured cap and 80/12 needle .... should I Do something different with tension?

@ricomatv

4 жыл бұрын

We suggest to switch out the needle to 75/11. Sometimes a thick needles is not good when running so many layers!

I there a difference in the foam one would purchase at Michael’s or Hobby Lobby than the foam used for embroidery?

@ricomatv

Жыл бұрын

No difference, you can even get it from Walmart.

Hello, is there an additional step to set this up to tell the machine that this is a 3D design? Would love to see a video from start to finish on this type of design. Thanks so much.

@ricomatv

7 ай бұрын

Hi there! Take a look at this tutorial > kzread.info/dash/bejne/lYujtsipg5DLaKQ.htmlsi=y5-F_RIhf47jr8NP

I have the TC. Do I need to mess with tension when adding the foam?

@ricomatv

5 ай бұрын

Not really, but if you’re not getting good results, slightly looser tension gives better results on puff. But wouldn’t mess with it if no issues

I'm get learning to much Puff and embroidery logo

@ricomatv

Жыл бұрын

We are so happy to hear that!

Are there any adjustments that need to be made for the needles?

@ricomatv

Жыл бұрын

You can use a regular 75/11 needle! It totally depends on the detail you want to create or a specific cap you want to do.

My em1010 rubs on my snapback hat brim and also bends them could u guys do a video how to do SnapBack hats on a em1010 I’ve been trying and trying on snapbacks flex fit classic hats

@ricomatv

2 жыл бұрын

Hi there, thanks so much for watching. Yes, i will pass this suggestion on to our video team!

I liked the video itself

Can you do 3D puff on the Ricoma EM-1010? Or do you need one or the bigger machine?

@ricomatv

3 жыл бұрын

3D puff can definitely be done on the EM-1010

What is the recommended speed to run a puff hat on a mt1502?

@ricomatv

5 жыл бұрын

Hi Eric, we recommend running caps at 500-600 SPM.

Where do you buy your caps? They look really good quality.

@ricomatv

4 жыл бұрын

Hello we mostly use otto caps. Here is their site ottocap.com/

Many what needles are you using?

@ricomatv

6 жыл бұрын

In this video since we were embroidering on structured hats we used 80/12, which is the recommended needle for structured hats.

itself is cool

I see 2 different ricoma logos on different machines. Is there a difference. I want to purchase one, but am confused as to why a brand would have 2 logos for the same product. An explanation would be very helpful please...

@ricomatv

4 жыл бұрын

The only way to purchase a Ricoma machine is buy purchasing through our sales team. you can contact us at ricoma.com/us/contact-us

Quick question, when u embroider a cap like that will it destroy the "Buckram" of the Crowd of the cap?

@ricomatv

2 жыл бұрын

No, it won't!

What needle size should I be using? Mine keeps breaking I can’t figure out what I’m doing wrong

@ricomatv

5 ай бұрын

Hi Emma! We recommend using a 75/11 needle. Also, consider checking out our blog where we discuss 3D Puff >info.ricoma.com/blog/how-to-do-3d-puff-embroidery-on-caps

You should rename this video to “essentially itself” since those are the words of the day apparently, or should I say “essentially”

What style and or name brand hats do you find to be the best for this type of application

@ricomatv

2 жыл бұрын

Hi there, thanks so much for watching. We recommend using structured hats for 3D puff embroidery.

@8ntnun

2 жыл бұрын

@@ricomatv yes I know structured but what name brand do you prefer???🧐🧐🧐

What size puff foam you guys recommend for hats?

@ricomatv

2 жыл бұрын

HI there, thanks so much for watching. We suggest the following: - Matching the foam color to your thread. - Using 80/12 needles which work best for cutting into the foam without leaving extra poking out. - Matching foam thickness to the width of the stitches you are working with. If you are embroidering with a thick layer of 3d foam (typically 2 to 3 millimeters), consider raising your presser foot to 1.5 to 2 millimeters to accommodate for this extra layer.

Essentially, its about the depth itself, actually.

@ricomatv

2 жыл бұрын

Thank you for watching, Jake!

Can your EM-1010 machine do the 3D puff embroidery?

@ricomatv

4 жыл бұрын

Yes it can :)