Make double bass smaller.#4 Sold!
Музыка
Full version → • Make double bass small...
There are many ways to make a double bass smaller.
There are instruments that have a smaller body while maintaining the scale and other features of the double bass.
A famous example is YAMAHA's Silent Bass SLB. I like this instrument.
The concept of my bass is different from that of the SLB.
However, I want to produce a similar sound, or even more distinctive sound.
As with guitars, scale affects sound and playability. It's a matter of course.
This instrument, No. 3, is made at 34 inches (864mm), the same as JazzBass and other instruments.
A new challenge in the concept was to be able to play it with a bowed bullet.
Sorry, it is not shown in the video, but all strings can be sounded with the bow.
The pitch between strings at the bridge is about the same as a double bass.
But the neck and nut width is 42mm, which is about the same width as a regular electric bass.
This is why the fingerboard end looks extremely wide.
The neck is extremely thick. It is incomparably thicker than an electric bass.
If you usually play double bass, you should have no problem with it.
If you usually play electric bass, you need to get used to it. Please bear with it.
No truss rod is included.
The strings are double bass strings.
Piezo pickups are susceptible to noise, so I focused on arcing and shielding.
The control box made of striped ebony was fully shielded with copper foil.
The pickups are wired with shielded wires.
Aluminum rods are embedded in the 4-string groove of the bridge to connect the ground to the strings.
Furthermore, a metal plate was embedded in the head to energize all the pegs and connect the ground to all the strings.
The last aluminum plate is used to stop the shoulder-like part that touches the body when the bass is played upright.
It is quite stable.
The body and neck are painted with oil finish.
This is one of my favorite painting methods.
It is my preference, but I try to keep the paint so glossy that it does not look like an oil finish.
I asked drummer and bassist Hinata to play it.
"It gives it a thicker bass sound."
"It has a much more double bass feel."
"It feels good to sit down and play the bass upright."
I received comments such as. Thank you very much.
player / ohisama14
There were only a few difficult tasks in making the third model.
But there were countless painful tasks.
If I can say that the instrument was finished to my ideal, I would say no.
It was a design and production process that made me realize my immaturity without limit.
I am so frustrated.
However, I think it is the closest instrument to my idea of a good bass sound and my ideal beauty.
Thank you very much.
Andy bass&guitar Koki andy Adachi
#1 • I need to shrink doubl...
#2 • I need to shrink doubl...
#3 • I want make double bas...
Parts and tools used
TONE Power Grip Driver Set PLPGD6
amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#Andy_bass_and_guitar
#Restoration
#ASMR
Пікірлер: 78
The bass: Marvelous! Superb! A work of art! The maker: Artist! Genius! Mad scientist!
@Andybassguitar
Жыл бұрын
Thank you!
すげー!思ってた事をしてる方がいた ウッドベースをもっと小さくプレイし易くなればプレイヤーも少しは増えんじゃって思ってた! 素敵です!
@Andybassguitar
Жыл бұрын
ありがとうございます!
WOW!! beautiful work. beautiful sound! Hats off to you. Thank you for sharing that.
@Andybassguitar
Жыл бұрын
Thank you!
Simply stunning! Amazing craftsmanship and design. And it sounds great, too!
这个琴做的时间周期很长哇!但是制作很精致,像工艺品哇!!!希望你更新更多的视频
Wow!!! Great job!!!
@Andybassguitar
Жыл бұрын
Thank you!
Well done, Andy.
@Andybassguitar
Жыл бұрын
Thank you !
THAT is one beautiful work of art!
@Andybassguitar
Жыл бұрын
Thank you!
As usual amazing Andy, when it comes to "attention to detail " your the best 👌 👍
@Andybassguitar
Жыл бұрын
Thank you!
Really excellent craftmanship with much love for the details!!
@Andybassguitar
Жыл бұрын
Thank you !
アンディ賞のおかげでrefretをうまく終えることができました。 一人でリフレットした後、楽器に行ってギターを点検しました。 アルバイトをしてみると思わないかと言って嬉しかったです。 いつも良い映像ありがとうございます。
@Andybassguitar
Жыл бұрын
Thank you!
Beautiful work congratulations
これは思っていたより芸術的で 素晴らしいとしか言いようがない まさか 途中製作していたものが胸当て(?)とは! ベーシストの演奏も最高でした(もっと聞きたい) これで まだまだと言っているAndyさんに脱帽
@Andybassguitar
Жыл бұрын
ありがとうございます。 僕もアルミの板切ってる時に僕は今何を作っているのだろう・・・と不安になりました! 精進いたします。
Good Job !!!
@Andybassguitar
Жыл бұрын
Thank you!
I think that wood it's still young. It need time 5-6 years for improve tone and color of sound. You really did a great job 👍🏻♥️
That is impressive. The gentleman is labor intensive and does remarkable work! All that hand work...again... very impressive...and beautiful!
I'm impressed
@Andybassguitar
Жыл бұрын
Thank you!
what a talent!,,Thank you!
@Andybassguitar
Жыл бұрын
Thank you!
Fantastic work! It’s’ a beautiful mini bass, Isn’t i? And so nice sound it made!
@Andybassguitar
Жыл бұрын
Thank you!
Diferent and very good.
@Andybassguitar
Жыл бұрын
Thank you!
very cool.
@Andybassguitar
Жыл бұрын
Thank you!
とても素晴らしい!!! 天才じゃないか?
@Andybassguitar
Жыл бұрын
ありがとうございます!
Espectacular.
@Andybassguitar
Жыл бұрын
Thank you!
Круто брат ! Ты сделал его . Поздравляю !!!!
すばらしい!
@Andybassguitar
Жыл бұрын
ありがとうございます!
Absolutely beautiful and your eye for detail and your patience for perfection is unreal a very talented young man
@Andybassguitar
Жыл бұрын
Thank you!
まじですげー
@Andybassguitar
Жыл бұрын
まじあざすー
Reminds me of the Ampeg Baby Bass.
@Andybassguitar
Жыл бұрын
That's one of the similar Bass!
Gorgeous and beautiful work! If I were to purchase such an instrument, I would ask you to change the distance between the strings on the bridge and make them closer to one another. This is just a personal preference, and I don't know it it would suit you or the bass.
@Andybassguitar
Жыл бұрын
Thank you!
Super cool. Do you consider make a neck through body?
@Andybassguitar
Жыл бұрын
Thank you ! I'm not thinking about a through neck. Next time I will change the structure drastically.
Very nice, great work. You should make a guitar.
@Andybassguitar
Жыл бұрын
Thank you!
🏆🙌
Alembic would ask 50.000$ as minimum for that…
@Andybassguitar
Жыл бұрын
It will be about that price.
Hey Andy, what's the model of that drill press?
@Andybassguitar
Жыл бұрын
It is a PROXXON milling machine. Probably.
Супер.
@Andybassguitar
Жыл бұрын
Thank you!
Do you still make these ? Would love to get one ? What is the scale length ?
@Andybassguitar
3 ай бұрын
完売してしまいました。 スケールの長さはジャズベースなどと同じです。
How do o order one?
関係ないことですみません。テレキャスターのリフィニッシュって動画にする予定ありませんか?ボディ横の塗装剥がしで木を削っちゃいそうなので、参考にしたいです…
@Andybassguitar
Жыл бұрын
予定はありません。 木目に逆らわないように温めながらゆっくりやってみてください。
@user-fb4pu2mx8k
Жыл бұрын
@@Andybassguitar ありがとうございます!
How much is it?
这个玫瑰木指板制作有点浪费了材料,我觉得可以切割后,在制作。
Nice, but needs amplification.
@Andybassguitar
Жыл бұрын
Thank you!
Uau…
You can't make a stand up bass with a tall setup and call it a double bass "made smaller". A double bass is called that for a reason. That reason is not just because it is played vertically while standing next to it.
@skateify31
Жыл бұрын
please, enlighten us
@Andybassguitar
Жыл бұрын
It is the headline. Thankyou!
@NigelTufnel612
Жыл бұрын
100 percent wrong-that is not the reason it is called a double bass (or contrabass, string bass, bass viol, etc.)