Cool

Very cool project whats the range with the antenna? thks for showing jour skills,

@Inventorsidea

29 күн бұрын

Hello buddy Have a good time and happiness Thanks for watching the video till the end. In answer to your question, I must say that I do not know the range of the antenna! That is, by using different antennas, the range also changes. By using better and stronger antennas, its range will also increase.😉

Sir can you show me where you solder the wire, we have the same board but I don't know where to solder it

@Inventorsidea

7 күн бұрын

Hello buddy Have a good time and happiness I'm really sorry it's not clear in the video. Right in front of the esp8266 housing, you can see the golden lines, which are the internal (or on-board) antenna. I soldered the wire to the antenna on the board. 😉

Hello! I'm trying to understand where on the board you soldered the antenna wire.

@Inventorsidea

22 күн бұрын

Hello buddy Have a good time and happiness I am glad you asked this question. These types of boards include 3 types of antennas. The first type of surface antenna that has a shiny copper layer on the board. The second type is an sma socket for connecting different types of antennas. And the third type has both of these antennas. This board has a surface antenna, which is drawn as a shiny copper layer on the board. I soldered because there was no sma socket on the board 😉

@ricardoramos7789

22 күн бұрын

@@Inventorsidea Got it.... As far as I know, this Nodemcu has an antenna already integrated into the board, and this limits it when finding distant wireless networks. And this scheme for soldering an external antenna, I confess that I didn't know about this trick. I thought that when soldering the external antenna, it would damage the Nodemcu board. Very interesting indeed. When it shows the welding of the antenna, the image is a little bad and there is a small cut in the video, so I tried to understand this scheme.

@WebsterMitaran

9 күн бұрын

​@@Inventorsideabro can we put an sma adapter on the board?

@Inventorsidea

8 күн бұрын

Hello buddy Have a good time and happiness It's a good idea, but you shouldn't use the sma adapter. It is better to use small connectors like UFL, which are better and easier to solder and are also suitable for these boards. 😉

@WebsterMitaran

8 күн бұрын

@Inventorsidea thank you very much brother can I used the antenna of our old router and can I attach two only just one brother??

Please give me the link to buy that esp8266 box

@Inventorsidea

29 күн бұрын

Hello buddy Have a good time and happiness This esp8266 box was printed with a 3D printer, and I put the 3D file link in the description.😉

can you create a deauther that can deauth 5g?

@Inventorsidea

2 ай бұрын

Hello buddy Have a good time and happiness If you mean WIFI 5GHz, yes, you can do the same by upgrading this device. And if you mean the 5G network, I must say that this issue is a bit complicated. And for some reasons, it is considered a jammer, and it also cuts off people's access to emergency numbers, and it is considered a crime. But the circuit of this jammer network is 5G on the Internet, which has an educational aspect and a low range.

I need a .bin for an esp32 c3 super mini

@Inventorsidea

Ай бұрын

Hello buddy Have a good time and happiness Thank you for watching the video till the end. Using the following site, you can download the appropriate file for your board. And if you have a problem, tell me so that we can solve it together.😉😉 deauther.com/docs/download

@Danmaxlara

Ай бұрын

@@Inventorsidea hi, friend. I don't have that board, I only have esp32 c3 super mini and esp32 s3 zero. I see that it is not compatible

@Inventorsidea

Ай бұрын

Hello buddy Have a good time and happiness I had not paid attention to this point. You are right and I must say that this code works on esp8266 boards and has better performance 😉