Flew the DC-10 at UAL for 15 years. Loved the plane. Flew all three seats and became n APD eventually. Miss the plane. Beautiful example of an RC jet. Incredible actually. I would love to see it fly up close

Love this!!!! As a retired Air Force Crew Chief that spent his last 15 years working on the KC-10A I love the RC Model!!! The only thing missing is the Center Main Landing Gear for whenever heavy weight cargo is on board. It would have been a nice touch for this aircraft.

Unbelievable piece of artwork and craftsmanship...and flying skill. The harmonic howl and engine whine is so realistic on slow flyby.!!

WOW!!!

United Parcel Smashers Great model.

@Thercgeek

Жыл бұрын

🤣🤣

@Jesusistheonlyway86

Жыл бұрын

@@Thercgeek Hey hows the b58 goin?

@Thercgeek

Жыл бұрын

Looks like the next attempt will be in a couple weeks. The airplanes good to go again. 😊

These guys did an exceptional job pairing fans to the airplane. At first I thought it was going to have a low blade count scream, but it sounded phenomenal. That pull up vertical reminded me of the story of the FEDEX attempted highjacking. All around, great flying and scale handling.

Looks like the crosswind was fun on landing like the real one 😅

@lw216316

Жыл бұрын

I wondered about that - did not see any indications of wind strong enough to move the plane around like that - did not see trees swaying, the smoke (steam?) from the nearby stacks was pretty much straight up...maybe the approach to the runway was not long enough or had trees so he came in at an angle ?

@Thercgeek

Жыл бұрын

There definitely was a crosswind. It wasn’t huge, but the model felt it more than I would have thought based on what I recall. Some models are just more susceptible to cross winds thanks others. My A-7 comes to mind, it hates crosswinds. 😆

@victorrcjets7660

Жыл бұрын

@@lw216316 boys got a good sound muffler. But you could even tell by the turn after landing. The airliner had a really heavy yaw before reaching ground effect.

Boy o Boy, that was a beauty!!!

yep ! 😎 Thanks for sharing 👍

Wow, awesome crosswinds landing.

WOW it looks so real !!! Awesome !!!

Flies better than the real one did

@Thercgeek

Жыл бұрын

Haha, nice! 😆

What a fantastic model and great video work. I agree with Victor, that side slip on landing was epic! Thanks for bringing this one to us. Happy Independence Day to you and your family my friend 😎🇺🇸👍

@Thercgeek

Жыл бұрын

Many thanks brother!

Cool video Chris, that landing was spectacular!! 🇺🇲🎇🇺🇲🎇

That's a beautiful model so realistic right up to the front wing working extentions working with flaps . I'm waiting for the day with operational thrust reversals 😊

Beautiful control on that landing

Make another one with bay doors to drop 5 gallons of water

Phenomenal work and craftsmanship. Great job on the flying also!

Nice cross-wind landing..

Great landing!

Fantastic plane ! Great landing 😎

Absolutely amazing. The quality of the build as well as the flying expertise. Well done !

Just beautifull ! Always loved the DC-10 best wishes from Wales .

Excellent model! Never seeing a UPS DC 10 but looks great

Wow, beautiful plane, beautiful flight and beautiful landing. The DC-10was a beautiful plane, in 1982 I flew in one of them, super spacious inside. I know It had maintenance problems, mainly in the tail turbine…

Very impressive DC-10F electric powered in UPS marking. Nice flight. My dad was one of test flight pilot on DC-10, still my favorite plane & looks. Too bad to keep flying passengers.

Probably has the emergency slides too the detail is very impressive

NIIIIIIIIICE! What can brown do for you! 😉👍

Wow. You never see slats on RC planes. Excellent work.

@dont6441

Жыл бұрын

Not exactly. The AF Model T-45 has them.

Just Beautiful!! Looks to be powered perfectly as well. The only thing that could make it better would be if it were a L-1011. Lol ha ha...

Great looking scale model. Impressive work on the cross control! Camera crew does a great job also! Wondering if my missing UPS package is in there???😂

@Thercgeek

Жыл бұрын

Could be! 🤣

Amazing model. Has the dreaded hair dryer sound.

@Thercgeek

Жыл бұрын

Haha, yeah has some old school 4blade schubeler fans.

Dang looks like a duck coming in for a landing. Beautiful large scale RC plane✌️

Lands about like the real thing

@Thercgeek

Жыл бұрын

Well, I can’t take credit for flying it, just filming. 😊

@Captndarty

Жыл бұрын

@@ThercgeekTwas a fine landing for an RC jet in the wind

What a cool video, and a really nice jet. Is that a camera on top of the tail nacelle in some of the shots? I bet that would be some great video, too.

@Thercgeek

Жыл бұрын

It was, yeah. 😊

Velocidad máxima de vuelo

@Thercgeek

Жыл бұрын

I’m not sure. He never flew a pass at full throttle/speed

where do i buy it, i love the dc 10! and is there a smaller one if that big one isnt available to get

Where's the third "wheel" in the middle wings ? ^^

Can. This fly at 50% power? That would be perfect scale speed.

Is that three EDFs or is the vertical tail nacelle only astatic?

@Thercgeek

Жыл бұрын

It was a twin with fans in the wing nacelles. The tail nacelle was just an open flow through tube essentially.

Does it lose its engines like in real life?

No wonder my parcels are all bashed and parts broken with that landing! Nice aircraft though!

@Thercgeek

Жыл бұрын

Haha, must be it! 😆

This video should have 0 dislikes... right?

@Thercgeek

10 ай бұрын

You might think so 😆

Gorgeous build and beautiful flight and landing. The spoilers and slats are phenomenal but don’t make up for the outdated motors. The sound really detracted from the overall experience. Thanks for sharing this Chris.

Hi where can I get the kit?

curious if the slats are beneficial at these Rns?

@Thercgeek

Жыл бұрын

Actually, they do help. While the gap is probably too small to be effective, you’re still getting an increase in wing area from the extension of it.

@mithrandir1313

Жыл бұрын

@@Thercgeek more camber too

Any build or internal specs/details anywhere???

@Thercgeek

2 ай бұрын

All the info I have is are the specs that I outlined in the description that I got from the builder/pilot.

Can this plane ship my golf clubs from San Diego to Kentucky? If so, how much would it cost ☺

@Thercgeek

Жыл бұрын

I think so! 😆

I wonder if the Model has all Defects the actual Plane has? To represent the real thing, the Model needs Cargo Doors that fall off, Engines that explode/fall off, and Control Linkages that fail...

@Thercgeek

Жыл бұрын

Haha, i think the model is more reliable in those areas. 😆

Really cool but the speed seems out of scale

@DPoner

Жыл бұрын

Yeah I was right. Okay the take off at .5 speed and it’s perfect.

Wonderful build and flight....congrats.......BUT the sound is just not acceptable!!!!

@rcnfo1197

Жыл бұрын

The plane was designed and built more than a decade ago with state of the art CF blades. But I agree, an upgrade of the fan blades would improve the sound and realism.

@shelleibach20

Жыл бұрын

@@rcnfo1197 Cool would be so much more scale....or even turbines...thast my choice of thrust... Great aircraft no matter what!!

@Thercgeek

Жыл бұрын

Haha, has some old school 4blade schubeler fans in it. Still good fans, just not as audibly pleasant as his latest fans. 😊

It’s mad I love flying RC planes more that anything in the world but model rc airliners do nothing for me.. I’d rather watch grass grow.. 😅

@Thercgeek

Жыл бұрын

Haha, I get it. Normally airliners don’t excite me much either, but I did enjoy seeing this one. It was very nicely built and had all the details I love to see with the spoilers and slats.