Having problem with the return spring and the lever cannot return back to its position correctly, hope this video can help you on how to fix it. Magura MT7 #magura #magurabrakes
Жүктеу.....
Пікірлер: 47
@TheSanDiegoSteveАй бұрын
I was able to straighten the spring out with needle nose pliers without taking everything apart. I only took the brake lever off the bars. Thank goodness. All that disassembly isn't my cup of tea.
@petedivine10 ай бұрын
Thank you!!! I was using some tie wrap to keep it together until I saw your video. Much appreciated. Fixed my Magura MT7s.
@janventer9413Ай бұрын
This video saved me a lot of money! Thanks
@MonoJonno Жыл бұрын
Thanks! My loose mt8 lever has been driving me bonkers. Its amazing how common this is.
@jerrycross12 жыл бұрын
Thanks so much, 'virtually' saved my MT8 lever. You made it look much easier than it was for me though! I found the only way I could do it was to hold the lever (between some soft wood of course) in the vice and then coax the spring into place. Be interesting if I hear back from Magura because I was convinced the spring was broken so asked if its possible to get a replacement. Cheers again, owe you a beer!
@OffRoadSyndicate
2 жыл бұрын
Oh yeah bro 😄👍, at first I thought it was broken as well, but when I open up the other side (which is no problem) to compare the spring only found that it was in the same shape😂
@richieclarkiepiano Жыл бұрын
Followed your fix. Sure was a little bit fiddly, but not really hard. Worked very well!
@OffRoadSyndicate
Жыл бұрын
nice one bro 👍😄
@BblpBurJIa3 Жыл бұрын
Only video in youtube that really helps! Thank you, bro!
@OffRoadSyndicate
Жыл бұрын
🤜🤛 welcome bro
@dejvo9997 Жыл бұрын
Thank you, you made my life easier.
@germantoledano11042 жыл бұрын
Thank you very much! I was looking this video since weeks!
@OffRoadSyndicate
2 жыл бұрын
Welcome bro, I was looking for the same video too, but couldn't find one, So decide to make one my self 😄
@arnonym3580 Жыл бұрын
Thanks. So good too know it will work, before taking apart👍
@dragonyos2 Жыл бұрын
Thx, its work for me too. This levers are sucks btw, planning to change the other mt7 lever if this will happen again. Still fine after smash 5 times to the ground
@MrCjrodriguez Жыл бұрын
Awesome! Thank you for sharing this fix. I thought the only way to resolve this was purchasing new lever blades... This is such a simple fix. I've been trying to figure out how to open the top cover of the master cylinder without breaking it. Have you been able to figure out how to do that?
@Dino_Mehinagic10 ай бұрын
Thx, nice video.
@efc010611 ай бұрын
Would you know where to source spare return springs?
@motogpmoto2 жыл бұрын
You can also return spring without this complete rebuilt. Idealy remove BT pin and then push the spring with flat screwdriver into to place and you are done.
@OffRoadSyndicate
2 жыл бұрын
Thank for the suggestion bro 👌, actually this is the 2nd time the spring come out from it location, I was try to straighten the spring a little bit, hopefully it will not easily come out again after that.
@motogpmoto
2 жыл бұрын
@@OffRoadSyndicate i have no idea how springs looks when new. But because i broke lever i have to order new one this week so will check it out
@OffRoadSyndicate
2 жыл бұрын
@@motogpmoto alright bro 👌👍😄
@chile217 Жыл бұрын
Thanks!
@robertochinchella65842 жыл бұрын
Thanks a lot!
@OffRoadSyndicate
2 жыл бұрын
You are welcome 👍😉
@shortystsgp3 ай бұрын
I was driving myself nuts thinking I installed something wrong when I changed out a lever…. Then it came to me a week later today when I realized the lever I changed out was on a whole different bike than this one.. Lol. Does nobody check the springs before they leave the factory? 🤦🏽🤘🏽💛
@robinng84892 жыл бұрын
Thanks for sharing
@OffRoadSyndicate
2 жыл бұрын
You are welcome Robin 😄
@markjames61298 ай бұрын
What a pain, these levers flick forwards a piece of piss, then this full strip to fix? Not happy with my brand new bike I’ve not ridden yet
@psychonaut0386 ай бұрын
My spring is good but it stil can do that 😅 I don't know what to do.
@avergreensyssvs5649 Жыл бұрын
Yeah because of u save me buying a new lever. Thumbs up owe u 2 beer.. bike shop are crooks just mention
@OffRoadSyndicate
Жыл бұрын
🤜🤛 alright bro haha😄
@jonienglish32319 ай бұрын
i hace a Magura MTS with BAT Adjuster - Does not WORK !!!!!!!!
@danielrobinson71446 ай бұрын
Sorry dude cant see a thing
@lucasp1714 Жыл бұрын
Happened to me on a ride lately. Seriously considering going back to Shimano. What a shit engineering.
@jamble7k
Жыл бұрын
you can use shimano levers with the magura pistons, no more shit plastic
@gevons2 жыл бұрын
Man that is so complicated just for a lever…
@OffRoadSyndicate
2 жыл бұрын
oh yeah, Magura 👍😆
@gevons
Жыл бұрын
@@OffRoadSyndicate thank you for the video! Helped me fix my lever.
@OffRoadSyndicate
Жыл бұрын
@@gevons 😄👍welcome bro
@avergreensyssvs5649
Жыл бұрын
Tks for the video indeed very helpful. Was told by an agent to replace the whole lever but than just came across your video which is also the same as my issue also is on the left side as well.
@OffRoadSyndicate
Жыл бұрын
@@avergreensyssvs5649 nice nice😄👍
@NRGPL2 жыл бұрын
Question my dear friend. I've noticed today that both levers at my Magura MT7 Pro can be extended in opposite way (outside the normal way). Will it be the same case as shown here?
@OffRoadSyndicate
2 жыл бұрын
Yup bro both levers can be extended in opposite way, but have to be careful not to over extended it, I was over extended the lever and the return spring was tear off....
@NRGPL
2 жыл бұрын
@@OffRoadSyndicate ok, i think I have the same case here. Will give it a try :)
Пікірлер: 47
I was able to straighten the spring out with needle nose pliers without taking everything apart. I only took the brake lever off the bars. Thank goodness. All that disassembly isn't my cup of tea.
Thank you!!! I was using some tie wrap to keep it together until I saw your video. Much appreciated. Fixed my Magura MT7s.
This video saved me a lot of money! Thanks
Thanks! My loose mt8 lever has been driving me bonkers. Its amazing how common this is.
Thanks so much, 'virtually' saved my MT8 lever. You made it look much easier than it was for me though! I found the only way I could do it was to hold the lever (between some soft wood of course) in the vice and then coax the spring into place. Be interesting if I hear back from Magura because I was convinced the spring was broken so asked if its possible to get a replacement. Cheers again, owe you a beer!
@OffRoadSyndicate
2 жыл бұрын
Oh yeah bro 😄👍, at first I thought it was broken as well, but when I open up the other side (which is no problem) to compare the spring only found that it was in the same shape😂
Followed your fix. Sure was a little bit fiddly, but not really hard. Worked very well!
@OffRoadSyndicate
Жыл бұрын
nice one bro 👍😄
Only video in youtube that really helps! Thank you, bro!
@OffRoadSyndicate
Жыл бұрын
🤜🤛 welcome bro
Thank you, you made my life easier.
Thank you very much! I was looking this video since weeks!
@OffRoadSyndicate
2 жыл бұрын
Welcome bro, I was looking for the same video too, but couldn't find one, So decide to make one my self 😄
Thanks. So good too know it will work, before taking apart👍
Thx, its work for me too. This levers are sucks btw, planning to change the other mt7 lever if this will happen again. Still fine after smash 5 times to the ground
Awesome! Thank you for sharing this fix. I thought the only way to resolve this was purchasing new lever blades... This is such a simple fix. I've been trying to figure out how to open the top cover of the master cylinder without breaking it. Have you been able to figure out how to do that?
Thx, nice video.
Would you know where to source spare return springs?
You can also return spring without this complete rebuilt. Idealy remove BT pin and then push the spring with flat screwdriver into to place and you are done.
@OffRoadSyndicate
2 жыл бұрын
Thank for the suggestion bro 👌, actually this is the 2nd time the spring come out from it location, I was try to straighten the spring a little bit, hopefully it will not easily come out again after that.
@motogpmoto
2 жыл бұрын
@@OffRoadSyndicate i have no idea how springs looks when new. But because i broke lever i have to order new one this week so will check it out
@OffRoadSyndicate
2 жыл бұрын
@@motogpmoto alright bro 👌👍😄
Thanks!
Thanks a lot!
@OffRoadSyndicate
2 жыл бұрын
You are welcome 👍😉
I was driving myself nuts thinking I installed something wrong when I changed out a lever…. Then it came to me a week later today when I realized the lever I changed out was on a whole different bike than this one.. Lol. Does nobody check the springs before they leave the factory? 🤦🏽🤘🏽💛
Thanks for sharing
@OffRoadSyndicate
2 жыл бұрын
You are welcome Robin 😄
What a pain, these levers flick forwards a piece of piss, then this full strip to fix? Not happy with my brand new bike I’ve not ridden yet
My spring is good but it stil can do that 😅 I don't know what to do.
Yeah because of u save me buying a new lever. Thumbs up owe u 2 beer.. bike shop are crooks just mention
@OffRoadSyndicate
Жыл бұрын
🤜🤛 alright bro haha😄
i hace a Magura MTS with BAT Adjuster - Does not WORK !!!!!!!!
Sorry dude cant see a thing
Happened to me on a ride lately. Seriously considering going back to Shimano. What a shit engineering.
@jamble7k
Жыл бұрын
you can use shimano levers with the magura pistons, no more shit plastic
Man that is so complicated just for a lever…
@OffRoadSyndicate
2 жыл бұрын
oh yeah, Magura 👍😆
@gevons
Жыл бұрын
@@OffRoadSyndicate thank you for the video! Helped me fix my lever.
@OffRoadSyndicate
Жыл бұрын
@@gevons 😄👍welcome bro
@avergreensyssvs5649
Жыл бұрын
Tks for the video indeed very helpful. Was told by an agent to replace the whole lever but than just came across your video which is also the same as my issue also is on the left side as well.
@OffRoadSyndicate
Жыл бұрын
@@avergreensyssvs5649 nice nice😄👍
Question my dear friend. I've noticed today that both levers at my Magura MT7 Pro can be extended in opposite way (outside the normal way). Will it be the same case as shown here?
@OffRoadSyndicate
2 жыл бұрын
Yup bro both levers can be extended in opposite way, but have to be careful not to over extended it, I was over extended the lever and the return spring was tear off....
@NRGPL
2 жыл бұрын
@@OffRoadSyndicate ok, i think I have the same case here. Will give it a try :)
@OffRoadSyndicate
2 жыл бұрын
@@NRGPL yup bro 👍😁